Ọrọ Iṣaaju
This manual provides comprehensive instructions for the Hellberg Safety 42003-001 Secure 3 Helmet Mount Hearing Protection. It covers product features, setup, operation, maintenance, and troubleshooting to ensure safe and effective use of your hearing protection.
The Hellberg Secure 3 earmuffs are designed for helmet mounting, offering robust hearing protection in high to very high noise environments. Their durable construction and slim profile are engineered for demanding work conditions.
Ọja Pariview
Figure 1: Hellberg Secure 3 Helmet Mount Hearing Protection (front view).
This image displays the Hellberg Secure 3 earmuffs, highlighting their black and orange design and the helmet attachment mechanism.
- Level 3 Hearing Protection: Suitable for high to very high noise levels, specifically between 100-115 dB. Effective against low-frequency noise that can cause stress and mask speech.
- Helmet Mounted Design: Features attachment arms with a durable steel spring mechanism, tested for over 10,000 oscillations, ensuring longevity. Designed with no exposed metal parts for non-conductivity.
- Three Wearing Positions: Allows for parking the protector on the rear of the helmet when not in use, a stand-by position slightly off the ears, and a working position covering the ears.
- Ibamu ibori: Approved for use with over 45 popular safety helmet models. Always verify compatibility before combining personal protective equipment.
- Replaceable Cushions: Equipped with comfortable cushions featuring a "snap-in" system for easy replacement, promoting hygiene and maintaining performance. Cushions have minimal sweat retention and soft foam filling.
Awọn ilana iṣeto
Proper attachment of the hearing protection to your helmet is crucial for effective noise reduction and comfort.
- Verify Helmet Compatibility: Before attachment, ensure your safety helmet is among the models approved for use with Hellberg helmet-mounted hearing protectors. Refer to Hellberg's official compatibility list or your helmet manufacturer's guidelines.
- Locate Attachment Slots: Identify the accessory slots on the sides of your safety helmet. These are typically standard slots designed for various helmet-mounted accessories.
- Attach Earmuffs: Align the attachment arms of the Hellberg Secure 3 earmuffs with the helmet's accessory slots. Push firmly until you hear or feel a click, indicating the earmuffs are securely locked into place. Ensure both sides are equally secured.
- Ààbò ìdánwò: Gently pull on the earmuffs to confirm they are firmly attached and do not easily detach from the helmet.
Figure 2: Hellberg Secure 3 Helmet Mount Hearing Protection attached to a safety helmet.
This image demonstrates the Hellberg Secure 3 earmuffs correctly mounted on a white safety helmet, showing the integrated design.
Awọn ilana Iṣiṣẹ
The Hellberg Secure 3 offers three distinct wearing positions for optimal flexibility during your work day.
- Ipo Ṣiṣẹ: To activate hearing protection, push the earmuffs inwards until they fully cover your ears. Ensure a snug fit around your ears to achieve the stated 27 dB NRR (Noise Reduction Rating). This position is for active noise exposure.
- Stand-by Position: When temporary communication or a brief break from full protection is needed, gently pull the earmuffs slightly off your ears. They will remain close to your head but not fully sealed, allowing for improved situational awareness while still offering some attenuation.
- Parked Position: For extended periods when hearing protection is not required, or for storage, pivot the earmuffs to the rear of your helmet. This keeps them out of the way and protected from damage.
Always ensure the earmuffs are in the full working position when exposed to noise levels between 100-115 dB or higher, especially in environments dominated by low frequencies.
Itoju
Regular maintenance ensures the longevity and effectiveness of your Hellberg Secure 3 hearing protection.
- Ninu: Clean the exterior of the earmuffs and cushions regularly with a mild soap and water solution. Wipe dry with a clean cloth. Do not immerse the earmuffs in water.
- Rirọpo timutimu: The ear cushions are designed with a "snap-in" system for easy replacement. Replace cushions periodically (e.g., every 6 months or as needed based on wear and tear) to maintain hygiene and acoustic seal. To replace, gently pull off the old cushion, align the new cushion, and press firmly until it snaps into place.
- Ayewo: Before each use, inspect the earmuffs for any signs of damage, such as cracks in the cups, worn or hardened cushions, or damaged attachment arms. Do not use if damaged.
- Ibi ipamọ: Store the hearing protection in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
Laasigbotitusita
If you experience issues with your Hellberg Secure 3 hearing protection, consider the following common solutions:
- Inadequate Noise Reduction:
- Ensure the earmuffs are fully covering your ears and creating a tight seal. Adjust their position if necessary.
- Check the ear cushions for wear, hardening, or damage. Worn cushions can compromise the seal. Replace them if needed.
- Verify that the earmuffs are securely attached to the helmet and not loose.
- Ibanujẹ lakoko Lilo:
- Ensure the helmet and earmuffs are properly adjusted for your head size and shape.
- Check the ear cushions for proper seating and ensure they are not twisted or creased.
- If discomfort persists, take short breaks from wearing the protection.
- Earmuffs Not Staying in Position:
- Inspect the helmet attachment arms for damage or excessive wear.
- Ensure the earmuffs are correctly snapped into the helmet's accessory slots.
If problems persist after attempting these solutions, contact Hellberg Safety customer support for further assistance.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | 42003-001 |
| Brand | Hellberg |
| Iwọn Idinku Ariwo (NRR) | 27 dB |
| Ipele Idaabobo | Level 3 (for 100-115 dB noise levels) |
| Iṣagbesori Iru | Àṣíborí |
| Àwọ̀ | Red (with black) |
| Ohun elo | Metal (attachment arms) |
| Iwọn Nkan | 10.6 iwon |
| Ọja Mefa | 4.33 x 5.51 x 6.3 inches |
| Olupese | Aabo Industrial Products |
Atilẹyin ọja & Atilẹyin
Specific warranty details for the Hellberg Safety 42003-001 Secure 3 Helmet Mount Hearing Protection are typically provided with the product packaging or available on the manufacturer's official website. Please refer to these sources for the most accurate and up-to-date warranty information.
For technical support, product inquiries, or assistance with troubleshooting beyond the scope of this manual, please contact Hellberg Safety customer service or the manufacturer, Protective Industrial Products. Contact information can usually be found on the product packaging or their official webojula.
It is recommended to register your product, if applicable, to receive updates and facilitate warranty claims.
