Einhell GE-LC 18/25 Li-Solo Power X-Change Cordless Chainsaw User Manual

1. Ifihan

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell GE-LC 18/25 Li-Solo Power X-Change Cordless Chainsaw. Please read this manual thoroughly before first use and keep it for future reference. This chainsaw is designed for pruning, felling small to medium-sized trees, processing firewood, and cutting construction timber.

Figure 1: Einhell GE-LC 18/25 Li-Solo Cordless Chainsaw. This image shows the complete chainsaw, highlighting its red and black body, the Oregon guide bar, and the chain. The battery compartment is visible, indicating where the Power X-Change battery (not included) would be inserted.

2. Awọn ilana aabo

Always observe basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Keep this manual handy for quick reference.

2.1 Gbogbogbo Aabo ikilo

• Ka gbogbo ailewu ikilo ati ilana. Ikuna lati tẹle awọn ikilọ ati awọn itọnisọna le ja si mọnamọna, ina, ati/tabi ipalara nla.
• Jeki agbegbe iṣẹ mọ ki o si tan daradara. Awọn agbegbe idamu tabi awọn agbegbe dudu n pe awọn ijamba.
• Maṣe ṣiṣẹ awọn irinṣẹ agbara ni awọn bugbamu bugbamu, gẹgẹbi niwaju awọn olomi flammable, gaasi, tabi eruku. Awọn irinṣẹ agbara ṣẹda awọn ina ti o le tan eruku tabi eefin.
• Jeki awọn ọmọde ati awọn alafojusi kuro lakoko ti o nṣiṣẹ ọpa agbara. Awọn idamu le fa ki o padanu iṣakoso.

2.2 Ààbò Pàtàkì fún Ṣíìn-ín

• Wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE) including safety helmet, eye protection, hearing protection, gloves, and protective legwear.
• Ensure the chain brake is engaged before starting the chainsaw.
• Mu chainsaw duro ṣinṣin pẹlu ọwọ mejeeji nigbati nṣiṣẹ.
• Be aware of kickback. Kickback le waye nigbati imu tabi sample igi itọnisọna fọwọkan ohun kan, tabi nigbati igi ba tilekun ti o si pin awọn ẹwọn ri ni ge.
• Do not operate the chainsaw with one hand. One-handed operation may result in serious injury to the operator, helper, or bystanders.
• Ṣe itọju ẹsẹ to dara ati iwọntunwọnsi. Ma ṣe bori.
• Do not use the chainsaw in wet conditions.
• Always ensure the chain is properly tensioned and lubricated.

3. Eto ati Apejọ

Before operating your chainsaw, proper assembly and initial setup are crucial for safety and performance. This model is supplied without a battery and charger, which must be purchased separately.

3.1 Ṣiṣii silẹ

Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged. If any parts are missing or damaged, contact customer service immediately.

3.2 Fifi ọpa Itọsọna ati Pq

1. Ensure the chainsaw is switched off and the battery is removed.
2. Tú àwọn èèpo ìbòrí ẹ̀wọ̀n náà kí o sì yọ ìbòrí ẹ̀wọ̀n náà kúrò.
3. Gbe awọn pq ni ayika sprocket ati guide bar. Rii daju pe awọn egbegbe gige ti pq ti nkọju si itọsọna to tọ.
4. Fit the guide bar onto the studs, ensuring the chain fits into the groove of the guide bar.
5. Rọpo ideri ẹ̀wọ̀n náà kí o sì fi ọwọ́ mú àwọn èèpo náà. Má ṣe fún wọn ní àwọ̀ pátápátá.

3.3 Siṣàtúnṣe pq ẹdọfu

The chain tension can be adjusted without tools. Proper chain tension is vital for safe and efficient operation.

1. With the chain cover nuts slightly loose, turn the tensioning screw (usually a red dial on the side) clockwise to increase tension, or counter-clockwise to decrease tension.
2. The chain is correctly tensioned when it can be pulled away from the guide bar by approximately 2-3 mm at the center, but still moves freely around the guide bar.
3. Once tension is set, fully tighten the chain cover nuts.

3.4 Filling Chain Oil Reservoir

The chainsaw features automatic chain lubrication. It is essential to fill the oil reservoir with appropriate chain lubricant before each use.

1. Rí i dájú pé chainsaw náà wà lórí ilẹ̀ tí ó tẹ́jú.
2. Unscrew the oil reservoir cap (black cap near the handle).
3. Carefully pour chain lubricant into the reservoir until it reaches the maximum fill line.
4. Replace and securely tighten the oil reservoir cap.

Figure 2: Detail of the oil reservoir cap on the Einhell GE-LC 18/25 Li-Solo chainsaw. The black cap is located on the top of the chainsaw body, indicating the fill point for chain lubricant.

3.5 Fifi sori batiri

This chainsaw is part of the Einhell Power X-Change family and uses an 18V Lithium-Ion battery (not included).

1. Align the battery with the battery slot on the chainsaw.
2. Gbe batiri naa sinu iho titi yoo fi tẹ ni aabo sinu aaye.
3. To remove, press the release button(s) on the battery and slide it out.

Figure 3: Illustration of the battery compartment on the Einhell GE-LC 18/25 Li-Solo chainsaw. The dashed outline indicates where the Power X-Change battery would be inserted into the tool's base.

4. Awọn ilana Iṣiṣẹ

Follow these steps for safe and effective operation of your cordless chainsaw.

4.1 Bibẹrẹ awọn Chainsaw

1. Rii daju pe batiri ti gba agbara ni kikun ati fi sori ẹrọ daradara.
2. Fi ẹ̀wọ̀n ìdènà náà sí i nípa títẹ ìṣọ́ ọwọ́ iwájú síwájú títí tí yóò fi tẹ.
3. Mu chainsaw duro ṣinṣin pẹlu ọwọ mejeeji, ọkan lori imudani ẹhin ati ọkan lori mimu iwaju.
4. Yọ idaduro pq kuro nipa fifaa oluso ọwọ iwaju pada si ọna imudani iwaju.
5. Tẹ bọtini titiipa aabo (ti o ba wa) ati lẹhinna fun pọ ma nfa yipada lati bẹrẹ mọto naa.

4.2 Ige imuposi

• Felling small trees: Plan your escape path. Make a directional notch on the side of the tree in the direction of the fall, then make a felling cut from the opposite side, slightly above the notch.
• Limbing: Work from the bottom up, supporting the branch to prevent pinching. Be aware of spring-back from bent branches.
• Bucking (cutting logs): Support the log to prevent it from rolling. Cut from the top down (overbucking) or bottom up (underbucking) depending on the log's support to avoid pinching.

4.3 Idaduro Chainsaw

Release the trigger switch to stop the motor. Engage the chain brake immediately after stopping the cut or when moving between cuts.

5. Itọju

Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti chainsaw rẹ.

5.1 Ninu

• After each use, remove the battery and clean the chainsaw thoroughly.
• Remove sawdust, chips, and debris from the guide bar, chain, and sprocket area.
• Nu awọn afẹ́fẹ́ afẹ́fẹ́ mọ́ kí ó má ​​baà gbóná jù.
• Lo ipolowoamp Aṣọ láti fi nu ìta rẹ̀. Má ṣe lo àwọn kẹ́míkà líle.

5.2 Pq Pipọn

A sharp chain is crucial for efficient cutting and safety. Sharpen the chain regularly or have it professionally sharpened.

5.3 Itọju Bar Itọsọna

• Periodically clean the guide bar groove to remove accumulated sawdust.
• Flip the guide bar regularly to ensure even wear.

5.4 Ibi ipamọ

• Store the chainsaw in a dry, secure place, out of reach of children.
• Yọ batiri kuro ṣaaju ibi ipamọ.
• Ensure the chain brake is engaged and the guide bar cover is in place.

6. Laasigbotitusita

Abala yii n ṣalaye awọn ọran ti o wọpọ ti o le ba pade pẹlu chainsaw rẹ.

7. Imọ ni pato

8. Atilẹyin ọja ati Support

Einhell products are manufactured to high quality standards and are subject to strict quality controls. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webojula.

8.1 Onibara Support

For technical assistance, spare parts, or warranty claims, please contact Einhell customer service. You can find contact information on the official Einhell webaaye tabi ninu iwe ti a pese pẹlu ọja rẹ.

Àkókò Wíwà Àwọn Ohun Èlò Pàtàkì EU: ọdun meji 2

Olupese: Nvnceiw

Nọmba apakan: 4501761