Ọrọ Iṣaaju
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Blue Bird 65134 Trimmer with Kawasaki TJ53E engine. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

Figure 1: Blue Bird 65134 Trimmer. This image displays the complete assembly of the gas-powered trimmer, featuring its robust red engine unit, the long shaft, and the red protective guard over the cutting head.
Awọn Itọsọna Aabo
Always prioritize safety when operating power tools. Adhere to the following guidelines:
- Wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, gloves, and sturdy footwear.
- Ensure the work area is clear of bystanders, pets, and debris.
- Do not operate the trimmer in wet conditions or near flammable materials.
- Inspect the trimmer for any damage or loose parts before each use.
- Familiarize yourself with the controls and emergency shut-off procedures.
Ṣeto
Apejọ
The Blue Bird 65134 Trimmer may require some assembly out of the box. Follow these steps:
- Carefully unpack all components and verify against the packing list.
- Attach the handle to the shaft, ensuring it is securely fastened at a comfortable operating position.
- Mount the safety guard over the cutting head, ensuring it is firmly in place to protect against debris.
- Connect the cutting head (trimmer line or blade) according to the specific instructions provided with the cutting attachment.
- Ensure all bolts and fasteners are tightened before use.
Idana Adalu
This gas-powered trimmer requires a specific fuel mixture. Refer to the Kawasaki TJ53E engine manual for the exact fuel-to-oil ratio. Typically, a 2-stroke engine requires a mixture of unleaded gasoline and high-quality 2-stroke engine oil. Mix the fuel in a separate, approved container before adding it to the trimmer's fuel tank.
Awọn ilana Iṣiṣẹ
Bibẹrẹ ẹrọ naa
- Gbé ohun èlò ìtọ́jú náà sí orí ilẹ̀ tí ó tẹ́jú, tí ó sì dúró ṣinṣin.
- Rí i dájú pé sáyà iná náà wà ní ipò "ON".
- Engage the choke (if cold starting).
- Tẹ boolubu alakoko ni igba pupọ titi ti epo yoo fi han.
- Pull the starter cord firmly and smoothly until the engine fires.
- Nígbà tí ẹ́ńjìnnì bá ti bẹ̀rẹ̀, dín ìdènà náà kù díẹ̀díẹ̀.
- Gba engine laaye lati gbona fun awọn iṣẹju diẹ ṣaaju ki o to kopa ninu fifa.
Isẹ gige
Hold the trimmer firmly with both hands. Maintain a balanced stance. Use a sweeping motion to cut grass and weeds. Avoid hitting hard objects like rocks, fences, or concrete, as this can damage the cutting head or cause kickback.
Itoju
Itọju deede ṣe idaniloju igbesi aye gigun ati iṣẹ to dara julọ ti trimmer rẹ.
- Asẹ afẹfẹ: Nu àlẹ̀mọ́ afẹ́fẹ́ déédéé, pàápàá jùlọ ní ibi tí eruku bá wà. Rọpò rẹ̀ tí ó bá bàjẹ́.
- Sipaki plug: Ayewo ki o si nu awọn sipaki plug lorekore. Rọpo ti o ba wọ tabi ti bajẹ.
- Ajọ epo: Check and replace the fuel filter as needed to prevent fuel system issues.
- Lubrication Gearbox: Ensure the gearbox is adequately lubricated. Refer to the engine manual for recommended lubricant type and frequency.
- Ori Gígé: Inspect the trimmer line or blade for wear and replace as necessary.
- Isọsọ gbogboogbo: Keep the trimmer clean from grass clippings and debris.
Ibi ipamọ
Before storing the trimmer for an extended period, drain the fuel tank or use a fuel stabilizer. Clean the unit thoroughly and store it in a dry, secure location away from direct sunlight and extreme temperatures.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Enjini ko bẹrẹ | No fuel, clogged fuel filter, fouled spark plug, ignition switch OFF, incorrect choke setting. | Check fuel level, clean/replace fuel filter, clean/replace spark plug, turn ignition ON, adjust choke. |
| Engine nṣiṣẹ ibi | Dirty air filter, incorrect fuel mixture, worn spark plug, carburetor issues. | Clean air filter, use correct fuel mixture, replace spark plug, consult service professional for carburetor. |
| Gbigbọn ti o pọju | Damaged cutting head, loose components. | Inspect and replace cutting head if damaged, tighten all fasteners. |
Awọn pato
| Brand | Bluebird |
| Nọmba awoṣe | 65134 |
| Engine Iru | Kawasaki TJ53E (Gas-powered) |
| Agbara to pọju | 1.5 kW (7000 rpm) |
| Ohun elo fireemu | Painted and enameled steel |
| Àwọ̀ | Buluu |
| Iwọn Nkan | 10.5 kilo |
| Package Mefa | 190 x 33 x 29 cm |
Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the documentation included with your purchase or contact Bluebird customer service. Keep your proof of purchase for warranty claims.
Akiyesi: Awọn ofin atilẹyin ọja le yatọ nipasẹ agbegbe ati alagbata.





