1. Ifihan
This manual provides comprehensive instructions for the installation, operation, and maintenance of the FEIG ID ISC.PR100 Proximity Reader. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
The FEIG ID ISC.PR100 is a high-performance proximity reader designed for various applications requiring reliable RFID tag detection. It operates at 13.56MHz and offers a significant reading range.
2. Alaye Aabo
Nigbagbogbo ṣe akiyesi awọn iṣọra ailewu atẹle lati yago fun ipalara tabi ibajẹ si ẹrọ naa:
- Ensure the power supply matches the device's specifications (12-24VDC).
- Ma ṣe fi ẹrọ naa han si awọn iwọn otutu to gaju, ọriniinitutu, tabi imọlẹ orun taara.
- Yago fun sisọ silẹ tabi tẹriba ẹrọ si awọn ipa to lagbara.
- Ma ṣe gbiyanju lati ṣii tabi tun ẹrọ naa funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ.
- Ge asopọ agbara ṣaaju ṣiṣe eyikeyi fifi sori ẹrọ tabi itọju.
3. Ọja Ipariview
The FEIG ID ISC.PR100 Proximity Reader is a compact and robust device. Key features include:
- Ṣiṣẹ Igbohunsafẹfẹ: 13.56MHz
- Iṣagbewọle Voltage: 12-24VDC
- Maximum Signal Range: 180mm
- Interface: RS-232 / RS-485
- Supported Transponders: ISO-tags 15639
- Flash Memory: 64 kByte
- Kilasi Idaabobo: IP 30
Figure 3.1: FEIG ID ISC.PR100 Proximity Reader. This image shows the compact grey rectangular device with a visible connector port on one end, indicating its robust design for industrial applications.
4. Eto ati fifi sori
Follow these steps for proper installation of your ISC.PR100 Proximity Reader:
- Iṣagbesori: Securely mount the reader in the desired location using appropriate fasteners. Ensure adequate ventilation and avoid mounting near strong electromagnetic interference sources.
- Asopọ agbara: Connect the 12-24VDC power supply to the designated power input terminals. Observe correct polarity.
- Asopọmọra Iwifun data: Connect the reader to your host system using either the RS-232 or RS-485 interface, as required by your application. Refer to the device's pinout diagram for correct wiring.
- Ibi Antenna: Position the reader's antenna (if external) or the integrated antenna area to optimize read range and performance for your specific transponders.
- Agbara Ibẹrẹ: Once all connections are secure, apply power to the device. The reader should perform a self-test and indicate readiness (e.g., via an LED indicator).
5. Awọn ilana Iṣiṣẹ
The ISC.PR100 operates by detecting ISO-tags 15639 transponders within its read range. Operation is typically controlled by a host system via the connected interface (RS-232/RS-485).
5.1 Ipilẹ isẹ
- Ensure the reader is powered on and connected to the host system.
- Place an ISO-tag 15639 transponder within the reader's effective range (up to 180mm).
- The reader will detect the transponder and transmit its data to the host system according to the configured communication protocol.
5.2 Ilana ibaraẹnisọrọ
Detailed information regarding the communication protocol (commands, responses, data formats) for RS-232 and RS-485 interfaces can be found in the technical documentation provided by FEIG. It is essential to configure your host system to match the reader's communication settings (e.g., baud rate, parity, data bits, stop bits).
6. Itọju
The FEIG ID ISC.PR100 Proximity Reader is designed for low maintenance. However, regular care can extend its lifespan and ensure optimal performance.
- Ninu: Use a soft, dry cloth to clean the exterior of the device. Do not use abrasive cleaners, solvents, or excessive moisture.
- Ayewo: Periodically inspect cables and connectors for any signs of wear or damage. Ensure all connections are secure.
- Ayika: Maintain the operating environment within the specified temperature and humidity ranges to prevent damage.
7. Laasigbotitusita
If you encounter issues with your ISC.PR100, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ ti ko ni agbara lori. | Kò sí ìpèsè agbára; ìdìpọ̀ tí kò tọ́tage; okùn tí kò ní àbùkù. | Ṣayẹwo awọn asopọ agbara ati iwọn didun ipesetage. Ensure cables are not damaged. |
| Cannot read transponders. | Transponder out of range; incorrect transponder type; interference; faulty reader. | Ensure transponder is within 180mm range. Verify it's an ISO-tag 15639. Check for strong electromagnetic fields nearby. |
| Communication errors with host system. | Incorrect interface settings (baud rate, etc.); faulty data cable; software issue. | Verify communication settings match between reader and host. Check data cable integrity. Consult host system software documentation. |
If the problem persists after attempting these solutions, please contact FEIG technical support.
8. Awọn pato
| Paramita | Iye |
|---|---|
| Awoṣe | ISC.PR100 |
| Awọn ọna Voltage | 12-24VDC |
| Agbara agbara | Iye ti o ga julọ ti 5VA |
| Igbohunsafẹfẹ Ṣiṣẹ | 13.56MHz |
| Maximum Signal Range | 180mm |
| Ni wiwo | RS-232 / RS-485 |
| Atilẹyin Transponders | ISO-tags 15639 |
| Flash Memory | 64 kByte |
| Kilasi Idaabobo | IP30 |
| ASIN | B01E803L08 |
| Olupese | FEIG |
| Ọjọ Akọkọ Wa | Oṣu Kẹrin Ọjọ 1, Ọdun 2016 |
9. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the official FEIG website or contact your authorized distributor. Keep your purchase receipt as proof of purchase for warranty claims.
FEIG is committed to providing high-quality products and excellent customer service. Should you require assistance beyond the scope of this manual, do not hesitate to reach out to their support channels.
