Ọrọ Iṣaaju
The Elero RevoLine series offers intelligent drive solutions for various mounting situations. The Roltop M10 tubular drive is designed for roller shutters, awnings, and screens, providing reliable and efficient operation. This manual provides essential information for the safe and effective installation, operation, and maintenance of your Elero Roltop M10 drive.
Figure 1: Elero Roltop M10 Tubular Drive
This image shows the main product, the Elero Roltop M10 tubular drive, a cylindrical device typically installed inside a roller tube for automated operation of blinds or awnings.
Alaye Aabo
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the product.
- Fifi sori gbọdọ jẹ ṣiṣe nipasẹ oṣiṣẹ oṣiṣẹ ni ibamu pẹlu awọn koodu itanna agbegbe.
- Disconnect power before performing any installation, maintenance, or repair work.
- Ensure the drive is correctly sized for the application (e.g., weight of the roller shutter/awning).
- Do not allow children to play with the control devices.
- Keep hands and loose clothing clear of moving parts during operation.
- The drive is designed for indoor use or protected outdoor environments within the specified temperature range.
Awọn eroja To wa
The following components are typically included with your Elero Roltop M10 tubular drive:
- 1x Tubular Drive (Elero Roltop M10)
- 1x Adapter Kit for SW60 Shaft
- 1x 2-meter Plug-in Connection Cable
- (Motor bracket not included)
Awọn pato
Detailed technical specifications for the Elero Roltop M10 tubular drive:
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Olupese | Elero |
| Awoṣe | M10 |
| Awọn iwọn (Apapọ) | 76.3 x 11.3 x 10.3 cm |
| Iwọn | 2.28 kg |
| Ohun elo | Alloy steel, aluminum (gold), chrome-plated steel |
| Agbara Iru | Agbara akọkọ |
| Voltage | 230 Volts |
| Ọna fifi sori ẹrọ | Roller shutter shaft installation |
| Iwọn otutu | -20 to +60 iwọn Celsius |
| Pataki Awọn ẹya ara ẹrọ | Intelligent force measurement, soft brake (up to 20 Nm) |
| Ohun elo | Roller shutters, awnings, screens |
| Shaft Size Compatibility | From diameter = 50 mm (comes with SW60 adapter kit) |
| ti won won Torque | 10 Nm |
| Iyara Iwọn | 14 rpm |
| Ti won won Lọwọlọwọ | 0.6 A |
| Ti won won Power Lilo | 140 W |
| Kilasi Idaabobo (IP) | 44 |
| End Switch Range | 40 revolutions |
| Operating Duration (min S2) | 5 iṣẹju |
| Ode opin | 60 mm |
Figure 2: Technical Data Table for Elero Roltop Drives (M7/23, M10, M12/23, M20, M30, M40, M50)
This image displays a table with various technical specifications for different Elero Roltop drive models, including rated voltage, frequency, torque, speed, current, power consumption, shaft diameter, IP rating, end switch range, operating duration, length, weight, and operating temperature range.
Figure 3: Dimensional Drawing of Elero Roltop Drive
This image provides a technical drawing showing the dimensions of the Elero Roltop drive, including overall length (A), mounting length (B), diameter (Ø45), and dimensions of the connection end (55mm, 14mm, 33mm), indicating the pluggable connection cable.
Eto ati fifi sori
The Elero Roltop M10 drive is designed for installation within a roller shutter shaft. Ensure the shaft diameter is at least 50 mm. The drive comes with an adapter kit for SW60 shafts.
Awọn igbesẹ fifi sori ẹrọ:
- Igbaradi: Ensure power is disconnected. Prepare the roller shutter shaft and ensure it is clean and free of obstructions.
- Iṣagbesori Adapter: Attach the appropriate adapters from the SW60 kit to the drive head.
- Drive Insertion: Carefully insert the tubular drive into the roller shutter shaft. Ensure it is securely seated and aligned.
- Asopọmọra: Connect the 2-meter plug-in connection cable to the drive. Route the cable safely to the power supply, ensuring it is not pinched or damaged. Parallel wiring is possible.
- Iṣagbesori: Secure the drive within the shaft assembly. The drive is suitable for both left and right-hand mounting.
- Asopọ agbara: Connect the drive to the main power supply (230 Volts) via a suitable switch or control unit.
Ipari Ipo Atunse:
For Elero RevoLine drives with mechatronic limit switches, the end positions can be set using a mounting cable. The drive features intelligent force measurement and a quiet soft brake (up to 20 Nm).
- Mechatronic End Position Detection: The drive automatically detects terminal positions with a soft stop.
- Adjustable End Positions: Final positions can be set via the mounting cable.
- Idaabobo Apọju: Features intelligent force measurement and suspension protection (up/down and free, not for RolTop M10-K).
- Discharge at End Position: Discharge can be activated at the end position (not for RolTop M10-K).
Figure 4: End Position Programmability Options
This image displays a table outlining the programmability options for end positions (top and bottom), including "On Stop" (Auf Anschlag) and "Freely Adjustable" (Frei einstellbar) combinations.
Awọn ilana Iṣiṣẹ
Once installed and configured, the Elero Roltop M10 drive operates automatically based on the control signals it receives from your switch or automation system.
- Isẹ ipilẹ: Use your wall switch or remote control to move the roller shutter/awning up or down.
- Iduro Aifọwọyi: The drive will automatically stop at the pre-set upper and lower end positions.
- Intermediate Stops: If your control system supports it, you may be able to program intermediate stop positions.
- Soft Brake: The drive features a quiet soft brake for smooth stopping, especially for models up to 20 Nm.
- Idaabobo Apọju: The intelligent force measurement system helps protect the drive and the roller shutter/awning from damage due to obstructions.
Pull Force Tables:
Refer to the pull force tables to understand the maximum permissible weight for different roller shutter heights and shaft types.
Figure 5: Pull Force Tables for RevoLine M Drives
This image presents multiple tables detailing the maximum permissible weight (in kg) for a given roller shutter height (1.0m, 1.5m, 2.0m, 2.5m, 3.0m) across various RevoLine M drive models, considering different shaft types (e.g., 65° with 8mm, 11mm, 14mm wall thickness).
Itoju
The Elero Roltop M10 tubular drive is designed for minimal maintenance. However, regular checks can ensure long-term performance.
- Ninu: Keep the area around the drive and the roller shutter/awning free from dust and debris. Do not use abrasive cleaners.
- Ayẹwo USB: Periodically check the connection cable for any signs of wear, damage, or fraying. Replace if necessary.
- Ṣayẹwo Idilọwọ: Ensure the path of the roller shutter/awning is clear of obstructions during operation.
- Ayẹwo Ọjọgbọn: For complex issues or internal components, consult a qualified technician.
Laasigbotitusita
If you encounter issues with your Elero Roltop M10 drive, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Drive does not respond. | No power, faulty wiring, control unit issue. | Check power supply. Verify cable connections. Test control unit. |
| Drive stops prematurely. | Obstruction, incorrect end position setting, motor overload. | Remove obstructions. Re-adjust end positions. Check if the load exceeds specifications. |
| Awọn ariwo ti ko wọpọ lakoko iṣẹ. | Misalignment, worn components, internal issue. | Check for proper alignment. If noises persist, contact a qualified technician. |
| Roller shutter/awning does not fully open/close. | End positions incorrectly set. | Re-program the end positions using the mounting cable. |
If the problem persists after attempting these solutions, please contact Elero customer support or a certified service technician.
Atilẹyin ọja ati Support
Elero products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official Elero webaaye tabi kan si olupin agbegbe rẹ.
- Olupese: Elero
- Webojula: www.elero.com (Jọwọ ṣayẹwo fun agbegbe webawọn aaye)
- Awọn ohun elo: Information regarding spare parts availability is not directly provided in the product specifications. Please contact Elero support for details.
