Ọja Pariview
The Valcom VIP-801A is an Enhanced Network Audio Port designed to extend voice access to a single zone of one-way paging over an IP-based Local Area Network (LAN) or Wide Area Network (WAN). This device facilitates page zone extension across the network without requiring a dedicated server.
Key features include one audio output, one audio input, two programmable form C relay closures, and an RJ-45 port for network connection. It supports 1 to 11 digit dial plans and offers easy Windows-based setup. An auxiliary audio input and contact closure options for audio indication and door unlocking are also available.
The VIP-801A supports various protocols including DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, and FTP. It utilizes the G.711 (ulaw) voice algorithm with echo suppression. The unit operates on 24 Vdc @ 250 mA and is IEEE 802.3af compatible (Class 3 device). Regulatory compliance includes FCC Part 15 Class A. It features an analog device interface for input (600 ohm impedance, VOX, and contact closure) and an analog output interface (less than 50 ohms impedance, 200 Hz - 3400 Hz frequency response, with relay closure). Please note that a power supply is not included (refer to VC-VIP-324 for compatible power supply).
olusin 1: Iwaju view of the Valcom VIP-801A unit. The image displays the device's front panel, featuring the Valcom brand name on the left, an RJ-45 Ethernet port, a red LED labeled "STATUS", and the model number "VIP-801A" on the right.
Eto ati fifi sori
Package Awọn akoonu
- Valcom VIP-801A Enhanced Network Audio Port unit
- (Power adapter not included, sold separately as VC-VIP-324)
Fifi sori ti ara
- Iṣagbesori: Position the VIP-801A in a secure location, away from excessive heat, moisture, or direct sunlight. Ensure adequate ventilation around the unit.
- Isopọ nẹtiwọki: Connect a standard RJ-45 Ethernet cable from your network switch or router to the RJ-45 port on the VIP-801A. Ensure the network provides Power over Ethernet (PoE) if you are not using an external power supply. The device is IEEE 802.3af compatible.
- Awọn isopọ Olohun:
- Connect your audio source (e.g., paging amplifier input) to the audio input port. The input impedance is 600 ohms.
- Connect your audio destination (e.g., speaker system, amplifier input) to the audio output port. The output impedance is less than 50 ohms.
- Relay Connections (Optional): If utilizing the programmable form C relay closures, connect the appropriate wiring for your application (e.g., door unlocking, audio indication).
- Asopọ agbara: If PoE is not available or preferred, connect a compatible 24 Vdc @ 250 mA power supply (e.g., Valcom VC-VIP-324) to the power input jack.
Iṣeto ni ibẹrẹ
The VIP-801A features easy Windows-based setup. Refer to the Valcom software utility for initial network configuration, IP address assignment (DHCP is supported), and dial plan setup (1 to 11 digits).
- Ensure your computer is on the same network segment as the VIP-801A for initial discovery.
- Use the Valcom configuration software to assign a static IP address or verify DHCP assignment.
- Configure the desired dial plan for paging access.
Awọn ilana Iṣiṣẹ
Paging Operation
Once configured, the VIP-801A allows voice access to a designated paging zone over your IP network. The specific method of initiating a page will depend on your IP PBX or VoIP system's integration with the VIP-801A.
- Bíbẹ̀rẹ̀ Ojú ìwé kan: Dial the configured extension or number associated with the VIP-801A from a compatible phone or softphone on your network.
- Gbigbe ohun: Your voice will be transmitted through the VIP-801A's audio output to the connected paging system.
- Atọka ipo: The red "STATUS" LED on the front panel indicates the operational status of the device. Refer to the troubleshooting section for LED behavior interpretation.
Relay Control (If Configured)
If the programmable form C relay closures are configured, they can be activated via network commands or specific dial codes, depending on your system's setup. This allows for functions such as door unlocking or activating external indicators.
Itoju
The Valcom VIP-801A is designed for reliable operation with minimal maintenance. Regular checks can help ensure continued performance.
- Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ìta ẹ̀rọ náà. Má ṣe lo àwọn ohun èlò ìfọmọ́ omi tàbí aerosol.
- Awọn imudojuiwọn famuwia: Periodically check the Valcom website for firmware updates. Firmware updates can improve performance, add features, or resolve issues. Follow the provided instructions carefully when performing updates.
- Awọn ipo Ayika: Rí i dájú pé àyíká iṣẹ́ náà wà láàrín ìwọ̀n otutu àti ọriniinitutu pàtó láti dènà ìbàjẹ́.
- Iduroṣinṣin USB: Inspect all connected cables (Ethernet, audio, power) periodically for damage or loose connections.
Laasigbotitusita
This section provides solutions to common issues you may encounter with the VIP-801A.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| No audio output during paging. |
|
|
| STATUS LED is off. | Ko si agbara. | Ensure power supply is connected and functional, or that PoE is active on the Ethernet port. |
| STATUS LED is blinking. | Network connectivity issue or device not registered. | Check Ethernet cable connection. Verify network settings and ensure the device can communicate with the network. Consult Valcom technical support if the issue persists. |
| Poor audio quality (e.g., echo, distortion). |
|
|
For further assistance, please contact Valcom Technical Support.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Awoṣe | VIP-801A (VC-VIP-801) |
| Išẹ | Networked Page Zone Extender |
| Ijade ohun | 1 |
| Input Audio | 1 |
| Relay Closures | 2 Programmable Form C |
| Asopọ nẹtiwọki | RJ-45 |
| Agbara ibeere | 24 Vdc @ 250 mA (IEEE 802.3af compatible, Class 3 device) |
| Ilana ti ni atilẹyin | DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, FTP |
| Alugoridimu Ohun | G.711 (64kbits/s)(ulaw) / echo suppression |
| Input Impedance | 600 ohm (analog device interface) |
| Imudaniloju ijade | Less than 50 ohms (analog output interface) |
| Idahun Igbohunsafẹfẹ | 200 Hz - 3400 Hz |
| Awọn iwọn | 11 x 9.5 x 4 inches |
| Iwọn | 1.65 iwon |
| Ilana | FCC Apá 15 Kilasi A |
Atilẹyin ọja ati Support
Alaye atilẹyin ọja
Specific warranty terms for Valcom products are typically provided at the point of purchase or on the official Valcom website. Please retain your proof of purchase for warranty claims. The warranty generally covers defects in materials and workmanship under normal use.
Akiyesi: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please handle with care and refer to safety guidelines.
Oluranlowo lati tun nkan se
For technical assistance, troubleshooting beyond this manual, or information on firmware updates, please contact Valcom Technical Support. You may need to provide your product model number (VIP-801A or VC-VIP-801) and serial number.
Visit the official Valcom weboju opo wẹẹbu fun alaye olubasọrọ, awọn ibeere ti a beere nigbagbogbo, ati awọn orisun afikun: www.valcom.com
