Ìwé Ìtọ́sọ́nà Olùlò Clearaudio Concept MM Turntable

1. Ifihan

The Clearaudio Concept MM Turntable is an exceptional audio component designed to deliver high-fidelity sound reproduction from your vinyl records. Featuring an exclusive magnetic bearing system and a pre-mounted Classic MM cartridge, this turntable offers a refined and dynamic listening experience. Its robust construction, utilizing high-quality alloy and engineered wood, ensures stable and precise playback.

Awọn ẹya pataki pẹlu:

• Pre-mounted Classic MM (Moving Magnet) cartridge for immediate use.
• Exclusive magnetic bearing for ultra-low friction and smooth platter rotation.
• Belt-drive motor for stable speed and reduced vibrations.
• Integrated tonearm (CF tonearm) designed for optimal tracking.

2. Ohun ti o wa ninu Apoti

Lẹhin ṣiṣi silẹ, jọwọ rii daju pe gbogbo awọn paati wa ati ni ipo to dara:

• Clearaudio Concept MM Turntable unit
• Pre-mounted Classic MM cartridge/stylus
• Ideri eruku
• Power supply unit (with cable)
• Wakọ igbanu
• Pẹpẹ

Ti awọn ohun kan ba nsọnu tabi bajẹ, jọwọ kan si alagbata rẹ lẹsẹkẹsẹ.

3. Eto Itọsọna

Careful setup is crucial for optimal performance of your Clearaudio Concept MM Turntable.

3.1 Ibi

Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

3.2 Unpacking ati Apejọ

1. Gently remove the turntable from its packaging.
2. Place the main plinth on your chosen surface.
3. Carefully place the platter onto the spindle. The magnetic bearing system will guide it into place.
4. Fi ìgbànú ìwakọ̀ náà sí àyíká ìfàmọ́ra mọ́tò àti ẹ̀gbẹ́ inú àwo náà.
5. Gbe awọn eruku ideri lori turntable.

3.3 Tonearm and Cartridge Adjustment

Your Clearaudio Concept MM Turntable comes with a pre-mounted Classic MM cartridge. While factory-set, fine-tuning may be required for optimal sound and stylus longevity.

• Ipa Titele: The recommended tracking force for the Classic MM cartridge is typically around 2.0 grams. Due to the magnetic suspension, it is recommended to set the tracking force at the height of the platter for accurate readings. Use a digital stylus force gauge for precision.
• Anti-Skating: The anti-skating adjustment is located underneath the base of the platter. This adjustment counteracts the inward force on the tonearm, ensuring even wear on the stylus and proper channel balance. Adjust it carefully while playing a record or using a test record.
• VTA (Vertical Tracking Angle) / Azimuth: These are typically factory-set for the pre-mounted cartridge. Refer to advanced setup guides if further adjustment is desired.

Olusin 3.1: Pariview of the Clearaudio Concept MM Turntable, showing the platter, tonearm, and speed selection knob.

3.4 Asopọmọra

Connect the turntable to your audio system:

1. Connect the RCA audio cables from the turntable's output to the "Phono MM" input on your amplifier or AV receiver. If your amplifier does not have a dedicated "Phono MM" input, you will need an external phono preamplifier.
2. Connect the ground wire from the turntable to the ground terminal on your amplifier tabi phono preamplifier to minimize hum.

3.5 Asopọ agbara

Connect the power supply unit to the turntable's power input, then plug it into a suitable wall outlet. Ensure the power switch is in the OFF position before connecting.

4. Awọn ilana Iṣiṣẹ

4.1 Titan / Pa a

Locate the power switch, typically integrated with the speed selection knob. Turn the knob to the desired speed (33, 45, or 78 RPM) to power on the turntable. Turn it to the 'Off' position to power off.

4.2 Yiyan Iyara

The Clearaudio Concept MM Turntable supports multiple playback speeds:

• 33 ⅕ RPM: For standard LPs (Long Play records).
• 45 RPM: For singles and some audiophile pressings.
• 78 RPM: For shellac records (requires a dedicated 78 RPM stylus, not included).

Select the appropriate speed using the control knob on the plinth.

4.3 Ti ndun igbasilẹ kan

1. Gbe igbasilẹ kan sori apẹrẹ.
2. Select the correct playback speed.
3. Gbe apa ohun orin soke nipa lilo lefa ika.
4. Carefully position the tonearm over the desired starting groove of the record.
5. Gently lower the cueing lever to allow the stylus to descend onto the record.
6. Ṣatunṣe iwọn didun lori rẹ amplifier.

4.4 Idaduro Sisisẹsẹhin

1. Gbe apa ohun orin soke nipa lilo lefa ika.
2. Return the tonearm to its rest.
3. Lower the cueing lever.
4. Turn the speed selection knob to the 'Off' position to power down the turntable.
5. Replace the dust cover to protect the turntable from dust.

5. Itọju

Regular maintenance will ensure the longevity and optimal performance of your turntable.

• Ideri Ekuru: Always use the dust cover when the turntable is not in use to prevent dust accumulation on the platter, tonearm, and stylus.
• Cleaning the Plinth and Platter: Use a soft, dry, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
• Ìmọ́tótó Stylus: Gently clean the stylus regularly using a dedicated stylus brush or cleaning fluid. Always brush from back to front.
• Igbanu Wakọ: Periodically inspect the drive belt for wear or stretching. Replace it if it appears loose or cracked, as this can affect speed stability.
• Rirọpo Katiriji: The stylus (needle) of your cartridge will wear over time. Consult a professional or refer to the cartridge manufacturer's guidelines for replacement intervals.

6. Laasigbotitusita

Eyi ni diẹ ninu awọn ọran ti o wọpọ ati awọn ọna abayọ wọn:

If the problem persists, please contact your authorized Clearaudio dealer or support.

7. Awọn pato

8. Atilẹyin ọja ati Support

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Clearaudio dealer. Clearaudio products are known for their quality and durability, and support is available through their official channels.

For technical assistance or service inquiries, please contact your local Clearaudio distributor or visit the official Clearaudio webaaye fun awọn alaye olubasọrọ.