Ìwé Ìtọ́ni fún Fíríìjì TUC-60-HC 60-inch Tòótọ́

1. Alaye Aabo

Please read all instructions carefully before operating the appliance to ensure safe and efficient use. Retain this manual for future reference.

• Aabo Itanna: Rí i dájú pé ẹ̀rọ náà so mọ́ ihò iná mànàmáná tó ní ilẹ̀ dáadáa pẹ̀lú ìyẹ̀fun tó tọ́tage as specified on the product label. Do not use extension cords.
• Afẹfẹ: Jẹ́ kí afẹ́fẹ́ tó wà ní àyíká ẹ̀rọ náà wà ní ìsàlẹ̀ tó yẹ kí ó lè máa yọ́. Àwọn afẹ́fẹ́ tó dí lè mú kí ó gbóná jù, kí ó sì dín iṣẹ́ wọn kù.
• Ohun elo Eru: This appliance is heavy. Use appropriate lifting techniques and equipment when moving to prevent injury.
• Ninu: Disconnect power before cleaning or performing any maintenance. Use non-abrasive cleaners.
• Awọn ohun elo ina: Ma ṣe tọju awọn nkan ibẹjadi tabi awọn ohun elo ina si inu tabi nitosi firiji.

2. Ọja Ipariview

The True TUC-60-HC is a 60-inch two-section undercounter refrigerator designed for commercial use, featuring solid stainless steel doors and a robust construction for durability and performance.

Iwaju view of the True TUC-60-HC undercounter refrigerator, showcasing its stainless steel finish and two solid doors.

Awọn ẹya pataki:

• 60-inch width, two-section design
• Solid stainless steel doors
• 15.5 Cubic Feet capacity
• Aifọwọyi defrost eto
• Undercounter installation type
• Ti o tọ alagbara, irin ikole

Diagram showing the dimensions of the True TUC-60-HC refrigerator: 60.38 inches width, 30.13 inches depth, and 29.75 inches height.

3. Eto

3.1 Ṣiṣii silẹ

1. Ni ifarabalẹ yọ gbogbo awọn ohun elo apoti kuro, pẹlu teepu ati awọn fiimu aabo.
2. Ṣe àyẹ̀wò ẹ̀rọ náà fún ìbàjẹ́ èyíkéyìí nínú ọkọ̀ ojú omi náà. Fi ìròyìn fún ẹni tó ń gbé e lọ lẹ́sẹ̀kẹsẹ̀.
3. Yọ gbogbo ohun èlò ìkójọ àti àwọn ohun èlò mìíràn kúrò nínú rẹ̀.

3.2 Ibi

• Place the refrigerator on a strong, level surface capable of supporting its weight when fully loaded.
• Ensure adequate air circulation around the unit. Do not block the condenser air intake or exhaust vents.
• Avoid direct sunlight or proximity to heat-generating appliances (ovens, stoves) to maintain optimal performance.

3.3 Itanna Asopọ

• Before plugging in, ensure the power supply matches the voltage ati amperage requirements listed on the unit's serial tag.
• Plug the unit directly into a dedicated, grounded electrical outlet. Do not use adapter plugs or extension cords.

3.4 Ni ibẹrẹ Cleaning

• Before first use, clean the interior and exterior surfaces with a mild soap and water solution.
• Mu ese gbẹ pẹlu asọ asọ.

4. Awọn ilana Iṣiṣẹ

4.1 Lilo Agbara ati Iṣakoso Iwọn otutu

1. After setup, plug in the unit. The compressor will start automatically.
2. Allow the refrigerator to run for several hours (typically 2-4 hours) to reach its set temperature before loading products.
3. Temperature settings are typically adjusted via a digital controller located on the front or interior of the unit. Refer to the specific controller's instructions for detailed adjustment procedures.

4.2 Gbigbe Fifi Fìríìjì

• Distribute items evenly on the shelves to ensure proper air circulation.
• Do not overload shelves beyond their weight capacity.
• Avoid blocking the internal air vents to maintain consistent temperatures.

4.3 enu isẹ

• Ensure doors close completely after each use to maintain internal temperature and energy efficiency.
• Check door gaskets regularly for wear or damage that could compromise the seal.

5. Itọju

5.1 Deede Cleaning

• Inu inu: Clean the interior weekly with a mild, non-abrasive cleaner and warm water. Rinse thoroughly and dry.
• Òde: Wipe down stainless steel surfaces regularly with a soft cloth and a stainless steel cleaner to maintain appearance.
• Okun Condenser: The condenser coil should be cleaned monthly or quarterly, depending on the operating environment. Disconnect power, locate the coil (usually at the rear or bottom), and use a brush or vacuum cleaner to remove dust and debris. A dirty coil reduces efficiency and can lead to compressor failure.

5.2 Gasket Inspection

• Inspect door gaskets monthly for cracks, tears, or stiffness. Damaged gaskets can lead to air leaks and increased energy consumption.
• Clean gaskets with warm, soapy water to keep them pliable and ensure a good seal.

5.3 Aifọwọyi Defrost

This unit features an automatic defrost system, eliminating the need for manual defrosting. Ensure the drain pan is clear and the drain line is not obstructed to allow proper water evaporation.

6. Laasigbotitusita

Ṣaaju ki o to kan si iṣẹ, tunview Awọn iṣoro ti o wọpọ ati awọn idahun:

7. Awọn pato

8. Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official TRUE webAaye ayelujara. Awọn alaye olubasọrọ fun iṣẹ alabara wa ni igbagbogbo lori olupese webojula.