Ọrọ Iṣaaju
Thank you for choosing the AIMS Power 5000 Watt Pure Sine Power Inverter. This industrial-grade inverter is designed to convert 12 Volt DC power from batteries into 120 Volt AC pure sine wave power, suitable for a wide range of sensitive electronics and heavy-duty appliances. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your inverter.
Awọn ẹya pataki:
- 5000 Watt Continuous Power: Provides stable power for demanding applications.
- 10000 Watt Surge Capacity: Handles high startup loads from motors and appliances.
- 12 Volt DC Input: Compatible with standard 12V battery systems.
- Ijade Sine Wave Pure: Ensures clean, stable power for sensitive electronics.
- Selectable Frequency (50Hz/60Hz): Adaptable to various regional power standards.
- Iṣiṣẹ to gaju: Improved output performance even at low input voltages.
- Dual GFCI Outlets: Two 20A Ground Fault Circuit Interrupter outlets for enhanced safety.
- AC Terminal Block Connector: Direct connect option for hardwired applications.
- Remote On/Off Switch Capability: For convenient control.
- Aabo ti o ni kikun: Includes short circuit, overload, over-temperature, low/high voltage Idaabobo.
- 5 Function Protection LED Indicator: Provides visual status and fault alerts.
- Thermally Controlled Dual Cooling Fans: Ṣe idaniloju iwọn otutu iṣiṣẹ to dara julọ.
Alaye Aabo
Read all instructions and warnings before operating the inverter. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- Afẹfẹ: Rí i dájú pé afẹ́fẹ́ tó péye wà ní àyíká inverter. Má ṣe dí àwọn afẹ́fẹ́ itutu.
- Ayika: Install the inverter in a dry, cool, and well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Avoid exposure to water or excessive humidity.
- Asopọmọra: Use appropriate gauge wiring for DC input connections to prevent overheating and voltage drop. Ensure all connections are tight and secure.
- Ilẹ: Pa ẹ̀rọ inverter chassis náà dáadáa sí ilẹ̀ tó yẹ.
- Aabo Batiri: Work in a well-ventilated area when connecting batteries. Wear eye protection. Do not short-circuit battery terminals.
- Oṣiṣẹ ti o peye: Fifi sori ẹrọ ati iṣẹ yẹ ki o ṣe nipasẹ oṣiṣẹ ti o peye.
- Agbara fifuye: Do not exceed the inverter's continuous or surge power ratings.
AlAIgBA Ofin: Ọja yii le ni awọn ohun elo ti o ni ikilọ nipasẹ Idalaba California 65.
Eto ati fifi sori
Proper installation is crucial for the performance and longevity of your inverter. Follow these steps carefully.
1. Choosing a Location:
- Select a location that is dry, cool, and well-ventilated.
- Rii daju pe o to aaye to ni ayika inverter fun ategun afẹfẹ, paapaa ni ayika awọn onijakidijagan itutu.
- Mount the inverter securely on a flat, non-flammable surface.
2. DC Input Connections:
Connect the inverter directly to your 12V battery bank using heavy-gauge cables. Shorter cables and larger gauge wires minimize voltage drop and maximize efficiency.
- So ebute rere (+) ti inverter naa pọ mọ ebute rere (+) ti banki batiri naa.
- So ebute odi (-) ti inverter naa pọ mọ ebute odi (-) ti banki batiri naa.
- Ensure all connections are clean, tight, and free of corrosion.
olusin 1: Ẹyìn view of the inverter with DC input terminals and cooling fans.
olusin 2: Angled ru view showing the robust battery connection points.
3. AC Output Connections:
The inverter features two GFCI dual outlets and a direct connect AC terminal block.
- For standard appliances, plug them directly into the GFCI outlets.
- For hardwired applications, use the AC terminal block. Ensure proper wiring of Neutral, Earth (Ground), and Hot lines.
olusin 3: Iwaju view of the inverter with AC outlets and control panel.
4. Ilẹ:
Connect the inverter's chassis ground terminal to a reliable earth ground point. This is essential for safety and proper operation.
Awọn ilana Iṣiṣẹ
Once installed, operating your AIMS Power inverter is straightforward.
1. Titan tabi Pipa:
- Ensure all DC and AC connections are secure before powering on.
- Locate the red power switch on the front panel.
- To turn on, press the power switch to the 'ON' position. The green 'on' LED indicator should illuminate.
- To turn off, press the power switch to the 'OFF' position.
Figure 4: Close-up of the inverter's front panel, showing the power switch and indicators.
2. Aṣayan Igbohunsafẹfẹ:
A switch on the front panel allows you to select between 50Hz and 60Hz output frequency. Ensure this matches the requirements of your connected appliances.
3. Remote On/Off Switch:
The inverter supports a remote on/off switch for convenient operation from a distance. Connect the remote switch cable to the designated port on the inverter.
4. Lílóye Àwọn Àmì LED:
The 5 Function Protection LED indicator provides visual feedback on the inverter's status and any active protections. Refer to the troubleshooting section for specific fault indications.
Itoju
Regular maintenance ensures optimal performance and extends the lifespan of your inverter.
- Ninu: Periodically clean the exterior of the inverter with a dry cloth. Do not use liquid cleaners.
- Afẹfẹ: Ensure cooling vents are free from dust and debris. The dual cooling fans are thermally controlled and will activate as needed to maintain optimal temperature.
- Awọn isopọ: Regularly check all DC and AC connections for tightness and signs of corrosion. Loose connections can lead to overheating and poor performance.
- Ilera Batiri: Maintain your battery bank according to the battery manufacturer's recommendations. A healthy battery bank is essential for inverter performance.
Laasigbotitusita
This section provides guidance for common issues you might encounter. For complex problems, contact AIMS Power technical support.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Inverter ko tan. | No DC input power; Loose battery connections; Blown DC fuse (external); Inverter fault. | Ṣayẹwo batiri voltage; Verify all DC connections are secure; Check external DC fuse; Contact support if problem persists. |
| Ko si iṣẹ AC. | Overload protection; Low battery shutdown; Over-temperature shutdown; Short circuit on AC output; AC breaker tripped. | Reduce load; Recharge batteries; Allow inverter to cool; Check AC wiring for shorts; Reset AC breaker. |
| Inverter beeps or shuts down under load. | Low batiri voltage; Overload; Over-temperature. | Ṣayẹwo batiri voltage and charge level (Low Battery Shut Down: 10.0V); Reduce connected load; Ensure adequate ventilation. |
| Fans not running. | Normal operation (thermally controlled); Fan malfunction. | Fans only run when temperature reaches 40ºC. If inverter is hot and fans are not running, contact support. |
| Ẹfin tabi oorun sisun. | Ikuna paati inu. | Immediately disconnect power from the inverter. Do not attempt to operate. Contact AIMS Power support for repair or replacement. |
Awọn pato
Detailed technical specifications for the AIMS Power 5000 Watt Pure Sine Power Inverter.
| Sipesifikesonu | Iye |
|---|---|
| Lemọlemọfún wu Power | 5000 Wattis |
| Surge Output Power | 10000 Watts (1/2 second) |
| DC Input Voltage | 13.2 V (Operating Range: 10.5V - 15V) |
| O wujade Voltage (Ko si fifuye) | 120Vac +/- 3% |
| Iwajade Waveform | Wave Sine Sure |
| Igbohunsafẹfẹ Ijade | 50Hz or 60Hz (Selectable) |
| Iṣẹ ṣiṣe | 91% |
| No Load Current (Fan Off) | 2.6A (12V) |
| No Load Current (Fan On) | 4.4A (12V) |
| Low Battery Shut Down | 10.0V |
| Low Battery Return on Power | 11.2V |
| High Battery Shut Down | 15.9V |
| High Battery Return on Power | 15.0V |
| Lori Idaabobo iwọn otutu | -25ºC - 79ºC |
| Cooling Fan Activation Temperature | 40ºC |
| Awọn iwọn (L x W x H) | 25.59 x 8.86 x 6.22 inches |
| Iwọn | 25.7 iwon |
| AC iletslets | 2 x GFCI Dual Outlets (20A per block) |
Atilẹyin ọja ati Support
AIMS Power is committed to providing reliable products and excellent customer service.
Alaye Atilẹyin ọja:
This AIMS Power inverter typically comes with a 1-odun atilẹyin ọja covering parts and labor. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your product or contact AIMS Power directly.
Oluranlowo lati tun nkan se:
For technical assistance, troubleshooting, or warranty inquiries, please contact AIMS Power support:
- Foonu: 775-359-6703
- Iwe afọwọkọ olumulo osise (PDF): Gba PDF Afowoyi
- AIMS Power Store: Visit AIMS Power Store on Amazon
When contacting support, please have your product model number (PWRIG500012120S) and purchase date ready.
