Ọrọ Iṣaaju
This manual provides detailed instructions for the installation, operation, and maintenance of your APS Running Boards Style. These running boards are designed to provide a convenient and secure step for easier entry and exit from your Ford Explorer 2011-2019 4-Door. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.
Ọja Pariview
Key Awọn ẹya ara ẹrọ
- Package includes: (2) iBoard running boards, mounting brackets and hardware kit for an easy DIY install.
- Heavy Duty 6-inch Wide Running Boards with Raised Ends that Act as Mud Guards.
- Made from Aircraft grade 6061-T6 Aluminum, the board and metal ends are welded together for seamless integration.
- Full Length and UV Resistant Grooved High Grip Tread Step Pad for Secure Footing and Anti-slip Protection.
- Easy to install Rocker Panel Mount (Drilling Required), compatible with Ford Explorer 2011-2019 4-Door.
Package Awọn akoonu
- Pair of Side Steps
- Iṣagbesori biraketi Kit
- Ilana Afowoyi (iwe yii)
Image: The APS Running Boards, showcasing their sleek design and grooved step pads.
Aworan: Alaye view of the running board highlighting its key design and material features.
Eto ati fifi sori
Installation of the APS Running Boards requires careful attention and some mechanical aptitude. Drilling is required for proper mounting. For optimal results and safety, professional installation is highly recommended.
An official Installation Manual in PDF format is available for detailed step-by-step instructions. It is strongly advised to consult this document for comprehensive guidance:
Ṣe igbasilẹ Afowoyi fifi sori ẹrọ (PDF)
Awọn Igbesẹ Fifi sori ẹrọ Gbogbogbo (Akopọ)
- Igbaradi: Unpack all components and verify against the package contents list. Familiarize yourself with all parts and the vehicle's undercarriage.
- Apejọ akọmọ: Assemble the mounting brackets according to the instructions, but do not fully tighten hardware until the running boards are aligned.
- J-Bolt Placement: Carefully insert J-bolts into the vehicle's frame openings as specified in the detailed manual. Patience is key during this step.
- Rocker Panel Access: Release necessary retainers on the rocker panel to access mounting points.
- Iṣagbesori akọmọ: Attach the assembled brackets to the vehicle's frame using the provided hardware. For the rear bracket, a pilot hole may need to be drilled after marking the precise location.
- Running Board Attachment: Secure the running boards to the mounted brackets. Adjust alignment as needed before final tightening.
- Imuduro ipari: Once satisfied with the position and alignment, securely tighten all bolts and nuts. Reattach any released retainers.
Image: APS Running Boards installed on a red Ford Explorer, demonstrating fitment.
Image: APS Running Boards installed on a white Ford Explorer, showcasing the aesthetic integration.
Awọn ilana Iṣiṣẹ
The APS Running Boards are designed for simple and intuitive use. Once properly installed, they provide a stable platform for stepping into and out of your vehicle.
- Tesiwaju Lori: Place your foot firmly on the grooved step pad. The anti-slip surface provides secure footing.
- Opin iwuwo: The running boards have a weight limit of 500 pounds. Do not exceed this limit to prevent damage to the boards or vehicle.
- Iwọle/Jade: Use the running board as a stable step to assist in entering or exiting the vehicle, reducing the step height.
Itoju
Regular maintenance will help preserve the appearance and functionality of your APS Running Boards.
- Ninu: Clean the running boards regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the polished aluminum finish or the step pad.
- Ayewo: Periodically inspect all mounting hardware for tightness. Vibrations from driving can sometimes loosen bolts over time. Retighten as necessary.
- Ifihan Ayika: In areas with road salt or harsh weather conditions, more frequent cleaning is recommended to prevent corrosion and maintain the finish.
Laasigbotitusita
This section addresses common concerns that may arise during or after installation.
- Àwọn Ìtọ́ni tí kò ṣe kedere: If the provided instructions seem unclear, refer to the official PDF manual for more detailed diagrams and steps. Consider seeking assistance from a professional installer if you are unsure about any part of the process.
- Running Boards Appear Too Low or Sag: Ensure all mounting brackets are correctly positioned and fully tightened. Verify that the installation followed the vehicle-specific guidelines. If the issue persists, professional adjustment or re-installation may be necessary.
- Corrosion/Damage from Road Salt: The running boards are made from durable aluminum, but prolonged exposure to road salt without cleaning can lead to issues. Regular rinsing and cleaning, especially after driving in salted conditions, is crucial to prevent material degradation.
Awọn pato
Image: Dimensions of the APS Running Board.
Aworan: Agbelebu-apakan view detailing the protective layers and metallic materials of the running board.
| Iwa | Iye |
|---|---|
| Brand | APS |
| Awoṣe | iBoard Running Board Style (IB-FR927A) |
| Àwọ̀ | Fadaka Aluminiomu |
| Ohun elo | Aircraft Grade 6061-T6 Aluminum |
| Ipari ode | Ipari didan |
| Awọn Iwọn Nkan (L x W x H) | 71 x 6 x 3.25 inches |
| Iwọn Nkan | 34.9 iwon |
| Iwọn Idiwọn | 500 iwon |
| Ọkọ Iṣẹ Iru | Sport Utility Vehicle (Ford Explorer 2011-2019 4-Door) |
| UPC | 637230855980 |
| Automotive Fit Iru | Ti nše ọkọ Specific Fit |
| Ọjọ Akọkọ Wa | Oṣu Kẹta Ọjọ 25, Ọdun 2016 |
Atilẹyin ọja ati Support
APS is committed to providing quality products. For specific warranty information regarding your running boards, please refer to the documentation included with your purchase or contact APS directly.
- Spare Part Availability: EU Spare Part Availability Duration is 5 Years.
- Olubasọrọ Support: For technical assistance, warranty claims, or to inquire about spare parts, please visit the official APS Store on Amazon or contact their customer service department.
