1. Ifihan
This manual provides essential information for the proper installation, operation, and maintenance of your AXA Blueline 80 Rear Light. Please read this manual thoroughly before using the product to ensure safe and efficient operation. The Blueline Steady is designed to fit lighter and slimmer looking bikes perfectly, offering reliable rear illumination.
2. Alaye Aabo
- Nigbagbogbo rii daju pe ina ti gbe ni aabo ṣaaju gigun.
- Máa ṣàyẹ̀wò ìmọ́lẹ̀ déédéé fún ìbàjẹ́ tàbí àwọn asopọ̀ tí ó bàjẹ́.
- Do not attempt to disassemble the light housing, as this may void the warranty and compromise water resistance.
- Ensure the light is clean and free from obstructions to maintain optimal visibility.
- A ṣe àgbékalẹ̀ iná yìí fún lílo kẹ̀kẹ́ nìkan.
3. Package Awọn akoonu
Jẹrisi pe gbogbo awọn paati wa ninu package:
- AXA Blueline 80 Rear Light (1 unit)
- Mounting hardware (if applicable, typically integrated with luggage rack mount)
4. Eto ati fifi sori
The AXA Blueline 80 Rear Light is designed for mounting on a bicycle's luggage rack and is dynamo-powered. Ensure your bicycle has a compatible dynamo system (hub or side dynamo).
4.1 Mounting the Rear Light
- Identify the mounting points on your bicycle's luggage rack. The Blueline 80 typically uses an 80mm bolt spacing for mounting.
- Align the light with the mounting holes on the luggage rack.
- Secure the light using appropriate screws and nuts (not always included, may use existing rack hardware). Ensure the light is firmly attached and does not wobble.
Aworan: Apa view of the AXA Blueline 80 Rear Light securely mounted on a bicycle's luggage rack, demonstrating its slim profile and integration.
Aworan: Ẹyin view of the AXA Blueline 80 Rear Light installed on a bicycle, highlighting the integrated reflector and the light's position for optimal visibility.
4.2 Electrical Connection (Dynamo)
The Blueline 80 is dynamo-powered. Connect the light to your bicycle's dynamo system:
- Locate the power input terminals on the rear light, typically at the bottom. These are usually marked with '+' and '-' or similar indicators.
- Connect the positive wire from your dynamo to the '+' terminal of the light.
- Connect the negative (ground) wire from your dynamo to the '-' terminal of the light.
- Rí i dájú pé gbogbo àwọn ìsopọ̀ wà ní ààbò àti ààbò kúrò lọ́wọ́ ọrinrin.
Aworan: Iwaju view of the AXA Blueline 80 Rear Light, illustrating its design and the integrated reflector for passive safety.
5. Awọn ilana Iṣiṣẹ
The AXA Blueline 80 Rear Light operates automatically once connected to a functioning dynamo system.
5.1 Iṣiṣẹ Aifọwọyi
- The light features an automatic light/dark sensor. It will activate automatically when ambient light levels are low and the bicycle is in motion (generating power from the dynamo).
- The light includes a 'Steady' function, which keeps the light illuminated for approximately 4 minutes when the bicycle is standing still, providing continued visibility at stops.
Image: The AXA Blueline 80 Rear Light in operation, demonstrating its bright red LED illumination for enhanced visibility.
6. Itọju
The AXA Blueline 80 Rear Light is designed for low maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Ninu: Wipe the light's surface with a soft, damp aṣọ láti mú ẹrẹ̀ àti èérí kúrò. Yẹra fún àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
- Igbesi aye LED: The high-power LED light has a lifespan of more than 50,000 hours, meaning replacement is generally not required under normal use.
- Omi Resistance: The light is water-resistant (IP65 rated). While it can withstand splashes and rain, avoid submerging it in water.
- Awọn isopọ: Periodically check the electrical connections to the dynamo to ensure they remain secure and free from corrosion.
7. Laasigbotitusita
If you experience issues with your AXA Blueline 80 Rear Light, consult the following table:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | No power from dynamo; loose electrical connection; ambient light too high. | Ensure bicycle is in motion; check dynamo function; verify all electrical connections are secure; test in darker conditions. |
| Imọlẹ jẹ baibai tabi flickers. | Insufficient power from dynamo; poor electrical connection; dirt on light surface. | Ensure consistent speed for dynamo; check and clean electrical contacts; clean the light's lens. |
| Light does not stay on when stopped. | Issue with the 'Steady' function capacitor or circuit. | If the issue persists after checking power, contact customer support. |
8. Awọn pato
Key technical specifications for the AXA Blueline 80 Rear Light:
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | Blueline 80 |
| Nọmba apakan | LAA030 |
| Àwọ̀ | Pupa |
| Ohun elo | Ṣiṣu |
| Orisun agbara | Dynamo Powered (Hub and Side Dynamo compatible) |
| Imọlẹ | 50 Lux (front light equivalent, for rear light this refers to intensity) |
| Omi Resistance Ipele | Alatako omi (IP65) |
| Iwọn Nkan | 60 giramu |
| Awọn iwọn Ọja (LxWxH) | 3.94" x 1.18" x 1.18" (10cm x 3cm x 3cm) |
| Iṣagbesori Iru | Luggage Rack Mount (80mm bolt spacing) |
| Pataki Awọn ẹya ara ẹrọ | Steady light (4 minutes when standing still), Automatic light/dark sensor, Integrated retro reflector |
| LED Lifespan | Diẹ sii ju wakati 50,000 lọ |
9. Atilẹyin ọja ati Support
9.1 atilẹyin ọja Alaye
The AXA Blueline 80 Rear Light comes with a 2-odun olupese ká atilẹyin ọjaÀtìlẹ́yìn yìí bo àwọn àbùkù nínú àwọn ohun èlò àti iṣẹ́ ọwọ́ lábẹ́ lílò déédéé. Kò bo ìbàjẹ́ tí ó jẹyọ láti inú ìlòkulò, jàǹbá, àtúnṣe tí a kò fún ní àṣẹ, tàbí ìbàjẹ́ déédé. Jọ̀wọ́ pa ẹ̀rí ríra rẹ mọ́ fún àwọn ẹ̀tọ́ àtìlẹ́yìn.
9.2 Onibara Support
For technical assistance, warranty claims, or further inquiries, please contact your retailer or the official AXA customer support channels. Refer to the AXA webojula fun awọn julọ soke-si-ọjọ alaye olubasọrọ.
