Ọrọ Iṣaaju
This manual provides comprehensive instructions for the StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter (Model: USB867WAC22). This adapter enables Wireless-AC connectivity for desktop or laptop computers via a USB 3.0 port, offering enhanced speed and range for demanding network applications.
The adapter supports dual-band operation (2.4GHz and 5GHz) with data rates up to 867 Mbps on the 5GHz band and up to 300 Mbps on the 2.4GHz band. It is backward compatible with 802.11a/b/g/n networks and features a 2T2R antenna design with a WPS button for easy setup.
Package Awọn akoonu
- StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter (USB867WAC22)
- Itọsọna ibere-kiakia
- CD Awakọ
Image: The StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter shown with its retail packaging and included driver CD.
Awọn ilana iṣeto
System Awọn ibeere
- Available USB 3.0 port (backward compatible with USB 2.0, but 3.0 recommended for optimal performance)
- Operating System: Windows 10, Windows 8, Windows 7, Windows Server 2016, Windows Server 2019, macOS (El Capitan 10.11, Sierra 10.12, High Sierra 10.13, Mojave 10.14), Linux.
Fifi sori awakọ
- Ṣe igbasilẹ Awọn Awakọ: Visit the official StarTech.com website and navigate to the support page for model USB867WAC22. Download the latest drivers compatible with your operating system. While a driver CD may be included, downloading the latest version online is recommended for best performance and compatibility.
- Fi Awọn awakọ sii: Run the downloaded driver installation package. Follow the on-screen prompts to complete the installation. Administrator privileges may be required.
- Eto atunbere: After the driver installation is complete, restart your computer if prompted.
Nsopọ Adapter
- Fi Adapter sii: Carefully insert the USB 3.0 AC1200 Wireless-AC Network Adapter into an available USB 3.0 port on your desktop or laptop computer. Ensure it is fully seated.
- Jẹrisi Asopọmọra: Once inserted, the adapter's indicator light should illuminate, indicating it is powered on and active. Your operating system should recognize the new network adapter.
Image: The adapter actively connected to a laptop, with its green indicator light illuminated, signifying operation.
Awọn ilana Iṣiṣẹ
Nsopọ si Nẹtiwọọki Alailowaya
- Wọlé sí Àwọn Ètò Nẹ́tíwọ́ọ̀kì:
- Windows: Click the Wi-Fi icon in the system tray (bottom-right corner of the taskbar).
- MacOS: Tẹ aami Wi-Fi ni ọpa akojọ aṣayan (igun apa ọtun oke ti iboju naa).
- Lainos: Access network settings through your distribution's system tray or settings menu.
- Yan Nẹtiwọọki: Àkójọ àwọn nẹ́tíwọ́ọ̀kì aláìlókùn tí ó wà yóò hàn. Yan nẹ́tíwọ́ọ̀kì tí o fẹ́ (SSID).
- Tẹ ọrọ igbaniwọle sii: If the network is secured, enter the network security key (Wi-Fi password) and click "Connect".
- WPS (Eto Aabo Wi-Fi): For routers supporting WPS, you can press the WPS button on the adapter and then on your router within two minutes to establish a secure connection without entering a password. Refer to your router's manual for WPS instructions.
- Jẹrisi Asopọmọra: Once connected, the Wi-Fi icon will indicate a successful connection, and you should have internet access.
Iṣapeye Iṣe
- Ibudo USB 3.0: Always use a USB 3.0 port for maximum data transfer speeds (up to 867 Mbps on 5GHz). USB 2.0 ports will limit performance.
- Iwọn 5GHz: For faster speeds and less interference, connect to the 5GHz band of your router if available. The 2.4GHz band offers wider range but lower speeds.
- Ibi olulana: Position your wireless router in a central location, away from obstructions and interference sources (e.g., microwaves, cordless phones).
- Awọn imudojuiwọn Awakọ: Ṣe àyẹ̀wò StarTech.com déédéé webAaye fun awọn awakọ imudojuiwọn lati rii daju pe iṣẹ ṣiṣe ti o dara julọ ati ibamu.
Itoju
- Ninu: Lo asọ asọ ti o gbẹ lati nu ohun ti nmu badọgba. Maṣe lo awọn olutọpa olomi tabi awọn aerosols.
- Ibi ipamọ: When not in use, store the adapter in a cool, dry place, ideally with its protective cap on the USB connector to prevent dust and damage.
- Awọn imudojuiwọn famuwia: Periodically check the StarTech.com support website for any available firmware updates for your adapter.
Laasigbotitusita
| Isoro | Owun to le Fa / Solusan |
|---|---|
| Adapter not recognized / No indicator light |
|
| Slow connection speeds |
|
| Awọn asopọ loorekoore |
|
| Ko le sopọ si Wi-Fi nẹtiwọki |
|
Awọn pato
- Awoṣe: USB867WAC22
- Iru Alailowaya: 802.11a/b/g/n/ac
- Oṣuwọn Gbigbe Data: Up to 867 Mbps (5GHz), Up to 300 Mbps (2.4GHz)
- Ni wiwo agbalejo: USB 3.0 (ibaramu sẹhin pẹlu USB 2.0)
- Iṣeto Antenna: 2 Transmitter/2 Receiver (2x2:2)
- Awọn ẹgbẹ igbohunsafẹfẹ: Dual band 2.4 GHz / 5 GHz
- Ibamu Eto Iṣiṣẹ: Windows 10, Windows 8, Windows 7, Windows Server 2016, Windows Server 2019, macOS (El Capitan 10.11, Sierra 10.12, High Sierra 10.13, Mojave 10.14), Linux
- Awọn iwọn (LxWxH): Isunmọ 5.08 x 2.09 x 0.79 inches (12.9 x 5.3 x 2.0 cm)
- Ìwọ̀n Nkan: Isunmọ 0.64 iwon (18.14 g)
- Àwọ̀: Dudu
- Ilu isenbale: Taiwan
Atilẹyin ọja ati Support
The StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter is backed by a StarTech.com warranty with free lifetime technical support.
For detailed warranty information or technical assistance, please visit the official StarTech.com support webojula tabi kan si wọn onibara iṣẹ taara.
Awọn orisun Ayelujara:
Ọja Pariview (Visuals)
Awọn aworan ọja
Image: The StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter with its protective cap removed, revealing the blue USB 3.0 connector.
Aworan: A oke-isalẹ view of the adapter, highlighting the StarTech.com logo and the indicator light area.
Aworan: A ẹgbẹ view of the adapter, clearly showing the WPS (Wi-Fi Protected Setup) button for easy network connection.
Image: The adapter actively connected to a laptop, with its green indicator light illuminated, signifying operation.
Awọn fidio ọja osise
Ko si awọn fidio ọja osise lati ọdọ olutaja wa fun ifibọ ni akoko yii.
