AL-KO DRAIN 20000 HD PREMIUM

1. Ifihan

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your AL-KO DRAIN 20000 HD PREMIUM submersible dirty water pump. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage or injury.

The AL-KO DRAIN 20000 HD PREMIUM is designed for pumping dirty water, featuring a robust stainless steel body for optimal corrosion protection and a powerful motor for high flow rates.

2. Alaye Aabo

Always observe the following safety precautions to prevent personal injury or damage to the pump:

• Ensure the power supply matches the specifications on the pump's rating plate.
• Do not operate the pump with a damaged power cable or plug.
• Never lift or carry the pump by its power cable. Use the integrated handle.
• Do not pump flammable, explosive, or corrosive liquids.
• Pa awọn ọmọde ati awọn eniyan ti ko ni aṣẹ mọ kuro ni fifa ẹrọ ti n ṣiṣẹ.
• Disconnect the pump from the power supply before any maintenance, cleaning, or when not in use.
• Rii daju pe fentilesonu to peye lakoko iṣẹ.
• The pump is equipped with a magneto-thermal motor protector that automatically shuts off the pump in case of overheating. Allow 15-20 minutes for cooling before automatic restart.

3. Ọja Ipariview

Fọto yii ṣe afihan alaye alaye kan view of the AL-KO DRAIN 20000 HD PREMIUM submersible dirty water pump. It highlights its robust black and red casing, the integrated float switch for automatic operation, and the connection point for the discharge hose. The design emphasizes durability and ease of connection.

Here, an individual is shown operating the AL-KO DRAIN 20000 HD PREMIUM pump, carefully lowering it into a pond. This illustrates the pump's application in natural water environments for drainage or transfer tasks, demonstrating its portability and ease of deployment.

This image depicts the AL-KO DRAIN 20000 HD PREMIUM pump submerged in water within a construction trench. It showcases the pump's capability for heavy-duty dewatering tasks in challenging environments, emphasizing its robust construction suitable for dirty water applications.

4. Eto

1. Ṣii silẹ: Carefully remove the pump and all accessories from the packaging. Inspect for any signs of damage.
2. Asopọ okun: Attach a suitable discharge hose to the pump's outlet. The universal adapter allows connection of commercial hoses of various sizes. Ensure the connection is secure to prevent leaks.
3. Àtúnṣe Ìyípadà Lílefó: The integrated attachment in the handle allows for simple and quick adjustment of the float cable. Adjust the float switch to set the desired ON and OFF levels for the pump. Ensure the float switch can move freely without obstruction.
4. Ibi: Place the pump on a stable, level surface in the water to be pumped. Ensure the pump is fully submerged if operating in automatic mode.
5. Asopọ agbara: Connect the power cable to a grounded electrical outlet that matches the pump's voltage requirements (230 V - 50 Hz).

5. Awọn ilana Iṣiṣẹ

1. Isẹ aladaaṣe: Once connected to power and submerged, the pump will automatically start when the water level rises and activates the float switch. It will stop when the water level drops and the float switch deactivates.
2. Iṣẹ afọwọṣe (ti o ba wulo): For continuous operation regardless of water level, the float switch can often be secured in an 'up' position. Refer to specific instructions for your model if this feature is desired.
3. Abojuto: Periodically check the pump's operation and the discharge flow. Ensure the pump is not running dry, as this can cause damage.
4. Idaabobo Alapapo: If the pump overheats, the built-in thermal motor protector will shut it down. Allow the pump to cool for approximately 15-20 minutes before it automatically restarts. Identify and resolve the cause of overheating (e.g., blocked intake, low water level).

6. Itọju

Itọju deedee n ṣe idaniloju pe fifa rẹ yoo pẹ to ati pe yoo ṣiṣẹ daradara.

• Ninu: After each use, especially when pumping dirty water, rinse the pump thoroughly with clean water to remove any debris or sediment.
• Inspect Intake: Regularly check the pump's intake screen for blockages. Clear any accumulated debris to maintain efficient flow.
• USB ati Plug Ayẹwo: Periodically inspect the power cable and plug for any signs of damage, fraying, or cracks. Do not use the pump if damage is found.
• Ṣíṣàyẹ̀wò Yíyípadà Lílefòó: Ensure the float switch moves freely and is not obstructed by debris.
• Ibi ipamọ: When storing the pump for extended periods, ensure it is clean and dry. Store in a frost-free environment.
• Itoju mọto: The hardened stainless steel motor shaft and stainless steel casing are designed for maintenance-free operation of the motor. No lubrication or specific motor maintenance is required.

7. Laasigbotitusita

Apá yìí ń sọ̀rọ̀ nípa àwọn ìṣòro tó wọ́pọ̀ tí o lè bá pàdé pẹ̀lú fifa omi rẹ.

8. Awọn pato

9. Atilẹyin ọja ati Support

AL-KO provides a standard warranty for this product. Additionally, you may be eligible for a 2+2 Years Warranty Extension upon online registration of your product. Please visit the official AL-KO website for details on warranty terms and conditions, and for product registration.

For technical support, spare parts, or service inquiries, please contact AL-KO customer service or an authorized service center. Refer to the AL-KO webojú-òpó wẹ́ẹ̀bù tàbí ìwé ìrajà rẹ fún ìwífún ìbáṣepọ̀.

AL-KO Official Webojula: www.al-ko.com