Fluke T130 Voltage ati Continuity Tester
Model: FLUKE-T130
Brand: Fluke
Ọrọ Iṣaaju
The Fluke T130 Voltage and Continuity Tester is a robust and reliable tool designed for electrical professionals. It features large, easy-to-use buttons, a bright backlit LED indicator, an LCD display, display hold, and clear audible and vibrating voltage indicators. This two-pole tester is essential for verifying the absence of voltage before working on any circuit, ensuring user safety and accurate measurements.
Image: The Fluke T130 Voltage and Continuity Tester, showing its yellow body, black probes, backlit LCD, and LED indicators.
Alaye Aabo
Always observe standard safety precautions when working with electrical equipment. Failure to do so may result in injury or damage to the tester or equipment under test.
- Ka ati loye gbogbo awọn ilana ṣaaju lilo.
- Do not use the tester if it appears damaged or operates abnormally.
- Verify the tester's operation on a known live source before and after use.
- Tẹle awọn koodu aabo agbegbe ati ti orilẹ-ede.
- Wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE).
- The tester is designed according to IEC EN 61243-3:2014 to verify the absence of voltage, even with discharged batteries.
- CAT IV 600 V, CAT III 690 V safety rating.
Ohun ti o wa ninu Apoti
The Fluke T130 package typically includes the following items:
- Fluke T130 Voltage ati Continuity Tester
- Rubber tip protector
- 2x GS38 Probe Tip Sheath
- 2x 4 mm Ø Probe Extensions
- Batiri AA 2 (ti a ti fi sii tẹlẹ tabi ti a fi kun lọtọ)
Ṣeto
Fifi sori batiri
The Fluke T130 requires 2 AA batteries for operation. These are typically included. To install or replace batteries:
- Wa ideri iyẹwu batiri ni ẹhin oluyẹwo.
- Use a suitable tool (e.g., a screwdriver) to open the compartment.
- Fi awọn batiri AA meji sii, ki o rii daju pe polarity ti o tọ (+ ati -).
- Ni aabo pa ideri kompaktimenti batiri ni aabo.
Probe Tip Accessories
Attach the appropriate probe tip accessories (GS38 Probe Tip Sheath or 4 mm Ø Probe Extensions) as required for your measurement application. Ensure they are securely fitted to the probe tips.
Awọn ilana Iṣiṣẹ
The Fluke T130 offers multiple ways to indicate the presence of voltage, including LED indicators, an LCD display, an audible tone, and tactile feedback (vibration).
Voltage Idiwon
- Ensure the tester is clean and in good working condition.
- Connect the two probes to the circuit or component you wish to test.
- The tester will automatically detect AC or DC voltage and display the reading on the LCD.
- LED indicators will illuminate corresponding to voltage levels (e.g., 12V, 24V, 50V, 120V, 230V, 400V, 690V).
- An audible tone and vibration will also indicate the presence of voltage.
- Use the "Display Hold" function to freeze the reading on the LCD if needed.
Igbeyewo Ilọsiwaju
- Rí i dájú pé agbára ìṣiṣẹ́ náà ti dínkù kí o tó ṣe ìdánwò ìtẹ̀síwájú.
- Connect the two probes across the component or wire you want to test for continuity.
- If continuity is present (low resistance), the continuity LED will illuminate, and an audible tone will sound.
Switchable Load (Ghost Voltage Suppression)
The T130 features a switchable load function to avoid the display of "ghost voltages" (induced voltages in open circuits). Press the designated button to activate the load, which draws more current from the circuit under test, allowing for a more accurate voltage reading and preventing nuisance tripping of Residual Current Devices (RCDs).
Atọka Yiyi Alakoso
For three-phase systems, the T130 can indicate phase rotation. Follow the instructions in the full user manual for detailed steps on performing this test.
Itoju
Ninu
Clean the tester's case with a damp cloth and mild detergent. Do not use abrasives or solvents. Ensure the tester is dry before storage or use.
Batiri Rirọpo
Replace batteries when the low battery indicator appears on the LCD or when the tester's performance degrades. Refer to the "Battery Installation" section under Setup for instructions.
Ibi ipamọ
Store the tester in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Oluyẹwo ko ni agbara lori. | Awọn batiri ti o ku tabi ti ko tọ ti fi sori ẹrọ. | Ropo awọn batiri, aridaju ti o tọ polarity. |
| Aipe voltage kika. | Ẹmi voltages; poor probe contact. | Activate switchable load; ensure firm probe contact. |
| No continuity indication. | Open circuit; faulty component. | Verify circuit integrity; test component separately. |
| Ifihan LCD jẹ́ dídín tàbí kí ó máa tàn yòò. | Batiri kekere. | Rọpo awọn batiri. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | FLUKE-T130 |
| Aabo Rating | CAT IV 600 V, CAT III 690 V |
| Orisun agbara | Agbara Batiri (Batiri AA 2 to wa) |
| Ọja Mefa | 13.39 x 3.43 x 2.24 inches |
| Iwọn Nkan | 0.28 kilogram (9.88 iwon) |
| Ifihan | Backlit LCD readout, LED indicators |
| Voltage Itọkasi | LED, LCD, Audible Tone, Tactile Feedback (Vibration) |
| Cable Durability | Dual insulated cable tested to 3x required bend angle |
| Pataki Awọn ẹya ara ẹrọ | Switchable load (ghost voltage suppression), Display Hold |
| Olupese | Fluke |
| Ilu isenbale | apapọ ijọba gẹẹsi |
Atilẹyin ọja ati Support
Fluke products are known for their quality and reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fluke webojula.
Onibara Support
For technical assistance, troubleshooting, or service, please contact Fluke customer support. Contact information can typically be found on the Fluke webaaye tabi ni apoti ọja.
When contacting support, please have your product model number (FLUKE-T130) and serial number (if applicable) ready.
