Mophie Powerstation Wireless 10,000mAh External Battery Charger User Manual

Ọrọ Iṣaaju

The mophie Powerstation Wireless is a portable external battery charger designed to provide power to your mobile devices, including Qi-enabled smartphones and other USB-powered devices. With a 10,000mAh capacity, it offers extended battery life for your devices. This powerstation features both wireless charging capabilities and a USB-A output port, allowing for versatile charging options. Its Charge Vault technology ensures the battery maintains its charge over time, ready when you need it.

Ohun ti o wa ninu Apoti

• Mophie Powerstation Wireless
• 1 meter charging cable (USB-A to Micro-USB)
• Itọsọna ibere ni kiakia

Ọja Pariview

Familiarize yourself with the components of your Mophie Powerstation Wireless.

olusin 1: Iwaju View. This image displays the front of the Mophie Powerstation Wireless, highlighting the four white LED indicator lights at the top and a circular power button below them. These LEDs indicate the battery charge level.

olusin 2: Apa View pẹlu Awọn Ibudo. This image shows the side of the powerstation, featuring a standard USB-A output port for wired charging and a Micro-USB input port for recharging the powerstation itself.

olusin 3: Top View. The top surface of the powerstation is visible, featuring the mophie logo and a slightly textured surface designed for wireless charging of compatible devices.

Awọn imọlẹ Atọka LED

The four LED lights on the front of the powerstation indicate the current charge level and charging status:

• 4 Solid LEDs: 75-100% gba agbara
• 3 Solid LEDs: 50-75% gba agbara
• 2 Solid LEDs: 25-50% gba agbara
• 1 LED to lagbara: 0-25% gba agbara
• Awọn LED didan: Indicates active charging or low battery.

Ṣeto

Charging the Powerstation Wireless

Before initial use, fully charge your Mophie Powerstation Wireless.

1. Connect the included Micro-USB cable to the Micro-USB input port on the powerstation.
2. Connect the other end of the cable (USB-A) to a USB wall adapter (not included) or a computer's USB port.
3. The LED indicator lights will flash to show charging progress. All four LEDs will remain solid when fully charged.

Charging time may vary depending on the power source. A full charge typically takes approximately 4 hours.

Ngba agbara si Awọn ẹrọ rẹ

The Powerstation Wireless offers two methods for charging your devices: wireless and wired.

Awọn ilana Iṣiṣẹ

Wireless Charging (Qi-Enabled Devices)

Lati gba agbara si ẹrọ ibaramu laisi alailowaya:

1. Ensure the Powerstation Wireless is sufficiently charged.
2. Place your Qi-enabled smartphone or device directly onto the textured top surface of the powerstation.
3. Align the device centrally on the powerstation for optimal charging. The powerstation may feature magnetic alignment for mophie juice pack cases.
4. Charging should begin automatically. The LED indicators on the powerstation will illuminate to confirm active charging.

Figure 4: Wireless Charging in Progress. This image demonstrates a smartphone being wirelessly charged by placing it on the top surface of the Mophie Powerstation Wireless.

Akiyesi: Wireless charging may be slower than wired charging. Remove any thick cases or metallic objects from your device that may interfere with wireless charging.

Wired Charging (USB-A Output)

Lati gba agbara si ẹrọ nipa lilo okun:

1. Connect your device's charging cable (USB-A end) to the USB-A output port on the Powerstation Wireless.
2. So opin miiran ti okun pọ si ẹrọ rẹ.
3. Charging should begin automatically. The LED indicators on the powerstation will illuminate.

The Powerstation Wireless can charge two devices simultaneously (one wirelessly, one wired).

Ṣe-Nipasẹ Gbigba agbara: When the Powerstation Wireless is connected to a power source for recharging, it can also charge a device connected to its USB-A output port. It will prioritize charging the connected device first, then recharge itself.

Itoju

• Ninu: Use a soft, lint-free cloth to clean the surface of the powerstation. Avoid abrasive cleaners or solvents.
• Ibi ipamọ: Store the powerstation in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to charge the powerstation to about 50% every three months to maintain battery health.
• Yago fun bibajẹ: Do not drop, puncture, or disassemble the device. Keep away from water and high humidity.

Laasigbotitusita

Awọn pato

Alaye Aabo

Please read all instructions and warnings before using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire, or explosion, for which mophie is not responsible.

• Do not store device in high-temperature environments, including heat caused by intense sunlight or other forms of heat.
• Ma ṣe gbe ẹrọ sinu ina tabi awọn agbegbe gbigbona pupọju.
• Ma ṣe tunto ẹrọ yii tabi gbiyanju lati tun-idi tabi ṣe atunṣe ni eyikeyi ọna.
• Ma ṣe gbiyanju lati ropo eyikeyi apakan ti ẹrọ yii.
• Do not connect the powerstation to an input power source that exceeds its rated output.
• Do not use the powerstation if it has been damaged or modified.
• Do not expose the powerstation to water or liquids.
• This product is intended for use only in conjunction with appropriate mobile devices. Please consult your device packaging to determine if this product is compatible with your particular device.
• Ṣe abojuto awọn ọmọde lati rii daju pe wọn ko ṣere pẹlu ọja naa.
• Dispose of the powerstation in accordance with local environmental regulations.

Atilẹyin ọja ati Support

Mophie products are designed for durability and performance. For detailed warranty information, please refer to the official mophie webaaye tabi kaadi atilẹyin ọja ti o wa pẹlu ọja rẹ. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

For technical support or customer service, please visit the official mophie support website or contact their customer service department. Contact information can typically be found on the mophie webaaye ayelujara tabi ninu itọsọna Ibẹrẹ Yara.

Awọn orisun Ayelujara: www.mophie.com/support