Ìwé Àgbékalẹ̀ Olùlò Ìṣàkóso Latọna jijin DIRECTV RC72

Ọrọ Iṣaaju

The DIRECTV RC72 Remote Control is designed to provide seamless control over your DIRECTV Genie DVRs and clients in RF (Radio Frequency) mode, and other DIRECTV-branded receivers and DVRs in IR (Infrared) mode. This remote is essential for 2014 and newer Toshiba DIRECTV-Ready TVs, offering advanced functionality and user-friendly operation.

Awọn ẹya pataki pẹlu:

Next-generation design with updated IR codes for modern televisions.
Required for 2014 or newer Toshiba DIRECTV-ready TVs.
Compatible with all DIRECTV-ready (RVU) televisions.
Functions with older DIRECTV receivers when configured in IR mode.
Provides on-screen tips to assist with button usage and programming.

Ọja Pariview

Aworan: Iwaju view of the DIRECTV RC72 Remote Control. The remote is black and white, with a black top section containing navigation and function buttons, and a white bottom section with a numeric keypad. The DIRECTV logo is at the bottom.

Eto ati siseto

The RC72 remote can operate in two primary modes: RF (Radio Frequency) for Genie DVRs and clients, and IR (Infrared) for older DIRECTV receivers and other devices like TVs and audio systems.

Pairing with DIRECTV Genie DVRs (RF Mode)

Ensure your Genie DVR is powered on.
Point the RC72 remote towards the Genie DVR.
Tẹ mọlẹ IKU bọtini ati awọn WOLE button simultaneously until the green light at the top of the remote flashes twice.
A message should appear on your TV screen confirming the remote is now paired in RF mode.

Programming for TV and Audio Devices (IR Mode)

To control your TV's power and volume, or other audio devices, you will need to program the remote using specific codes. The remote utilizes an extensive database of included codes.

Tan ẹrọ ti o fẹ lati ṣe eto rẹ (fun apẹẹrẹ, TV rẹ).
On the RC72 remote, press and hold the IKU bọtini ati awọn Yan button simultaneously until the green light at the top of the remote flashes twice.
Enter the 5-digit code for your TV brand. Common codes can be found in your DIRECTV receiver's on-screen menu under "Remote Control Setup" or on the DIRECTV support webojula.
After entering the code, point the remote at the TV and press the AGBARA button. If the TV turns off, the code is correct.
If the TV does not turn off, repeat the process with another code for your brand until successful.
To program an audio device, follow similar steps, but select the appropriate device type during the programming process.

Note: On-screen tips provided by your DIRECTV receiver can guide you through the programming process effectively.

Awọn ilana Iṣiṣẹ

Familiarize yourself with the buttons and their functions for optimal use of your DIRECTV RC72 remote control.

Top Section Buttons

TAN/PA: Powers your DIRECTV receiver and programmed TV on or off.
Itọnisọna: Ṣe afihan itọsọna eto.
Akojọ: Accesses the main menu of your DIRECTV receiver.
Akojọ: Displays your recorded programs list.

Navigation and Control Buttons (Center Section)

Àwọn ọfà ìtọ́sọ́nà (Òkè, Ìsàlẹ̀, Òsì, Ọ̀tún): Navigate through menus and guides.
Yan: Jẹrisi yiyan.
Pada: Pada si iboju iṣaaju tabi akojọ aṣayan.
JADE: Jade ni ti isiyi akojọ aṣayan tabi iboju.
ALAYE: Ó ń fi ìwífún nípa ètò ìsinsìnyí tàbí ohun tí a yàn hàn.
Record (Red Dot): Ó bẹ̀rẹ̀ sí í gba ìforúkọsílẹ̀ ètò ìsinsìnyí.

Iwọn didun ati Iṣakoso ikanni

VOL (Volume Up/Down): Adjusts the volume of your programmed TV or audio device.
CH (Channel Up/Down): Changes the channel on your DIRECTV receiver.
DÁKÚN: Pa ohun naa di.
Ṣaaju: Pada si ikanni ti tẹlẹ.

Awọn iṣakoso ṣiṣiṣẹsẹhin

PADA: Rewinds playback.
SERE/SINMI: Ṣiṣẹ tabi da duro akoonu.
Siwaju Siwaju: Sare siwaju Sisisẹsẹhin.
DURO: Duro ṣiṣiṣẹsẹhin.

Bọtini Nọmba

0-9: Used for direct channel entry and other numeric inputs.
ENTER (input): Confirms numeric entries or switches to a specific input.
Dash (-): Used for sub-channels or other specific functions.

Itoju

Proper care will extend the life of your remote control.

Ninu: Use a soft, dry cloth to clean the remote. Do not use liquid cleaners or abrasive materials.
Rirọpo Batiri: When the remote's performance degrades or the indicator light no longer flashes, it's time to replace the batteries. The RC72 remote typically uses two AA batteries.
1. Ṣii ideri iyẹwu batiri ni ẹhin isakoṣo latọna jijin.
2. Yọ awọn batiri atijọ kuro.
3. Insert new AA batteries, ensuring correct polarity (+ and -).
4. Pa ideri batiri naa ni aabo.
Ibi ipamọ: Tọ́jú àgbékalẹ̀ ìpamọ́ náà sí ibi gbígbẹ, tí kò sí ibòmíràn tí ó lè mú kí ooru àti oòrùn tàn kálẹ̀.

Laasigbotitusita

If you encounter issues with your RC72 remote, try the following solutions:

Isoro	Owun to le Fa	Ojutu
Remote not responding to receiver.	Low batteries, remote not paired (RF), line of sight blocked (IR).	Replace batteries. Re-pair the remote with the receiver (see Setup section). Ensure no obstructions between remote and receiver/TV.
Remote controls receiver but not TV volume/power.	TV not programmed, incorrect TV code.	Re-program the remote for your TV using the correct 5-digit code (see Setup section). Try alternative codes for your TV brand.
Awọn bọtini jẹ alalepo tabi ko dahun.	Ẹ̀gbin tàbí ìdọ̀tí lábẹ́ àwọn bọ́tìnì.	Clean the remote with a soft, dry cloth. Avoid spills.
Remote light flashes but no action.	Remote is sending a signal, but receiver/TV is not responding or is out of range.	Ensure receiver/TV is powered on. Move closer to the device. Check if the remote is in the correct mode (RF/IR).

Awọn pato

Ẹya ara ẹrọ	Ẹ̀kúnrẹ́rẹ́
Nọmba awoṣe	FBA_RC72
Brand	DIRECTV
Ọja Mefa	8.8 x 1.6 x 3.4 inches
Iwọn Nkan	4 iwon
Àwọ̀	Dudu, Funfun
Pataki Ẹya	Ergonomic
Nọmba ti o pọju Awọn ẹrọ Atilẹyin	1 (main DIRECTV receiver, plus TV/audio device via programming)
Awọn ẹrọ ibaramu	DIRECTV Genie DVRs, DIRECTV-branded receivers, DIRECTV-ready (RVU) televisions, various televisions and audio devices (via IR programming)
Akọkọ Wa Ọjọ	Oṣu Kẹsan Ọjọ 16, Ọdun 2014

Atilẹyin

For further assistance, programming codes, or advanced troubleshooting, please refer to the official DIRECTV support resources:

Visit the official DIRECTV website for support documentation and FAQs.
Contact DIRECTV customer service for personalized assistance.
Utilize the on-screen help features available through your DIRECTV receiver.

Note: Specific warranty information for this accessory may be available through your DIRECTV service provider or the point of purchase.

	Bii o ṣe le ṣeto olugba DIRECTV kan fun Ipo RF A step-by-step guide from Solid Signal on configuring your DIRECTV receiver to operate in RF mode, allowing remote control without line-of-sight. This guide covers identifying your remote, checking receiver compatibility, navigating receiver menus, and performing the RF programming sequence. It also includes troubleshooting tips.
	DIRECTV PLUS HD Itọsọna olumulo DVR: Eto, Awọn ẹya ara ẹrọ, ati Laasigbotitusita Itọsọna olumulo okeerẹ fun DIRECTV PLUS HD DVR ati awọn olugba DIRECTV PLUS DVR, iṣeto ibora, awọn ẹya, gbigbasilẹ, laasigbotitusita, ati alaye atilẹyin ọja.
	Matrix Ibamu Latọna jijin DIRECTV - Ifihan agbara to lagbara Wa iṣakoso isakoṣo latọna jijin DIRECTV ti o pe fun awoṣe olugba rẹ pẹlu matrix ibaramu okeerẹ lati Ifihan agbara Solid. Awọn alaye IR ati RF ibamu.
	Apo Asopọ CINEMA DIRECTV: Iṣiṣẹ ati Awọn Itọsọna Pada Kọ ẹkọ bii o ṣe le mu Apo Asopọ CINEMA rirọpo rẹ ṣiṣẹ ki o tẹle awọn igbesẹ pataki lati da ohun elo atijọ rẹ pada, yago fun awọn idiyele ti kii ṣe ipadabọ. Pẹlu awọn ọna asopọ ati alaye olubasọrọ.
	Ẹrọ STREAM DIRECTV ati Itọsọna Olumulo Iṣakoso Latọna jijin Iwe afọwọkọ olumulo pipe fun ẹrọ DIRECTV STREAM ati isakoṣo latọna jijin rẹ, awọn alaye ohun elo ti o bo, awọn ẹya ara ẹrọ, iṣeto, ati ibamu FCC. Kọ ẹkọ bi o ṣe le lo ẹrọ DIRECTV STREAM rẹ fun ṣiṣanwọle, awọn ohun elo, ati diẹ sii.
	Itọsọna Olugba DIRECTV Plus: Eto, Awọn ẹya ara ẹrọ, ati Laasigbotitusita Ye DIRECTV Plus olugba (Awoṣe R15) pẹlu itọsọna olumulo yi. Kọ ẹkọ nipa iṣeto, iṣẹ iṣakoso latọna jijin, gbigbasilẹ eto, isanwo-fun-view, laasigbotitusita, ati awọn iṣọra ailewu fun iriri ere idaraya ile ti aipe.

DIRECTV FBA_RC72