1. Ifihan
Thank you for choosing the Aqualux Pool Blaster Max Li. This cordless electric vacuum cleaner is designed for efficient and convenient cleaning of pools and spas. Its powerful suction and battery operation allow for thorough cleaning without the need for hoses or external power sources. Please read this manual carefully before operating the device to ensure proper use and maintenance.
2. Alaye Aabo
- Always disconnect the charger from the unit before use or maintenance.
- Do not operate the vacuum out of water. The motor is designed for underwater use and requires water for cooling.
- Jeki ọwọ, irun, ati awọn aṣọ alaimuṣinṣin kuro lati awọn ẹya gbigbe.
- Do not allow children to operate this device. Adult supervision is required.
- Use only the charger supplied with the unit.
- Tọju ẹyọ naa ni itura, aye gbigbẹ nigbati ko si ni lilo.
- Do not attempt to open or repair the battery pack or motor housing. Refer all servicing to qualified personnel.
3. Package Awọn akoonu
Jẹrisi pe gbogbo awọn ohun kan wa ninu package:
- Pool Blaster Max Li Vacuum Unit
- Rechargeable Lithium-Ion Battery (integrated)
- Ṣaja batiri
- Reusable Filter Bag
- Adjustable Wide Head
- Pole Adapter (for standard telescopic poles)
4. Ọja Ipariview
Familiarize yourself with the main components of your Pool Blaster Max Li.
Figure 4.1: The Aqualux Pool Blaster Max Li cordless vacuum cleaner, showing its ergonomic design and attachment points.
The unit consists of the main body housing the motor and battery, a removable filter bag compartment, and an adjustable wide head for efficient debris collection. The charging port is located on the main body.
5. Eto ati gbigba agbara
5.1. Ngba agbara si Batiri naa
Before first use, fully charge the battery. The charging port is designed for secure connection.
Figure 5.1: Detail of the charging port on the vacuum unit.
Figure 5.2: Connecting the charger to the Pool Blaster Max Li. Ensure a firm connection.
- Locate the charging port on the vacuum unit.
- So okun gbigba agbara pọ mọ ibudo naa.
- Pulọọgi ṣaja sinu ọna itanna boṣewa kan.
- Allow 8-10 hours for a full charge. The indicator light on the charger will change when charging is complete (refer to charger instructions for specific light behavior).
5.2. Apejọ
- Insert the reusable filter bag into its designated compartment. Ensure it is securely seated.
- Attach the adjustable wide head to the front of the vacuum unit. It should click into place.
- If using with a telescopic pole, attach the pole adapter to the vacuum unit, then slide your standard telescopic pole into the adapter.
6. Isẹ
The Pool Blaster Max Li is designed for easy underwater operation.
Figure 6.1: The vacuum unit submerged and actively cleaning the pool floor.
Figure 6.2: The vacuum effectively collecting various debris from the pool bottom.
Figure 6.3: The vacuum in operation, demonstrating the water flow and suction capability.
- Rii daju pe batiri ti gba agbara ni kikun.
- Submerge the vacuum unit completely in the water. Ensure no air is trapped inside.
- Turn on the unit using the power switch (location may vary, typically near the handle).
- Slowly guide the vacuum across the pool or spa surfaces you wish to clean. Overlap passes to ensure complete coverage.
- The vacuum will collect debris into the filter bag. Monitor the suction power; if it decreases, the filter bag may need emptying.
- After cleaning, turn off the unit before removing it from the water.
- Remove the unit from the water and immediately proceed to maintenance.
7. Itọju
Regular maintenance ensures optimal performance and extends the life of your Pool Blaster Max Li.
7.1. Cleaning the Filter Bag
The filter bag should be cleaned after each use or when suction power diminishes.
- Remove the filter bag from the vacuum unit.
- Empty collected debris into a waste receptacle.
- Rinse the filter bag thoroughly with a garden hose or under a faucet until clean.
- Allow the filter bag to air dry completely before storing or reinserting.
7.2. Ìmọ́tótó àti Ìtọ́jú Ẹyọ
- Rinse the exterior of the vacuum unit with fresh water after each use.
- Wipe down the unit with a soft cloth.
- Ensure the unit is completely dry before charging or storing.
- Store the vacuum in a cool, dry place, away from direct sunlight and extreme temperatures.
- Recharge the battery regularly, even during periods of non-use, to maintain battery health.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Igbale ko ni tan. | Batiri ko gba agbara. | Gba agbara si batiri fun wakati 8-10. |
| Yipada agbara wa ni pipa. | Rii daju pe iyipada agbara wa ni ipo 'ON'. | |
| Agbara afamora kekere. | Filter bag is full or clogged. | Empty and clean the filter bag thoroughly. |
| Debris lodged in suction intake. | Turn off the unit and remove any obstructions from the intake. | |
| Gbigba agbara batiri jẹ kekere. | Saji si batiri. | |
| Unit duro nigba isẹ ti. | Batiri ti dinku. | Saji si batiri. |
| Overheating Idaabobo mu ṣiṣẹ. | Turn off the unit, remove from water, and allow it to cool down for 30 minutes before restarting. Ensure it is fully submerged during operation. |
9. Imọ ni pato
- Awoṣe: NE4382
- Brand: Aqualux
- Orisun Agbara: Agbara Batiri
- Iru Batiri: Litiumu-Iwọn
- Batiri Voltage: 18 Volts
- Akoko Ṣiṣe: Up to 1 hour (on full charge)
- Akoko gbigba agbara: 8-10 wakati
- Cleaning Surface Area: Approximately 164.5 m³/h
- Ìwọ̀n Nkan: 3.2 kilo
- Awọn iwọn (L x W x H): 45.97 cm x 27.18 cm x 20.57 cm
- Suction Head Width: 27.3 cm
- Ijinle Omi Kere: 40 cm
- Ohun elo: Ṣiṣu
- Àwọ̀: Buluu
- UPC: 894331001016
10. Atilẹyin ọja ati Onibara Support
For warranty information or customer support, please refer to the documentation provided with your purchase or contact Aqualux customer service through their official website or authorized retailers. Keep your proof of purchase for any warranty claims.
