Ìwé Ìtọ́sọ́nà Olùlò Ibùdó Ìgbàlejò Fosmon DUAL 2 MAX Xbox Controller

1. Ifihan

The Fosmon DUAL 2 MAX Charging Station is designed to provide a convenient and efficient charging solution for your Xbox controllers. This station allows you to charge two controllers simultaneously, ensuring your gaming sessions are uninterrupted by low battery warnings. It includes high-capacity rechargeable battery packs and is compatible with various Xbox controller models.

Awọn ẹya pataki:

• Dual controller charging capability.
• Includes two 5280mWh (2200mAh) rechargeable NiMH battery packs.
• Intelligent charging board with overheating, short circuit, and overcharge protection.
• LED indicators for charging status.
• Compatible with Xbox Series X/S, Xbox One, One S, One X, and Elite controllers (not compatible with Xbox Elite 2).

2. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn nkan wa ninu package:

• 1 x Fosmon DUAL 2 MAX Charging Station
• 2 x 5280mWh (2200mAh) NiMH Rechargeable Battery Packs
• 1 x 4ft (1.22 meter) Micro-USB Charging Cable (power adapter not included)
• 2 x Battery Plates for Xbox Series X/S Controllers
• 2 x Battery Plates for Xbox One, One S, One X Controllers

Akiyesi: For Xbox Elite controllers, paddles must be removed for proper docking and charging. This product is not compatible with the Xbox Elite 2 controller.

3. Awọn ilana iṣeto

1. Fi Awọn akopọ Batiri sori ẹrọ:
   Remove the existing battery cover from your Xbox controller. Insert one of the provided 5280mWh rechargeable battery packs into the controller's battery compartment. Select the appropriate battery plate for your controller model (Xbox Series X/S or Xbox One/One S/One X) and snap it into place. Ensure the battery is securely seated and the cover is properly attached.
2. Sopọ Ibusọ Gbigba agbara:
   Plug the Micro-USB end of the included charging cable into the Micro-USB port on the back of the Fosmon DUAL 2 MAX Charging Station. Connect the USB-A end of the cable to a compatible USB power source, such as an Xbox console USB port, a computer USB port, or a USB wall adapter (not included).

Image showing the installation of a rechargeable battery pack into an Xbox controller, replacing the standard battery cover with a compatible battery plate.

4. Awọn ilana Iṣiṣẹ

1. Place Controller on Dock:
   Gently place your Xbox controller, with the rechargeable battery pack installed, onto one of the charging slots on the Fosmon DUAL 2 MAX Charging Station. Ensure the controller aligns correctly with the charging contacts on the dock.
2. Bojuto Ipo Gbigba agbara:
   The LED indicator located on the front of each charging slot will illuminate to show the charging status. A red light typically indicates that the controller is charging, while a green light indicates that the battery is fully charged.
3. Yọ Oluṣakoso kuro:
   Once the LED indicator turns green, the controller's battery is fully charged. You can then remove the controller from the dock for use. The intelligent charging system will automatically stop charging to prevent overcharge once the battery is full.

Image illustrating an Xbox controller being placed onto the Fosmon DUAL 2 MAX charging station. The green arrow indicates the simple 'place and charge' mechanism.

Image of the Fosmon DUAL 2 MAX charging station with two Xbox controllers docked, showing green LED indicators for fully charged status. Two rechargeable battery packs and four battery covers are also displayed.

5. Itọju

• Ninu: Use a soft, dry cloth to clean the charging station. Avoid using liquid cleaners or abrasive materials, as these can damage the device.
• Ibi ipamọ: When not in use for extended periods, store the charging station and batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• Itọju Batiri: Do not expose the rechargeable batteries to water or extreme heat. If a battery appears damaged or swollen, discontinue use immediately and dispose of it properly according to local regulations.

6. Laasigbotitusita

• Olùdarí Kò Gba agbára:
  • Ensure the controller is correctly seated on the charging dock, making firm contact with the charging pins.
  • Verify that the Micro-USB charging cable is securely connected to both the charging station and the power source.
  • Check if the USB power source is active and providing power. Try a different USB port or wall adapter.
  • Confirm that the rechargeable battery pack is properly installed within the controller and the correct battery plate is used.
• Atọka LED Ko Ṣiṣẹ:
  • Ensure the charging station is powered on and the controller is correctly docked.
  • Ti ọrọ naa ba wa, kan si atilẹyin alabara.
• Igbesi aye batiri kukuru:
  • Ensure the batteries are fully charged (LED shows green) before use.
  • Rechargeable batteries naturally degrade over many charge cycles. If battery life significantly diminishes, consider replacing the battery packs.

7. Awọn pato

8. atilẹyin ọja Information

This Fosmon product is covered by a limited lifetime warranty. For detailed information regarding warranty terms, conditions, and how to make a claim, please refer to the official Fosmon webojula.

9. Atilẹyin

For technical assistance, product inquiries, or any other support needs, please visit the official Fosmon website or contact their customer service department. Contact information can typically be found on the Fosmon webaaye tabi lori apoti ọja.