DIMPLEX LC2005W31 500W 20-Inch White Baseboard Heater Instruction Manual

1. Alaye Aabo pataki

Read all instructions carefully before installing or using this baseboard heater. Failure to follow these instructions may result in fire, electric shock, or personal injury. Keep this manual for future reference.

• Ewu ti Ina: Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater.
• Ewu ti Ina mọnamọna: Do not use this heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water. Never immerse the heater in water.
• Igbóná púpọ̀: To prevent possible fire, do not block air intakes or exhaust openings. Do not insert or allow foreign objects to enter any ventilation or exhaust opening.
• Awọn oju gbigbona: This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles if provided when moving this heater.
• Children and Invalids: Išọra to gaju jẹ dandan nigbati ẹrọ igbona eyikeyi ba nlo nipasẹ tabi sunmọ awọn ọmọde tabi awọn alaiṣe ati nigbakugba ti ẹrọ igbona ba ṣiṣẹ ati laini abojuto.
• Ibi ti ina elekitiriki ti nwa: Always unplug the heater when not in use. Connect to properly grounded outlets only. Ensure the heater is connected to a 240V electrical supply as specified.
• Damaged Units: Ma ṣe ṣisẹ ẹrọ igbona eyikeyi pẹlu okun tabi plug ti o bajẹ, tabi lẹhin ti ẹrọ igbona ti bajẹ, ti lọ silẹ, tabi bajẹ ni eyikeyi ọna.
• Isakoso okun: Do not run the power cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange the cord away from traffic areas to prevent tripping.

2. Ọja Ipariview

The DIMPLEX LC2005W31 is a compact and efficient 500W, 240V baseboard heater designed for indoor use. Its white finish and streamlined design integrate well into various room aesthetics. This model is engineered for quick heat distribution and consistent room temperature control.

Aworan 2.1: Iwaju view of the DIMPLEX LC2005W31 500W 20-inch white baseboard heater.

Awọn ẹya pataki:

• Apẹrẹ Iwapọ: Approximately 42% shorter than traditional baseboard heaters, making it suitable for smaller spaces.
• Imudara Alapapo: Delivers heat approximately 40% faster than conventional models, responding quickly to temperature changes.
• Iwọn otutu ti o wa ni ibamu: Designed to maintain a stable and comfortable room temperature.
• Ipari ti o tọ: Features a specially formulated epoxy/polyester powder coating that is environmentally friendly, resists fading, and abrasion.
• Ifọwọsi aabo: CSA certified with full-length automatic overheat reset for enhanced safety.

3. Awọn pato

Aworan 3.1: Diagram showing the dimensions of the DIMPLEX LC2005W31 baseboard heater.

4. Fifi sori (Eto)

Proper installation is crucial for the safe and efficient operation of your DIMPLEX baseboard heater. This unit is designed for permanent installation and requires a dedicated 240V electrical circuit.

4.1 Awọn sọwedowo fifi sori ẹrọ tẹlẹ:

• Ipese Itanna: Ensure a 240V electrical supply is available at the installation location. Consult a qualified electrician if unsure.
• Ibi: Choose a location on an interior wall, away from curtains, furniture, and other combustible materials. Maintain at least 3 feet (0.9 meters) clearance from the front of the heater.
• Iyọkuro: Ensure adequate clearance above and below the heater for proper airflow.
• Awọn irinṣẹ ti a beere: You will need basic electrical tools, a screwdriver, and possibly a drill for mounting.

4.2 Awọn ilana iṣagbesori:

1. Remove End Caps: The heater features easily removable end caps for access during installation. Carefully detach them.
2. Agbona ipo: Place the heater against the wall in the desired location. The unit has pre-stamped mounting holes for secure attachment.
3. Ni aabo si Odi: Use appropriate fasteners (not included) to secure the heater to the wall through the pre-stamped mounting holes. Ensure the heater is level and firmly attached.

4.3 Asopọmọra Itanna:

This heater is designed to be hardwired into your electrical system. It can be connected to a wall unit thermostat or have a thermostat installed on either end of the baseboard heater itself.

1. Agbara Pa: ALWAYS turn off power at the main circuit breaker before making any electrical connections.
2. Wíwọlé sí Wáyà: Utilize the knock-out sides to route electrical wiring into the heater's junction box.
3. Asopọmọra Waya: Follow the wiring diagram provided with your thermostat or the heater's internal wiring instructions. Connect the 240V supply wires to the heater terminals. Ensure all connections are secure and comply with local electrical codes.
4. Install Thermostat (if applicable): If installing a thermostat directly on the heater, follow the thermostat manufacturer's instructions for proper connection to the heater's internal wiring.
5. Replace End Caps: Once wiring is complete and secured, replace the end caps.

Akiyesi: All electrical work should be performed by a qualified electrician in accordance with all national and local electrical codes.

Aworan 4.1: Apa view of the DIMPLEX LC2005W31 baseboard heater, showing its compact profile àti àwọn ojú ìfìdíkalẹ̀ tó ṣeé ṣe.

5. Isẹ

Once properly installed and connected to power, operating your DIMPLEX baseboard heater is straightforward.

5.1 Initial Startup:

1. Pada Agbara pada: Turn on the power at the main circuit breaker.
2. Eto iwọn otutu: If using an external or integrated thermostat, set it to the desired temperature. The heater will begin to warm up.
3. Òórùn Àkọ́kọ́: It is normal for a slight odor to be present during the first few hours of operation as manufacturing residues burn off. Ensure adequate ventilation during this period.

5.2 Iṣe deede:

• The heater will cycle on and off as needed to maintain the set temperature.
• The automatic overheat reset feature will temporarily shut off the heater if it detects an unsafe operating temperature. The heater will resume operation once it cools down.

6. Itọju

Regular maintenance ensures the longevity and efficient performance of your heater.

6.1 Ninu:

1. Ge Agbara: ALWAYS turn off power at the main circuit breaker and allow the heater to cool completely before cleaning.
2. Ode Ninu: Mu ese ita gbangba pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
3. Ninu inu: Periodically, use a vacuum cleaner with a brush attachment to remove dust and lint from the grilles and interior components. Ensure no foreign objects are left inside.

6.2 Ibi ipamọ:

Ti o ba tọju ẹrọ igbona fun igba pipẹ, rii daju pe o mọ ati gbẹ. Tọju si ni itura, ibi gbigbẹ, ni pataki ninu apoti atilẹba rẹ.

7. Laasigbotitusita

If your DIMPLEX baseboard heater is not operating correctly, consult the following troubleshooting guide before contacting customer support.

If the problem persists after attempting these solutions, disconnect power to the heater and contact DIMPLEX customer support or a qualified electrician.

8. atilẹyin ọja Information

DIMPLEX NORTH AMERICA LTD provides the following warranty for the LC2005W31 baseboard heater:

• Elegbona: 10-odun atilẹyin ọja.
• Gbogbo Ẹka: Atilẹyin ọja ọdun mẹta lori gbogbo awọn ẹya miiran.

This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the DIMPLEX webojula.

9. Atilẹyin ati Olubasọrọ

For technical assistance, replacement parts, or further inquiries regarding your DIMPLEX LC2005W31 baseboard heater, please contact DIMPLEX customer support.

• Olupese: DIMPLEX NORTH AMERICA LTD
• Webojula: Refer to the official DIMPLEX webaaye fun awọn orisun atilẹyin ati alaye olubasọrọ.
• Iranlọwọ Ọjọgbọn: For electrical installation or complex issues, it is recommended to consult a qualified and licensed electrician.