Ọrọ Iṣaaju
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Micro MMD007 Deluxe Mini Scooter. Please read this manual thoroughly before first use and retain it for future reference. The Micro MMD007 Deluxe Mini Scooter is designed for children aged 3 years and up, with a maximum load capacity of 35 kg. It features a telescopic handlebar for adjustable height.
Alaye Aabo
Ikilọ: Always wear a helmet and protective gear (wrist guards, elbow pads, knee pads) when riding the scooter. Adult supervision is required at all times.
- Ensure all locking mechanisms are securely fastened before each use.
- Do not ride on public roads, uneven surfaces, or near traffic.
- Avoid riding in wet conditions, at dusk, or at night.
- A ṣe apẹrẹ ẹlẹsẹ fun ẹlẹṣin kan nikan.
- Regularly check for loose parts, wear, or damage. Do not use if damaged.
- Familiarize yourself with the braking mechanism before riding.
Ṣeto
The Micro MMD007 Deluxe Mini Scooter requires minimal assembly.
- Handlebar Insertion: Insert the handlebar stem into the opening on the scooter deck until it clicks securely into place. Ensure the locking mechanism is engaged.
- Atunse Giga Handlebar: The telescopic handlebar can be adjusted to suit the rider's height.
- Wa itusilẹ iyara clamp lórí ọ̀pá ìkọ́lé.
- Ṣii clamp, adjust the handlebar to the desired height (between 48 cm and 64 cm), and then securely close the clamp.
- Ensure the handlebar is firmly locked and does not move up or down.
- Ṣayẹwo Ride-ṣaaju: Before the first ride, and before every subsequent ride, verify that all components are securely attached and in good working order. Check the wheels, brakes, and handlebar for any looseness or damage.
Awọn ilana Iṣiṣẹ
The Micro MMD007 Deluxe Mini Scooter is designed for intuitive riding.
- Bibẹrẹ: Fi ẹsẹ̀ kan sí orí àgbá kẹ̀kẹ́ kí o sì lo ẹsẹ̀ kejì láti tì í kúrò ní ilẹ̀.
- Itọnisọna: The scooter uses a lean-to-steer mechanism. To turn, lean your body in the desired direction. The handlebar will follow your lean.
- Braking: The scooter is equipped with a rear brake. To slow down or stop, gently press your foot down on the brake pedal located above the rear wheel. Apply pressure gradually to avoid sudden stops.
- Iduro: Once stopped, place both feet on the ground.
Itoju
Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti ẹlẹsẹ rẹ.
- Ninu: Pa ẹlẹsẹ-ẹsẹ nu pẹlu ipolowoamp cloth after use. Avoid using harsh chemicals or abrasive cleaners. Do not hose down or immerse the scooter in water.
- Ayẹwo Kẹkẹ: Periodically check the wheels for wear and tear. Ensure they spin freely and are not obstructed by debris.
- Ṣiṣayẹwo Bireki: Verify that the rear brake functions effectively. The brake should engage smoothly and stop the scooter efficiently.
- Ṣayẹwo Fastener: Ṣe àyẹ̀wò gbogbo àwọn skru, boltu, àti cl déédééamps to ensure they are tight. Tighten any loose fasteners as needed.
- Ibi ipamọ: Tọ́jú skọ́ọ̀tì náà sí ibi gbígbẹ, kúrò níbi tí oòrùn kò ti lè tàn án tàbí ibi tí ó gbóná jù, láti dènà ìbàjẹ́ ohun èlò.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Handlebar is loose or wobbly. | Itusilẹ ni kiakia clamp not fully tightened or handlebar not fully inserted. | Ensure the handlebar stem is fully inserted until it clicks. Tighten the quick-release clamp ni aabo. |
| Scooter does not steer smoothly. | Debris in steering mechanism or worn components. | Inspect the steering mechanism for any obstructions. Clean if necessary. If the issue persists, contact customer support. |
| Bírékì kò ṣiṣẹ́ dáadáa. | Páàdì bírékì tó ti gbó tàbí ìdọ̀tí. | Check the brake pad for wear. Clean any debris from the brake area. If the brake pad is worn, it may need replacement. |
| Àwọn kẹ̀kẹ́ kì í yípo láìsí ìyípadà. | Debris in wheel bearings or tight axles. | Remove any visible debris from around the wheels and axles. Ensure axle bolts are not overtightened. |
Awọn pato
- Awoṣe: MMD007
- Brand: Micro
- Ibiti ọjọ ori: 3 ọdun ati si oke
- O pọju fifuye: 35 kg
- Giga Handlebar: Atunṣe lati 48 cm si 64 cm
- Oriṣi Brake: Ru Braking
- Ohun elo fireemu: Irin
- Ohun elo Kẹkẹ: Ṣiṣu
- Nọmba Awọn kẹkẹ: 3
- Awọn iwọn ọja: Isunmọ 60.96 x 15.24 x 27.94 cm (L x W x H)
- Ìwọ̀n Nkan: O to 1.95 kg
- Awọn ẹya pataki: A le ṣe àpò, Fẹ́ẹ́rẹ́fẹ́
Atilẹyin ọja ati Support
For information regarding warranty coverage, replacement parts, or customer support, please refer to the official Micro Mobility Systems webaaye tabi kan si alagbata agbegbe rẹ. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
