Delta Ashlyn Single Handle Bathroom Faucet

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Delta Ashlyn Single Handle Bathroom Faucet. Designed with sleek, angular lines and soft edges, this faucet offers a modern aesthetic for your bathroom. It features Delta's DIAMOND Seal Technology for lasting performance and InnoFlex PEX supply lines for easy installation.

Image: Delta Ashlyn Single Handle Bathroom Faucet in Stainless finish, showcasing awọn oniwe-igbalode oniru.

Awọn ẹya pataki:

• DIAMOND Seal Technology: Reduces leak points and lasts twice as long as the industry standard.
• Integrated InnoFlex PEX Supply Lines: Included for simplified installation and reduced leak potential.
• WaterSense Labeled: Uses at least 20% less water than the industry standard.
• Atilẹyin ọja to Lopin: Backed by Delta Faucet's comprehensive warranty.
• Fifi sori Rọrun: Designed for single-hole or 3-hole, 4-inch configurations with an optional deck plate.

Ọja Pariview Fidio:

Alaye Aabo pataki

• Always turn off the water supply to the faucet before beginning any work.
• Wọ awọn gilaasi aabo lakoko fifi sori ẹrọ lati daabobo oju rẹ.
• Rii daju pe gbogbo awọn asopọ wa ni aabo lati ṣe idiwọ awọn n jo.
• Ti o ko ba ni idaniloju nipa eyikeyi igbesẹ, kan si alagbawo plumber ti o peye.
• Pa awọn ẹya kekere kuro lati ọdọ awọn ọmọde.

Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• Delta Ashlyn Single Handle Bathroom Faucet
• Integrated InnoFlex PEX Supply Lines
• Optional Deck Plate (for 3-hole installations)
• Coordinating Metal Pop-Up Drain Assembly
• Mounting Hardware (nuts, washers, bracket)
• Aerator Wrench

Awọn irinṣẹ ati Awọn ohun elo ti a beere

The following tools and materials are recommended for installation:

• Adjustable Wrench (2 recommended)
• Awọn gilaasi aabo
• Toweli tabi Rag
• Bucket (for catching water)
• Flashlight (for under-sink visibility)
• Plumber's Tape (if replacing drain)
• Silicone Sealant (for uneven sink surfaces)

Awọn ilana fifi sori ẹrọ

1. Mura silẹ fun Fifi sori ẹrọ

1. Turn off the water supply to the sink at the shut-off valves.
2. Ko agbegbe labẹ awọn ifọwọ fun wiwọle.
3. Remove your old faucet and clean the sink surface.

2. Mount the Faucet

1. Ti o ba ti rẹ ifọwọ ni o ni meta ihò, gbe awọn iyan dekini awo lori awọn iho. Rii daju pe gaseti ti joko daradara.
2. Feed the integrated supply lines and mounting stud of the faucet through the center hole of the sink.
3. Position the faucet squarely on the sink or deck plate.
4. From underneath the sink, secure the faucet using the provided mounting bracket and nut. Hand-tighten first, then use an adjustable wrench for final tightening, ensuring the faucet remains straight.

Image: Diagram illustrating faucet dimensions and installation options for 1-hole or 3-hole sinks, including the optional deck plate.

3. Connect Supply Lines

1. Connect the integrated InnoFlex PEX supply lines to your hot and cold water supply valves. The lines are color-coded (red for hot, blue for cold).
2. Hand-tighten the connections, then use an adjustable wrench for a final quarter-turn to ensure a secure, leak-free seal. Do not overtighten.
3. If the supply lines are too long, they can be spiraled to manage excess length, ensuring no kinks.

Image: Close-up of InnoFlex PEX supply lines, highlighting their flexibility and integrated design.

4. Fi sori ẹrọ Ikojọpọ Idomi

1. Follow the instructions provided with the coordinating metal pop-up drain assembly for proper installation into your sink.
2. Ensure all seals are correctly placed and connections are tightened to prevent leaks.

5. Flush the Faucet

1. Before turning on the water fully, remove the aerator from the faucet spout using the provided aerator wrench.
2. Laiyara tan awọn falifu ipese omi gbona ati tutu.
3. Run water through the faucet for approximately 30 seconds to flush out any debris that may have entered the lines during installation.
4. Turn off the water, re-install the aerator, and check all connections for leaks.

Ṣiṣẹ́ Fọ́ọ̀tì Rẹ

The Delta Ashlyn faucet features a single handle for easy control of water flow and temperature.

• Lati Tan/Pa: Gbé ọwọ́ náà sókè láti tan omi náà. Tẹ̀ ọwọ́ náà sí ìsàlẹ̀ láti pa omi náà.
• To Adjust Water Temperature: Move the handle to the left for hotter water and to the right for colder water.
• Lati Ṣatunṣe Sisan Omi: Bi a ṣe gbe imudani siwaju sii, ti o tobi ju sisan omi lọ.

Itoju ati Itọju

Proper care will ensure the longevity and appearance of your Delta faucet.

• Ninu: Nu faucet rẹ nigbagbogbo pẹlu asọ, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishes as they can damage the finish.
• Fifọ Aerator: If water flow decreases, the aerator may be clogged. Remove it using the provided wrench, rinse away any debris, and re-install.
• DIAMOND Seal Technology: This faucet features a diamond-embedded ceramic disc valve that requires no lubrication and eliminates wear on seals, ensuring leak-free operation for life.

Aworan: Exploded view diagram illustrating the internal components of the Delta Diamond Seal Technology, emphasizing its durability and leak-free design.

Laasigbotitusita Itọsọna

Awọn pato ọja

Atilẹyin ọja ati Onibara Support

Your Delta Ashlyn Faucet is backed by a S'aiye Atilẹyin ọja Limited. This warranty covers defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed.

For questions, assistance, or to make a warranty claim, please contact Delta Customer Service:

1-800-345-DELTA (3358)

For more information, visit the official Delta Faucet webojula.

Image: Icon representing the Lifetime Limited Warranty provided by Delta.