1. Ifihan
The Novastar MCTRL660 is an independent master controller designed primarily for display rental services. This device facilitates screen configuration without the need for a computer, offering a streamlined solution for managing LED displays.
2. Ohun ti o wa ninu Apoti
Upon opening the package, verify that all components are present and in good condition. The standard package for the Novastar MCTRL660 typically includes the following items:
- Novastar MCTRL660 Sending Box Unit
- Okun agbara
- USB Cable for control
- DVI Cable
- Ìwé Ìtọ́sọ́nà Olùlò / Ìwé Àkọsílẹ̀
Figure 2.1: The Novastar MCTRL660 unit along with its essential cables and documentation, neatly packed within its box.
Figure 2.2: A closer look at the Novastar MCTRL660 unit, showcasing its front panel and the various cables supplied for connectivity.
Figure 2.3: The rear panel of the MCTRL660, detailing the input and output interfaces for video and control signals.
3. Eto
Follow these steps to set up your Novastar MCTRL660 for operation:
- Asopọ agbara: Connect the provided power cable to the MCTRL660's power input and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
- Input fidio: Connect your video source (e.g., computer, media player) to the MCTRL660 using either an HDMI or DVI cable. The MCTRL660 supports various input resolutions, including 1920×1200, 2048×1152, and 2560×960.
- LED Display Output: Connect the MCTRL660's four Ethernet output ports to your LED display receiving cards. Use standard Ethernet cables for these connections.
- Asopọ Iṣakoso: For initial configuration and advanced control, connect the MCTRL660 to a computer via the USB interface. This allows for detailed screen setup and parameter adjustments.
- Agbara Tan: Once all connections are secure, switch the power button on the MCTRL660 to the ON position. The device will initiate its startup sequence.
4. Ṣiṣẹ
The MCTRL660 is designed for user-friendly operation, allowing for screen configuration directly from the unit without requiring a connected computer for basic adjustments.
- Awọn iṣakoso Igbimọ iwaju: Utilize the navigation buttons and rotary knob on the front panel to access the menu system. The integrated display provides real-time feedback and menu options.
- Iṣeto iboju: Navigate through the menu to set up screen parameters such as resolution, refresh rate, and color depth. The MCTRL660's capacity supports up to 2.3 million pixels.
- Aṣayan Orisun Iṣawọle: Select the active video input source (HDMI or DVI) from the menu.
- Atunse Imọlẹ: Adjust the overall brightness of the LED display directly from the controller.
- Eto To ti ni ilọsiwaju: For more complex configurations, connect the MCTRL660 to a computer via USB and use the Novastar control software. This allows for detailed pixel mapping, calibration, and other advanced settings.
5. Itọju
Proper maintenance ensures the longevity and optimal performance of your Novastar MCTRL660.
- Ninu: Regularly clean the exterior of the unit with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as they can damage the surface or internal components. Ensure ventilation openings are free from dust and debris.
- Awọn ipo Ayika: Operate the MCTRL660 in a clean, dry environment with adequate ventilation. Avoid exposure to extreme temperatures, high humidity, or direct sunlight.
- Iṣakoso USB: Rí i dájú pé gbogbo àwọn wáyà náà so pọ̀ dáadáa, wọn kò sì ní ṣòro láti lò. Máa ṣàyẹ̀wò wáyà náà lẹ́ẹ̀kọ̀ọ̀kan fún àmì ìbàjẹ́ tàbí ìbàjẹ́ èyíkéyìí.
- Awọn imudojuiwọn famuwia: Check the official Novastar website periodically for firmware updates. Keeping the firmware updated can improve performance, add new features, and resolve potential issues.
6. Laasigbotitusita
If you encounter issues with your MCTRL660, refer to the following troubleshooting guide:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Power cable disconnected; Power outlet fault; Unit power switch off | Ṣàyẹ̀wò ìsopọ̀ okùn agbára; dán ibi tí agbára ń jáde wò; Rí i dájú pé switi agbára wà ní ON |
| No video output on LED display | Input cable loose/damaged; Incorrect input source selected; Output Ethernet cables loose/damaged; LED display not configured correctly | Verify HDMI/DVI cable connection; Select correct input source on MCTRL660; Check all 4 Ethernet output cables; Reconfigure LED display settings via MCTRL660 or software |
| Display shows abnormal colors or flickering | Incorrect display parameters; Cable interference; Faulty receiving card | Check resolution, refresh rate, and color depth settings; Ensure cables are not near strong electromagnetic fields; Test with a different receiving card if possible |
| Kò le sopọ̀ nípasẹ̀ USB | USB cable fault; Driver not installed; Software issue | Try a different USB cable/port; Install Novastar drivers on PC; Restart control software and MCTRL660 |
7. Awọn pato
Key technical specifications for the Novastar MCTRL660:
- Ipinnu Input: 1920×1200, 2048×1152, 2560×960 (width and height can be specially defined by customers)
- Agbara: 2.3 milionu awọn piksẹli
- Ọna Iṣakoso: USB Interface
- Fídíò Àwòrán HDMI/DVI
- Oju-ọna Ijade: 4 Ethernet ibudo
- Ìwọ̀n Nkan: Ni isunmọ 13.12 poun
- Awọn iwọn idii: Isunmọ 21.88 x 15.75 x 6.88 inches
- Àwọ̀: Dudu
- Olupese: Novastar
- Orisi Asopọmọra: HDMI
- Awọn ẹrọ ibaramu: Monitor, Television, Projector, Gaming Console
- Iru USB: DVI, HDMI
8. atilẹyin ọja Information
For detailed warranty information regarding your Novastar MCTRL660, please refer to the warranty card included with your product or visit the official Novastar webojula. Awọn ofin atilẹyin ọja le yatọ nipasẹ agbegbe ati alagbata.
9. Atilẹyin
Should you require technical assistance, have questions about product functionality, or need to report an issue, please contact Novastar customer support. You can typically find contact information, FAQs, and additional resources on the official Novastar website. Ensure you have your product model (MCTRL660) and any relevant purchase details ready when contacting support.
