C2G Legrand 40881 50W Audio Amplifier Afowoyi olumulo

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of the C2G Legrand 40881 50W Audio Amplifier. Eyi amplifier is designed to support distributed audio systems in various environments, including classrooms and conference rooms, and is suitable for plenum space installations. It delivers 50 watts of power (25 watts per channel) and adheres to industry-standard 25/70 volt designs.

Ọja Pariview

The C2G 40881 Audio Amplifier offers robust features for versatile audio integration:

• Ohun Ampimuduro: Amplifies dynamic microphone or stereo audio signals, providing 25 watts of power per channel (50W total) to a sound reinforcement system.
• Input Versatility: Accepts 3.5mm stereo audio, RCA stereo audio, and 3.5mm microphone inputs.
• Iṣe idapọ: Automatically mixes audio from all three inputs (3.5mm, RCA, microphone) and sends the combined signal to the speaker outputs.
• Awọn aṣayan Iṣakoso: Supports RS232 control or signals from an industry-standard volume control.
• Public Address (PA) Sensor: Automatically mutes audio inputs when a public address signal is detected, ensuring clear announcements.
• Accessory Power Output: Provides 12 Volts DC and 500mA, suitable for powering compatible controllers like the TruLink A/V controller.
• Apẹrẹ ti o tọ: Features a built-in mounting bracket for secure installation.

Ohun ti o wa ninu Apoti

• C2G 40881 50W Audio Ampitanna
• AC Adapter
• AC Agbara okun
• Mounting Ears (2)
• 9-pin Captive Screw Plugs (2)
• Afowoyi Olumulo (iwe-ipamọ yii)

Aworan 1: Iwaju view of the C2G 40881 Audio Amplifier, showing power indicator, output indicator, and adjustable knobs for RCA, 3.5mm, and Mic In levels.

Aworan 2: Ẹyin view of the C2G 40881 Audio Amplifier, displaying 3.5mm input, RCA input, balance mic input, page sensitivity switch, L/MONO switch, speaker outputs, DC out, DC in, volume, RS232, and PA in terminals.

Image 3: Included accessories: AC adapter, AC power cord, two mounting ears, and two 9-pin captive screw plugs for terminal connections.

Ṣeto

1. Yọ awọn ohun elo kuro: Carefully remove all items from the packaging and verify that all components listed in "What's in the Box" are present.
2. Gbigbe (Aṣayan): If permanent installation is desired, use the provided mounting ears to secure the amplifier in a suitable location. Ensure adequate ventilation around the unit.
3. So Awọn Agbọrọsọ: Connect your 25V or 70V speakers to the "SPEAKER OUTPUTS" terminals on the rear of the amplifier using appropriate speaker wire. Ensure correct polarity (+ to + and - to -). The amplifier provides 25 watts per channel.
4. So Awọn orisun Olohun pọ:
   • For stereo audio, connect your source (e.g., media player, computer) to the RCA igbewọle tabi awọn 3.5mm INPUT lori ru nronu.
   • For a dynamic microphone, connect it to the BALANCE MIC IN 3.5mm input on the rear panel.
5. Sopọ Iṣakoso Latọna jijin (Aṣayan):
   • If using an RS232 control system, connect the control cable to the RS232 Àkọsílẹ ebute.
   • If using a standard volume control, connect it to the Iwọn didun Àkọsílẹ ebute.
6. Connect PA System (Optional): If integrating with a public address system, connect the PA signal to the PA IN Àkọsílẹ ebute.
7. Asopọ agbara: Connect the AC adapter to the "DC IN" port on the amplifier and then plug the AC power cord into a standard electrical outlet. The amplifier yoo agbara lori.

Pataki: Ensure all connections are secure before powering on the unit. Refer to the wiring diagrams for specific terminal block connections if available in supplementary documentation.

Awọn ilana Iṣiṣẹ

1. Titan/Apapa: Awọn amplifier powers on automatically when connected to an electrical outlet. There is no physical power button on the unit itself.
2. Ṣíṣe àtúnṣe Àwọn Ìpele Ìwọlé: Use the dedicated knobs on the front panel to adjust the input levels for RCA, 3.5mm, and MIC IN sources.
   • RCA: Adjusts the volume for the RCA stereo input.
   • 3.5mm: Adjusts the volume for the 3.5mm stereo input.
   • MIC NI: Adjusts the volume for the microphone input.

   Akiyesi: Awọn amplifier's mixing function combines all active input signals. Adjust individual levels to achieve the desired audio balance.

3. Iṣakoso Iwọn didun Ijade: The overall output volume can be controlled via the connected remote wired wall plate controller or RS232 system, if installed.
4. Ifamọ oju-iwe: The "PAGE SENSITIVITY" switch on the rear panel adjusts the sensitivity of the PA sensor. This determines how readily the amplifier mutes other audio when a public address signal is present. Adjust as needed for your PA system.
5. Mono/Stẹrio Yipada: The "L/MONO" switch on the rear panel allows you to select between stereo output or a summed mono output.

Itoju

• Ninu: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the amplifier. Do not use liquid cleaners or aerosols, as they may damage the unit.
• Afẹfẹ: Rii daju pe awọn ampÀwọn ihò afẹ́fẹ́ lifier kò dí. Afẹ́fẹ́ tó yẹ ṣe pàtàkì láti dènà ìgbóná jù.
• Iṣakoso USB: Lokọọkan ṣayẹwo gbogbo awọn asopọ okun lati rii daju pe wọn wa ni aabo ati laisi ibajẹ.
• Ibi ipamọ: Ti o ba titoju awọn ampìfọ́mọ́ra fún ìgbà pípẹ́, yọ agbára kúrò nínú rẹ̀ kí o sì tọ́jú rẹ̀ sí ibi tí ó tutù tí ó sì gbẹ, tí kò sí ìmọ́lẹ̀ oòrùn tààrà àti àwọn igbóná líle koko.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

The C2G 40881 Audio Amplifier is thoroughly inspected and tested to ensure quality and comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official C2G webojula.

For technical support, troubleshooting assistance, or warranty claims, please contact C2G customer service. Contact information can typically be found on the C2G webaaye tabi ninu apoti ọja rẹ.

Awọn orisun Ayelujara: Fun alaye ni afikun ati atilẹyin, o le ṣabẹwo si C2G Store on Amazon.