Lithonia Lighting 18-Inch LED Motion Sensor Flush Mount Closet Light

Ọja Pariview

The Lithonia Lighting FMMCL 18 840 PIR M4 is an 18-inch LED flush mount closet light designed for general lighting in various indoor spaces. This fixture features a built-in passive infrared (PIR) motion sensor for automatic operation and a prismatic acrylic lens. It is an energy-efficient, hardwired solution suitable for damp awọn ipo.

• Sensọ išipopada: Integrated passive infrared (PIR) sensor automatically turns the light on and off based on motion detection.
• Bright & Energy-Efficient LED: Produces 925 lumens of 4000K bright white light with a 50,000-hour LED lifespan.
• Apẹrẹ ti o tọ: Low-profile form with a white acrylic diffuser engineered to resist yellowing.
• Ohun elo to pọ: Ideal for closets, pantries, utility rooms, bedrooms, and bathrooms.
• Damp Ti won won: UL ti a ṣe akojọ fun damp locations and closet storage spaces per NEC requirements.

Image: The Lithonia Lighting 18-inch LED Motion Sensor Flush Mount Closet Light.

Alaye Aabo

Before proceeding with installation or operation, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Aabo Itanna: Always disconnect power at the circuit breaker before installing or servicing the fixture. Ensure proper grounding.
• Onise itanna to peye: Ti o ko ba ni idaniloju nipa eyikeyi apakan ti ilana fifi sori ẹrọ, kan si onisẹ ina mọnamọna ti o peye.
• Damp Awọn ibi: Ẹrọ yii dara fun damp locations. Do not install in areas where it will be directly exposed to water.
• Ti kii ṣe Dimmable: This LED fixture is designed for use with non-dimmable switches only. Do not connect to a dimmer switch.
• Awọn koodu agbegbe: Rí i dájú pé gbogbo wáyà àti fífi sori ẹrọ ni ibamu pẹlu awọn koodu ina agbegbe ati ti orilẹ-ede.

Eto ati fifi sori

This fixture is designed for easy installation on walls or ceilings and is compatible with standard junction boxes (round, octagon, and horizontal rectangle).

1. Mura fun fifi sori:
   • Pa agbara ni ẹrọ fifọ Circuit ṣaaju ki o to bẹrẹ fifi sori ẹrọ.
   • Unpack the fixture and ensure all components are present: LED light fixture, mounting bracket, wire nuts, and screws.
2. So akọmọ iṣagbesori:
   • Secure the provided mounting bracket to your standard junction box using the included screws. Ensure the bracket is firmly attached.
   

   Image: Mounting bracket and wire nuts included for installation.

3. Fi okun waya:
   • Connect the fixture's wires to the corresponding house wires using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
   • Rii daju pe gbogbo awọn asopọ wa ni aabo.
4. Gbe Imuduro:
   • Align the fixture with the mounting bracket and secure it in place using the appropriate screws.

   Video: Unboxing and installation overview of the Lithonia Lighting LED Closet Light. This video demonstrates the components and basic steps for hardwired installation.

5. Pada Agbara pada:
   • Ni kete ti imuduro ti wa ni fifi sori ẹrọ ni aabo ati ti firanṣẹ, mu agbara pada si fifọ Circuit.

Awọn ilana Iṣiṣẹ

The Lithonia Lighting LED Flush Mount Closet Light features a passive infrared (PIR) motion sensor for automatic operation.

• Ṣiṣẹ Aifọwọyi: The light will automatically turn on when motion is detected within its sensing range.
• Imukuro aladaaṣe: The light will turn off approximately 30 seconds after no motion is detected.
• Ibi sensọ: For optimal performance, ensure the motion sensor is not obstructed and is positioned to detect movement in the desired area.

Image: The motion sensor light installed in a closet, demonstrating its intended use.

Itoju

This LED fixture requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

• Ninu:
  • Rii daju pe agbara wa ni pipa ṣaaju ṣiṣe mimọ.
  • Mu imuduro rẹ nu pẹlu rirọ, gbẹ, tabi die-die damp asọ. Ma ṣe lo abrasive ose tabi epo.
  • Keep the motion sensor lens clean and free from dust or obstructions for proper operation.
• Ko si Awọn apakan Iṣẹ Olumulo: The LED components are integrated and not user-replaceable. Do not attempt to open or modify the fixture.

Laasigbotitusita

If you experience issues with your Lithonia Lighting LED Motion Sensor Closet Light, refer to the following common troubleshooting steps:

Awọn pato

Detailed technical specifications for the FMMCL 18 840 PIR M4 model:

• Nọmba awoṣe: FMMCL 18 840 PIR M4
• Agbara: 14 Wattis
• Iṣagbewọle Voltage: 120V, 60Hz
• Flux Imọlẹ: 925 Lumens
• Emitting Color (Color Temperature): 4000K (funfun didan)
• Ti o le ṣe dimmable: NO (Non-dimmable switches only)
• Orisun Imọlẹ: LED
• Atọka Rendering Awọ (CRI): 85
• Awọn iwọn (L x H x D): 17.75 inches x 3.25 inches x 1.38 inches
• Ìwúwo: 1 lb
• Itọsọna Imọlẹ: Gbogboogbo
• Apapọ Igbesi aye: wakati meji 50,000
• Awọn iwe-ẹri: cUL Certified (US and Canada), ENERGY STAR certified, suitable for damp awọn ipo.

Image: Product dimensions and certifications.

Image: Detailed specification sheet for the LED Closet Light series.

Atilẹyin ọja

This Lithonia Lighting LED Flush Mount Closet Light is covered by a 5-odun lopin atilẹyin ọja. This warranty covers defects in materials and workmanship under normal use and service. For full warranty details and claims, please refer to the official product documentation or contact customer support.

Onibara Support

For technical assistance, warranty claims, or any questions regarding your Lithonia Lighting product, please contact customer support:

• Webojula: Visit the official Lithonia Lighting webaaye fun awọn orisun atilẹyin ati alaye olubasọrọ.
• Foonu: Tọkasi apoti ọja tabi osise webAaye fun julọ lọwọlọwọ onibara iṣẹ nọmba foonu.