Einhell TC-CD 18-2 Li Cordless Drill Instruction Manual

1. Ifihan ati Ọja Loriview

The Einhell TC-CD 18-2 Li is a versatile cordless drill/screwdriver designed for a wide range of drilling and screwdriving applications in domestic, workshop, and garage environments. This tool offers convenience and efficiency without the need for a power cord.

Awọn ẹya pataki pẹlu:

• Ergonomic design with a soft grip for comfortable handling.
• 2-speed gearbox for powerful screwdriving and efficient drilling.
• Automatic spindle lock for quick and easy bit changes.
• Integrated bright LED light to illuminate the work area.
• Supplied with two 18V Lithium-Ion batteries, a charger, and a robust carrying case.

Figure 1: Einhell TC-CD 18-2 Li Cordless Drill with battery installed.

2. Awọn ilana aabo

Always observe the following safety precautions when operating the cordless drill/screwdriver to prevent electric shock, injury, and fire.

Gbogbogbo Power Ọpa Aabo ikilo

• Aabo Agbegbe Iṣẹ: Jeki agbegbe iṣẹ rẹ mọ ki o si tan daradara. Awọn agbegbe idamu tabi awọn agbegbe dudu n pe awọn ijamba. Ma ṣe ṣiṣẹ awọn irinṣẹ agbara ni awọn bugbamu bugbamu, gẹgẹbi niwaju awọn olomi ina, gaasi, tabi eruku.
• Aabo Itanna: Yago fun olubasọrọ ara pẹlu ilẹ tabi ilẹ roboto bi paipu, imooru, awọn sakani, ati firiji. Ewu ti o pọ si ti mọnamọna ina mọnamọna ti ara rẹ ba wa ni ilẹ tabi ti ilẹ.
• Aabo ti ara ẹni: Always wear eye protection. Use safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection when appropriate. Dress properly; do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Lilo ati Itọju: Má ṣe fipá mú ohun èlò agbára náà. Lo ohun èlò agbára tó tọ́ fún ohun èlò rẹ. Má ṣe lo ohun èlò agbára náà tí ìyípadà náà kò bá tan tàbí pa á. Yọ batiri náà kúrò lára ​​ohun èlò agbára náà kí o tó ṣe àtúnṣe, yí àwọn ohun èlò mìíràn padà, tàbí kí o fi àwọn ohun èlò agbára pamọ́.
• Lilo ati Itọju Ohun elo Batiri: Gba agbara nikan pẹlu ṣaja pato nipasẹ olupese. Lo awọn irinṣẹ agbara nikan pẹlu awọn idii batiri ti a pinnu pataki. Nigbati idii batiri ko ba si ni lilo, pa a mọ si awọn ohun elo irin miiran.
• Iṣẹ: Jẹ ki ohun elo agbara rẹ ṣe iṣẹ nipasẹ eniyan atunṣe ti o peye nipa lilo awọn ẹya ara rirọpo kanna nikan. Eyi yoo rii daju pe aabo ti ọpa agbara ti wa ni itọju.

3. Ọja irinše

Familiarize yourself with the parts of your Einhell TC-CD 18-2 Li cordless drill/screwdriver.

1. Keyless Chuck
2. Oruka Eto Torque
3. Gear Selector Switch (2-speed)
4. Siwaju / Yiyi Yiyi pada
5. Trigger Switch (with electronic speed control)
6. Soft dimu Mu
7. Imọlẹ Ise LED
8. Batiri Pack
9. Ṣaja batiri

Figure 2: Two 18V Lithium-Ion batteries and charger.

Figure 3: Ergonomic soft grip handle for comfortable operation.

4. Eto

4.1 Ngba agbara si Batiri naa

Before first use, fully charge the battery pack. Connect the charger to a suitable power outlet. Insert the battery pack into the charger. The charging indicator lights on the charger will show the charging status. Once fully charged, disconnect the battery from the charger.

Figure 4: Typical charging time for a 1.5 Ah battery is 3-5 hours.

4.2 Fifi ati Yọ Pack Batiri kuro

• Fifi sori: Slide the charged battery pack into the base of the drill until it clicks securely into place.
• Yiyọ: Press the release button on the battery pack and slide it out from the drill.

4.3 Installing and Removing Drill/Screwdriver Bits

The drill features a keyless chuck for easy bit changes.

• Fifi sori: Rotate the chuck counter-clockwise until the jaws are open wide enough to insert the bit. Insert the bit fully and then rotate the chuck clockwise to tighten it securely. The automatic spindle lock assists in this process.
• Yiyọ: Yi awọn Chuck ni counter-clockwisi lati tú awọn ẹrẹkẹ ki o si yọ awọn bit.

5. Awọn ilana Iṣiṣẹ

5.1 Yiyan Iyara

The drill has a 2-speed gearbox. Use the gear selector switch on top of the drill to choose between:

• Jia 1 (Iyara Kekere, Yiyi Gaju): Apẹrẹ fun skrudriving ati lilu awọn iwọn ila opin nla.
• Jia 2 (Iyara giga, Yiyi Kekere): Suitable for drilling small diameters and faster work.

Figure 5: The drill features a 2-speed gearbox.

5.2 Ètò Ìyípo

The torque setting ring allows you to adjust the amount of torque applied before the clutch disengages. This prevents overtightening screws or damaging the workpiece.

• Select a lower setting for smaller screws and softer materials.
• Select a higher setting for larger screws and harder materials.
• For drilling, set the ring to the drill symbol for maximum torque.

Figure 6: The drill provides up to 38 Nm of torque.

5.3 Siwaju / Yiyi pada

The forward/reverse switch located above the trigger controls the direction of rotation. Push the switch to the left for forward rotation (screwing in/drilling) and to the right for reverse rotation (unscrewing).

5.4 Trigger Switch and LED Work Light

Press the trigger switch to start the drill. The electronic speed control allows you to vary the speed by applying more or less pressure to the trigger. The integrated LED work light automatically illuminates the work area when the trigger is pressed, improving visibility in dimly lit spaces.

Figure 7: Electronic speed control for precise operation.

6. Itọju

6.1 Ninu

Keep the ventilation slots of the drill clean to prevent overheating. Wipe the tool housing with a soft, damp cloth. Do not use abrasive cleaners or solvents. Regularly clean the chuck jaws to ensure proper gripping of bits.

6.2 Itọju Batiri ati Ibi ipamọ

• Tọju awọn batiri ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Do not store fully discharged batteries for extended periods. Charge them periodically.
• If the battery pack is not used for a long time, recharge it every 3-6 months.

6.3 Gbogbogbo ayewo

Periodically inspect the tool for any signs of damage, loose screws, or worn parts. If any damage is found, have the tool repaired by a qualified service technician before further use.

7. Laasigbotitusita

8. Awọn pato

Figure 8: The product includes two 18V Lithium-Ion batteries.

9. Atilẹyin ọja ati Support

For warranty information and customer support, please refer to the official Einhell website or contact your local Einhell service center. Keep your purchase receipt as proof of purchase for any warranty claims.

Atilẹyin Ayelujara: Ṣabẹwo www.einhell.com for product registration, FAQs, and service contact details.