Elero VarioTel 2 5+1 Channel 868 MHz Manual Transmitter User Manual

1. Ifihan

Thank you for choosing the Elero VarioTel 2 5+1 Channel 868 MHz Manual Transmitter. This device is designed for convenient wireless control of various applications such as roller shutters, awnings, blinds, lighting, and heating systems. This manual provides essential information for the safe and efficient operation of your transmitter. Please read it thoroughly before use and retain it for future reference.

2. Awọn ilana aabo

• Jeki ẹrọ naa kuro ni arọwọto awọn ọmọde.
• Do not expose the transmitter to moisture, extreme temperatures, or direct sunlight.
• Ma ṣe gbiyanju lati ṣii tabi tun ẹrọ naa funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ.
• Ensure correct battery polarity when installing or replacing batteries.
• Sọ awọn batiri ti a lo ni ibamu si awọn ilana agbegbe.
• This device operates on 868 MHz frequency. Ensure no interference with other devices operating on the same frequency.

3. Ọja Ipariview

The Elero VarioTel 2 features a user-friendly design for intuitive control.

Figure 1: Elero VarioTel 2 Manual Transmitter. This image shows the white remote control with a black base. It features a circular channel selector with green indicators, three main control buttons (up, stop/program, down), and a small circular button at the bottom. The Elero logo is visible on the black base.

Awọn eroja pataki:

1. Oluyan ikanni: Circular button with LED indicators to select one of the 5 individual channels or the master channel (channel 6).
2. Bọtini Soke: Activates the connected device (e.g., raises a shutter).
3. Stop/Program Button: Stops the current movement or is used for programming functions.
4. Bọtini isalẹ: Activates the connected device (e.g., lowers a shutter).
5. Ipo LED: Indicates transmission status and battery level.
6. Programming Button (small circular button at bottom): Used for advanced programming and pairing.

4. Eto

4.1 Fifi sori batiri

The Elero VarioTel 2 requires batteries for operation (batteries are not included). Please use the specified battery type (e.g., CR2430, check device compartment for exact type if not specified here).

1. Locate the battery compartment cover on the back of the transmitter.
2. Open the cover using a small screwdriver or coin.
3. Insert the battery(ies) according to the polarity markings (+/-) inside the compartment.
4. Pa ideri batiri naa ni aabo.

4.2 Pairing with a Receiver

To control a device, the transmitter must first be paired with a compatible Elero receiver. The exact pairing procedure may vary depending on the receiver model. Refer to the receiver's instruction manual for detailed pairing steps. Generally, the process involves:

1. Put the receiver into programming mode (usually by pressing a button on the receiver).
2. Select the desired channel on your VarioTel 2 transmitter using the channel selector.
3. Press the small programming button on the bottom of the VarioTel 2 transmitter. The receiver should acknowledge the pairing (e.g., by a short movement of the connected device or an LED indicator).
4. Test the connection by pressing the Up, Stop, and Down buttons.

Note: For multi-channel receivers, ensure you pair each channel individually or as a group as required.

5. Awọn ilana Iṣiṣẹ

5.1 ikanni Yiyan

The VarioTel 2 allows control of up to 5 individual channels plus a master channel (channel 6) that controls all paired devices simultaneously.

• Press the circular Aṣayan ikanni button repeatedly to cycle through channels 1 to 6.
• The green LED segments around the channel selector will illuminate to indicate the currently selected channel.
• Channel 6 (master channel) is typically indicated by all segments lighting up or a distinct pattern.

5.2 Ipilẹ Iṣakoso

Once a channel is selected and paired, you can control the connected device:

• Tẹ awọn Bọtini Up to move the device upwards (e.g., open a shutter).
• Tẹ awọn Bọtini isalẹ to move the device downwards (e.g., close a shutter).
• Tẹ awọn Stop/Program Button to halt any ongoing movement.

5.3 Unidirectional and Bidirectional Functionality

The VarioTel 2 supports both unidirectional and bidirectional communication, depending on the paired receiver and system configuration.

• Unidirectional: The transmitter sends commands to the receiver without receiving feedback. This is standard operation for basic control.
• Itọkasi meji: With compatible bidirectional receivers, the transmitter can send commands and also receive status feedback (e.g., current position of a shutter). Consult your receiver's manual for specific bidirectional features and setup.

6. Itọju

6.1 Ninu

Wipe the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing.

6.2 Batiri Rirọpo

When the battery level is low, the status LED on the transmitter may flash or behave erratically. Replace the battery(ies) as described in Section 4.1. Always use new batteries of the specified type.

7. Laasigbotitusita

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information, technical support, or spare parts inquiries, please contact your Elero dealer or visit the official Elero webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Note: Information regarding spare parts availability was not provided in the product details.