Ọrọ Iṣaaju
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Peerless SP850-UNL Full-Motion TV Wall Mount. This mount is designed to securely hold flat panel displays ranging from 32 to 80 inches, offering swivel and tilt capabilities for optimal viewing angles. Please read this manual thoroughly before beginning installation to ensure proper setup and to prevent damage or injury.
Nọmba 1: The Peerless SP850-UNL Full-Motion TV Wall Mount. This image displays the black metal mount with its articulating arms extended, showing the wall plate and the TV mounting plate with various holes for different VESA patterns. The design allows for extensive movement, including swivel and tilt, to achieve optimal viewing awọn igun.
Alaye Aabo
Always follow these safety guidelines to prevent personal injury or property damage:
- Ensure the mounting surface can support the combined weight of the mount and the display.
- Use appropriate tools and follow all installation steps carefully.
- Maa ko overtighten skru.
- Pa awọn ọmọde ati awọn ohun ọsin kuro lakoko fifi sori ẹrọ.
- Ti o ko ba ni idaniloju nipa eyikeyi apakan ti fifi sori ẹrọ, kan si alamọja ti o peye.
Eto ati fifi sori
Before you begin, ensure you have all necessary tools and hardware. Refer to the included hardware kit for specific fasteners.
1. Unpacking ati Ayẹwo paati
Carefully unpack all components and verify against the parts list provided in the packaging. Report any missing or damaged parts to Peerless customer support immediately.
2. Wall Awo fifi sori
- Locate the desired mounting position on the wall. Use a stud finder to identify wood studs or ensure you are mounting into concrete/brick with appropriate anchors.
- Hold the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal.
- Samisi awọn ipo liluho nipasẹ awọn iho lori odi awo.
- Drill pilot holes according to the recommended drill bit size for your wall type (refer to hardware kit instructions).
- Secure the wall plate to the wall using the provided lag bolts and washers. Ensure it is firmly attached.
3. Attaching Brackets to Display
- Lay your TV face down on a soft, clean surface to prevent scratches.
- Ṣe idanimọ awọn ihò iṣagbesori VESA lori ẹhin TV rẹ.
- Yan awọn skru ti o yẹ, awọn fifọ, ati awọn alafo lati inu ohun elo ohun elo ti o baamu awọn ihò iṣagbesori TV rẹ.
- Attach the vertical mounting brackets to the back of your TV, ensuring they are centered and securely fastened. Do not overtighten.
4. Mounting Display to Wall Plate
- Pẹlu iranlọwọ, farabalẹ gbe TV naa pẹlu awọn biraketi ti a so.
- Hook the brackets onto the wall plate. Ensure the TV is securely seated on the wall plate.
- Engage any safety locking mechanisms (if applicable) to prevent accidental dislodgement.
Ṣiṣẹ Oke
The SP850-UNL mount offers flexible positioning for your display.
Ṣíṣe àtúnṣe Swivel
Gently grasp the sides of your TV and pivot it left or right to achieve the desired viewing angle. The mount allows for a wide range of horizontal movement.
Titunse Tit
To adjust the vertical tilt, carefully push the top or bottom of the TV forward or backward. Some models may have knobs or levers to loosen/tighten the tilt mechanism; adjust as needed and re-tighten to secure the angle.
Extending/Retracting
To extend or retract the TV from the wall, gently pull or push the display. The articulating arms will move smoothly. Ensure cables are not pinched during movement.
Itoju
Regular maintenance ensures the longevity and safe operation of your Peerless TV mount.
- Ninu: Mu ese naa nu pẹlu asọ ti o gbẹ. Ma ṣe lo abrasive ose tabi epo.
- Awọn ayẹwo igbakọọkan: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
- Ṣayẹwo gbigbe: Ensure the swivel and tilt mechanisms move smoothly. If any stiffness is noted, check for obstructions or consult support.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Mount feels loose on wall | Wall plate not securely fastened; incorrect anchors used. | Re-check wall plate fasteners. Ensure mounting into studs or appropriate concrete/brick anchors. Consult a professional if unsure. |
| TV kii ṣe ipele | Wall plate installed unevenly; TV brackets not aligned. | Adjust the wall plate if possible, or re-install ensuring it is level. Check TV bracket alignment. |
| Difficulty adjusting swivel/tilt | Mechanisms are too tight; obstruction. | Check for any locking screws or knobs that need loosening. Ensure no cables are obstructing movement. |
Awọn pato
| Nọmba awoṣe | SP850-UNL |
| Brand | Aini ẹlẹgbẹ |
| Iṣagbesori Iru | Ògiri Ògiri |
| Iṣipopada Iru | Swivel, Tẹ |
| Maximum Compatible Display Size | 80 Inches (suitable for 32-80 inch displays) |
| Ọja Mefa | 33.1 x 11.12 x 4.1 inches |
| Iwọn Nkan | 30.2 iwon |
| Àwọ̀ | Dudu |
| UPC | 735029246398 |
Alaye atilẹyin ọja
Peerless products are designed for durability and reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Peerless website. Typically, Peerless offers a limited warranty covering defects in materials and workmanship under normal use.
Onibara Support
If you encounter any issues or have questions regarding your Peerless SP850-UNL mount, please contact Peerless customer support:
- Webojula: Visit the official Peerless webaaye fun awọn FAQ, iforukọsilẹ ọja, ati alaye olubasọrọ.
- Foonu: Refer to the product packaging or Peerless webojula fun onibara iṣẹ awọn nọmba foonu.
- Imeeli: Olubasọrọ atilẹyin nipasẹ imeeli fun awọn ibeere ti kii ṣe iyara.
When contacting support, please have your model number (SP850-UNL) and UPC (735029246398) ready.
