Ọrọ Iṣaaju
The Neewer 8-inch (20.3cm) Dual Camera Mount Tripod Bracket is designed to enhance your photography setup by allowing you to mount two cameras or accessories onto a single tripod or light stand. Constructed from durable aluminum, this bracket provides a stable platform for various photographic applications, including 3D stereo stereoscopic photography. Its adjustable mounting points offer flexibility for precise positioning of your equipment.
Ohun ti o wa ninu Apoti
- Dual Camera Mount Tripod Bracket (1)
Key Awọn ẹya ara ẹrọ
- Allows mounting of two cameras or accessories on a single tripod.
- 8 inches (20.3cm) in length for versatile positioning.
- Constructed from 0.2 inches (0.4cm) thick aluminum for durability.
- Equipped with 1/4-inch screws for DSLR cameras and other compatible devices.
- Features a 3/8-inch screw for mounting onto a tripod or light stand.
Awọn ilana iṣeto
- Attaching Devices to the Bracket:
The bracket features two adjustable 1/4-inch screws. To attach your camera, speedlight, or other accessory, align the device's 1/4-inch tripod socket with one of the screws on the bracket. Rotate the knurled knob underneath the screw clockwise until the device is securely fastened. Ensure the device is stable before proceeding.
Aworan: Isunmọ view of the bracket's adjustable 1/4-inch mounting screws.
Aworan: Example setup showing two speedlights mounted on the bracket.
- Mounting the Bracket to a Tripod/Stand:
The center of the bracket has a 3/8-inch threaded hole for mounting onto a tripod or light stand. Align this hole with the 3/8-inch screw on your tripod head or stand. Rotate the bracket clockwise until it is firmly attached. Some tripods may require a 1/4-inch to 3/8-inch adapter, which is not included.
Aworan: Pariview of the bracket showing 1/4-inch and 3/8-inch screw holes.
Awọn ilana Iṣiṣẹ
Once your devices are securely mounted, you can adjust their positions along the slotted tracks of the bracket. Loosen the knurled knobs slightly to slide the devices to your desired spacing, then tighten the knobs firmly to lock them in place. This allows for flexible arrangements, such as side-by-side camera setups for stereoscopic photography or combining a camera with a light source or microphone.
For 3D stereo stereoscopic photography, ensure both cameras are aligned precisely and capture images simultaneously for optimal results. Experiment with different distances between cameras to achieve varying depth effects.
Itoju
- Keep the bracket clean by wiping it with a soft, dry cloth after each use.
- Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Regularly check all screws and knobs for tightness to ensure secure mounting of equipment.
- Store the bracket in a dry, cool place away from direct sunlight and extreme temperatures.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Devices are not stable on the bracket. | Àwọn skru ìfìkọ́lé kò ní ìfúnpọ̀ tó. | Ensure all 1/4-inch knurled knobs are tightened firmly. |
| Bracket is wobbly on the tripod. | The 3/8-inch mounting screw is loose. | Tighten the bracket securely to the tripod's 3/8-inch screw. Verify tripod stability. |
| Cannot achieve desired spacing between devices. | Devices are too large or bracket length is insufficient. | Consider the dimensions of your equipment relative to the 8-inch bracket length. Adjust device orientation if possible. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Ọja Mefa | 7.99 x 1.18 x 0.79 inches (20.3 x 3 x 2 cm) |
| Iwọn Nkan | 2.56 iwon (72.57 giramu) |
| Ohun elo | Aluminum (0.2 inches / 0.4 cm thick) |
| Camera Mount Screws | 1/4-inch |
| Tripod Mount Screw | 3/8-inch |
| Àwọ̀ | Dudu |
| Nọmba awoṣe | 10082556@@##2 |
| UPC | 803201386429 |
Atilẹyin ọja ati Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official NEEWER webojula. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.
