Project Source Ceiling Fixture Instruction Manual

1. Ọja Ipariview

This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source Semi-Flushmount Ceiling Fixture. Designed for indoor use, this fixture features a white finish and an elegant etched frosted glass shade, providing diffused light suitable for various living spaces.

Image 1.1: The Project Source Semi-Flushmount Ceiling Fixture, showcasing its white base and decorative etched frosted glass shade.

2. Alaye Aabo

Jọ̀wọ́ ka gbogbo ìtọ́ni kí o sì lóye wọn kí o tó bẹ̀rẹ̀ sí í fi sori ẹ̀rọ. Àìtẹ̀lé àwọn ìtọ́ni wọ̀nyí lè yọrí sí ìkọlù iná mànàmáná, iná, tàbí àwọn ewu mìíràn tí ó lè fa ìpalára tàbí ìbàjẹ́ dúkìá.

• IKILO: To avoid electric shock, disconnect power at the circuit breaker or fuse box before installation.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with electrical wiring.
• Má ṣe fi ohun èlò yìí sí i ní ìgbà tí omi bá rọ̀ tàbí ní ìgbà tí kò rọ̀.amp awọn ipo.
• Fi ọwọ́ mú àwọn ohun èlò dígí pẹ̀lú ìṣọ́ra láti dènà ìfọ́ àti ìpalára.
• Rí i dájú pé a so ohun èlò náà mọ́ ara ẹ̀rọ tó wà lórí àjà ilé náà dáadáa.
• Use only the type and wattage of bulbs specified for this fixture.

3. Package Awọn akoonu

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

• Semi-Flushmount Ceiling Fixture Body (1)
• Etched Frosted Glass Shade (1)
• Mounting Hardware Kit (includes screws, wire nuts, mounting bracket) (1 set)
• Decorative Finial (1)
• Instruction Manual (this document) (1)

4. Eto ati fifi sori

Awọn irinṣẹ nilo (kii ṣe pẹlu): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses, ladder.

1. Pa Agbara: Locate the circuit breaker or fuse box that controls the power to the light fixture you are replacing or installing. Turn off the power completely. Verify power is off using a voltage idanwo.
2. Múra Sísopọ̀: If replacing an existing fixture, carefully remove it. Attach the mounting bracket (if not pre-attached) to the electrical junction box in the ceiling using the provided screws. Ensure the bracket is secure.
3. Awọn isopọ Waya:
   • Sopọ awọn dudu waya lati imuduro si awọn dudu (gbona) wáyà láti inú àpótí ìsopọ̀ pẹ̀lú lílo nut wáyà.
   • Sopọ awọn funfun waya lati imuduro si awọn funfun (aláìdúróṣinṣin) wáyà láti inú àpótí ìsopọ̀ nípa lílo nut waya kan.
   • Sopọ awọn Ejò aláwọ̀ ewé tàbí bàbà lásán ground wire from the fixture to the ilẹ wáyà láti inú àpótí ìsopọ̀ (tàbí sí ìdè ilẹ̀ aláwọ̀ ewé lórí àkọlé ìsopọ̀) nípa lílo nut waya.
   • Fara fi gbogbo awọn onirin sinu apoti ipade.
4. Aṣọ ìsopọ̀ mọ́ ara ìsopọ̀: Align the fixture body with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the ceiling and stable.
5. Fi sori ẹrọ Isusu: Insert the recommended type and wattage of light bulbs (not included) into the sockets. Do not exceed the maximum wattage itọkasi lori imuduro.
6. So iboji gilasi: Carefully place the etched frosted glass shade onto the fixture body. Secure it in place using the decorative finial by screwing it onto the threaded rod at the bottom of the fixture until snug. Do not overtighten.
7. Pada Agbara pada: Once installation is complete and all components are secure, restore power at the circuit breaker or fuse box. Test the light fixture.

5. Awọn ilana Iṣiṣẹ

This Project Source ceiling fixture is designed for simple operation. Once properly installed and powered, it can be controlled via a standard wall switch. If your electrical setup includes a dimmer switch, ensure it is compatible with the type of bulbs you are using.

The product specifications indicate a "Remote" control method. If your specific model includes a remote control, please refer to the separate remote control instructions for pairing and operation. Otherwise, the fixture operates solely via the wall switch.

6. Itọju

Regular maintenance will help preserve the appearance and functionality of your ceiling fixture.

• Ninu: Always turn off power to the fixture and allow it to cool before cleaning. Wipe the fixture body with a soft, dry cloth. For the glass shade, use a mild glass cleaner applied to a cloth (not directly to the glass) and wipe gently. Do not use abrasive cleaners or solvents.
• Rirọpo Boolubu: Ensure power is off and bulbs are cool before attempting to replace them. Unscrew the decorative finial and carefully remove the glass shade. Replace old bulbs with new ones of the correct type and wattage. Reattach the glass shade and finial.

7. Laasigbotitusita

Ti o ba ni awọn iṣoro pẹlu ẹrọ itanna rẹ, wo awọn iṣoro ati awọn solusan ti o wọpọ wọnyi:

If the problem persists after attempting these solutions, consult a qualified electrician or contact customer support.

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Project Source customer service. Keep your purchase receipt for warranty claims.

Fun iranlọwọ siwaju, o le ṣabẹwo si olupese ti olupese webAaye ayelujara tabi kan si laini atilẹyin wọn. Awọn alaye olubasọrọ ni a maa n rii lori apoti ọja tabi osise olupese naa. webojula.