Phocos CIS10 IP68 10Amp Oorun idiyele Adarí User Afowoyi

1. Ifihan

This manual provides essential instructions for the safe and efficient operation of your Phocos CIS10 IP68 10Amp Solar Charge Controller. The CIS10 is designed for off-grid solar light systems and battery charging, featuring automatic 12V/24VDC system voltage detection and a robust IP68 waterproof design. Please read this manual thoroughly before installation and use.

2. Alaye Aabo

Awọn Itọsọna Aabo pataki:

• Máa so batiri náà mọ́ olùdarí agbára náà ní àkọ́kọ́, lẹ́yìn náà, so páànẹ́lì oòrùn, àti ní ìparí ẹrù náà. Jà á padà ní ìtòlẹ́sẹẹsẹ ìyípadà.
• Ensure all connections are tight and secure to prevent excessive voltage drop and loose connections.
• Install the controller in a well-ventilated area, away from flammable gases.
• Do not disassemble or attempt to repair the controller yourself. Contact qualified personnel for service.
• Wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE) nigbati o n ṣiṣẹ pẹlu awọn batiri ati awọn panẹli oorun.
• The controller is IP68 rated for water and dust ingress, but avoid submerging it for extended periods or exposing it to high-pressure water jets.

3. Awọn ẹya Ọja

The Phocos CIS10 Solar Charge Controller offers the following key features:

• IP68 Apẹrẹ Mabomire: Suitable for outdoor use, resistant to water spray, rain, and condensation.
• Aifọwọyi Voltage Iwari: Laifọwọyi ṣe awari 12V tabi 24V DC eto voltages.
• 5-Stage PWM Technology: Provides Soft Start, Bulk, Absorption, Float, and Equalization charging stages for optimal battery health and system performance.
• Ibamu Batiri gbooro: Works with LifePo4, LTO, GEL, AGM, Lead-Acid, Calcium, and EFB batteries.
• Awọn ẹya Idaabobo Olona: Built-in protection against over-temperature, over-voltage, over-current, over-charging, over-discharging, overload, and short circuits.
• Compact and Thin Design: Maximizes solar power utilization with minimal self-power consumption.

4. Eto ati fifi sori

Follow these steps for proper installation of your Phocos CIS10 controller:

1. Iṣagbesori: Choose a suitable location for mounting the controller. Although IP68 rated, mounting in a shaded or protected area can extend its lifespan. Ensure adequate space for cable connections.
2. Asopọ batiri: Connect the battery cables to the controller's battery terminals first. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the system voltage (12V tabi 24V).
   

   Image 4.1: Phocos CIS10 controller showing battery, solar panel, and load connection points, along with LED indicators for status.

3. Isopọmọ igbimọ oorun: Connect the solar panel cables to the controller's solar panel terminals. Observe correct polarity. The controller will begin charging the battery.
4. Load Connection (Optional): If using the controller for a DC load (e.g., solar light), connect the load cables to the controller's load terminals. Ensure correct polarity.
5. Jẹrisi Awọn isopọ: Double-check all connections for tightness and correct polarity before powering on the system.

The controller's compact design and integrated wiring simplify installation. Its IP68 rating ensures durability in various outdoor conditions.

Image 4.2: The Phocos CIS10 controller demonstrating its compact size with a ruler and highlighting its IP68 waterproof capability.

5. Awọn ilana Iṣiṣẹ

The Phocos CIS10 operates automatically once connected. It utilizes advanced 5-stage Pulse Width Modulation (PWM) charging technology to optimize battery charging and extend battery life.

5.1. Gbigba agbara Stages

• Ibẹrẹ Rirọ: Gradually increases current to the battery.
• Idiyele pupọ: Delivers maximum current to rapidly charge the battery to approximately 80% capacity.
• Idiyele gbigba: Gba agbara si batiri ni kan ibakan voltage to bring it to 100% capacity.
• Gbigba agbara leefofo: Ṣe itọju batiri naa ni agbara kikun nipa fifun vol kekere kan ti o duro nigbagbogbotage.
• Idogba: Automatically performs equalization every 28 days for calcium/EFB batteries to prevent sulfation and ensure cell balance.

5.2. Work Mode (Optional)

The CIS10 controller supports configurable work modes, such as time control and light control, which can be set using an optional external unit like the CIS-CU (sold separately). This allows for customized operation of connected loads, such as solar lights.

6. Itọju

The Phocos CIS10 is designed for minimal maintenance due to its robust IP68 rating and epoxy-encapsulated PCB. However, periodic checks are recommended:

• Ayewo wiwo: Periodically inspect the controller and all connections for any signs of damage, corrosion, or loose wiring.
• Ninu: If necessary, gently clean the exterior of the controller with a damp asọ. Maṣe lo awọn kẹmika lile tabi awọn ohun elo abrasive.
• Ilera Batiri: Monitor your battery's performance. The controller's equalization feature helps maintain battery health for compatible types.

7. Laasigbotitusita

The CIS10 controller includes multiple built-in protections to prevent damage. If you encounter issues, consider the following:

• No Charging/Load Output:
  • Ṣayẹwo gbogbo awọn asopọ okun waya fun wiwọ ati polarity ti o tọ.
  • Rii daju pe panẹli oorun n gba imọlẹ orun to peye.
  • Daju batiri voltage is within the operating range (12V/24V).
  • Check for any blown fuses in the system (if applicable).
• Idaabobo Iwọn otutu: If the controller becomes excessively hot, it may temporarily reduce or stop charging/output. Ensure it's not installed in an area with poor ventilation or direct, intense heat.
• Lori-Voltage / Labẹ-Voltage Idaabobo: The controller will protect the battery from overcharging or deep discharge. If the battery voltage is too low, the load may be disconnected.
• Short Circuit/Overload Protection: If a short circuit or overload occurs on the load or solar input, the controller will temporarily shut down to protect itself and the system. Remove the fault and the controller should resume normal operation.

If problems persist, refer to the detailed specifications or contact Phocos customer support.

8. Awọn pato

Detailed technical specifications for the Phocos CIS10 Solar Charge Controller:

9. Atilẹyin ọja ati Support

Phocos is a German brand known for quality assurance in solar power products. For warranty information, technical support, or service inquiries, please contact your authorized Phocos dealer or visit the official Phocos webojula. Tọju iwe-ẹri rira rẹ fun awọn ẹtọ atilẹyin ọja.

For additional resources and product updates, you may visit the Phocos official webojula.