Ìwé Ìtọ́sọ́nà Olùlò Ẹ̀rọ Ìtẹ̀wé Ilé Iṣẹ́ Intermec PD43 Series Light

Ọrọ Iṣaaju

This manual provides essential instructions for the setup, operation, and maintenance of your Intermec PD43 Series Light Industrial Printer. The PD43 is a robust and versatile thermal transfer printer designed for demanding applications in manufacturing, transportation, and warehousing environments. Featuring an all-metal chassis, proven printing mechanics, and powerful electronics, it delivers reliable performance. The integrated monochrome graphical display allows for intuitive setup, configuration, and fine-tuning of printing parameters directly from the device, enhancing user efficiency.

The PD43 supports various Intermec printer languages and can emulate other printer protocols, ensuring compatibility within diverse system environments. Its design allows for continuous printing of crisp, variable-data labels at speeds up to 150 mm/s (6 ips), utilizing industry-standard 200-mm (8-inch) label rolls and 450 m (18,000-inch) ribbons to minimize media loading downtime.

1. Eto ati fifi sori

1.1 Ṣiṣii itẹwe

• Fara yọọ itẹwe kuro ninu apoti rẹ.
• Rí i dájú pé gbogbo àwọn èròjà tí a kọ sínú ìwé ìpamọ́ wà níbẹ̀.
• Ṣe idaduro apoti atilẹba fun irinna ọjọ iwaju tabi ibi ipamọ.

1.2 Nsopọ Agbara

1. Ensure the printer's power switch is in the OFF position.
2. So okun agbara pọ si titẹ agbara itẹwe.
3. Pulọọgi opin miiran ti okun agbara sinu iṣan itanna ti o wa lori ilẹ.
4. Turn the printer's power switch to the ON position. The printer will initiate its startup sequence.

1.3 Connecting Data Cables

The PD43 printer offers multiple connectivity options:

• Àjọlò: Connect an Ethernet cable from your network to the printer's Ethernet port.
• USB: So okun USB pọ lati kọmputa rẹ si ibudo USB itẹwe.
• Tẹlentẹle: Connect a serial cable to the printer's serial port for direct communication.
• Parallel (IEEE 1284): Connect a parallel cable to the printer's parallel port if required by your system.

1.4 Loading Media (Labels and Ribbon)

Figure 1: Intermec PD43 Printer with media loaded (right) and closed (left).

Proper media loading is crucial for optimal print quality and printer operation. Refer to the printer's internal diagrams and the graphical display for specific instructions.

1. Ṣí ideri orí ẹ̀rọ ìtẹ̀wé náà.
2. Install the label roll onto the media supply spindle, ensuring the labels feed correctly according to the internal guides.
3. Install the thermal transfer ribbon onto the ribbon supply spindle, threading it through the print mechanism as indicated by the printer's guides.
4. Pa ideri oke ni aabo.
5. The printer's display will guide you through calibration if necessary.

2. Ṣiṣẹ itẹwe

2.1 Iṣakoso igbimo Loriview

The PD43 features a monochrome graphical display and a push-button control panel for easy navigation and configuration.

• Iboju ifihan: Shows printer status, menu options, and error messages.
• Awọn bọtini lilọ kiri: Used to scroll through menus and adjust settings.
• Yan/Bọtini Tẹ sii: Jẹrisi awọn aṣayan.
• Bọtini ifunni: Advances one label or a specified length of media.
• Pause/Cancel Button: Pauses printing or cancels a print job.

2.2 Ipilẹ titẹ sita

1. Ensure the printer is powered on and connected to your host system.
2. Load the appropriate labels and ribbon.
3. From your computer or host system, send the print job to the Intermec PD43 printer.
4. Monitor the printer's display for status updates or error messages.

2.3 Printer Configuration

The graphical display allows for direct configuration of various printer settings, including:

• Media type and sensor calibration.
• Print darkness and speed.
• Network settings (IP address, subnet mask).
• Printer language emulation.
• Diagnostic tests.

Navigate through the menu using the control panel buttons to access and modify these settings.

3. Itọju

Regular maintenance ensures optimal performance and extends the lifespan of your PD43 printer.

3.1 Cleaning the Printhead

• Pa ẹ̀rọ ìtẹ̀wé náà kí o sì yọ okùn agbára náà kúrò.
• Ṣii apejọ itẹwe.
• Using a lint-free cloth or a printhead cleaning pen moistened with isopropyl alcohol, gently wipe the printhead surface from center to edge.
• Allow the printhead to dry completely before closing the assembly and reconnecting power.
• Perform this cleaning regularly, especially when print quality degrades.

3.2 Wíwẹnu Ohun-ìrora Awo

• With the printer off and power disconnected, locate the platen roller beneath the printhead.
• Use a lint-free cloth moistened with isopropyl alcohol to clean the roller, rotating it manually to clean the entire surface.
• Gba laaye lati gbẹ ṣaaju lilo.

3.3 Rírọ́pò Àwọn Ohun Èlò Ìròyìn

Replace label rolls and thermal transfer ribbons as they run out. Always use media that meets Intermec specifications for the PD43 printer to ensure compatibility and print quality.

3.4 famuwia imudojuiwọn

Periodically check the Intermec support website for available firmware updates. Firmware updates can improve printer performance, add new features, or resolve known issues. Follow the instructions provided with the firmware update package carefully.

4. Laasigbotitusita

This section addresses common issues you might encounter with your PD43 printer.

If you continue to experience issues, consult the comprehensive technical manual available on the Intermec support webojula tabi kan si atilẹyin alabara.

5. Awọn pato

Key technical specifications for the Intermec PD43 Series Light Industrial Printer (Model PD43A03100010201).

• Awoṣe: PD43A03100010201
• Imọ-ẹrọ titẹ sita: Gbigbe Gbigbe
• Ipinnu Titẹjade: 203 dpi
• Iyara Titẹjade ti o pọju: 150 mm/s (ips 6)
• Asopọmọra: Ethernet, USB, Serial, Parallel IEEE 1284
• Ifihan: Monochrome Graphical Display
• Iru Iṣakoso: Titari Bọtini
• Iwọn Media ti o pọju: 8 inches
• Ìwọ̀n Nkan: 18.5 iwon
• Awọn iwọn (Apapọ): 23.5 x 14.5 x 12.5 inches
• Awọn ẹya: All-metal chassis, robust design, support for various printer languages.

6. Atilẹyin ọja ati Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) website. Technical support and additional resources, including drivers and updated documentation, are available through the manufacturer's support channels.

Atilẹyin Ayelujara: www.honeywellaidc.com/support

When contacting support, please have your printer's model number (PD43A03100010201) and serial number ready.