Einhell HGG 110/1 Niro Hot Air Generator Instruction Manual

1. Ifihan

Thank you for choosing the Einhell HGG 110/1 Niro Hot Air Generator. This manual provides important information for the safe and efficient operation of your device. Please read these instructions carefully before initial use and keep them for future reference.

The HGG 110/1 Niro is a powerful and portable hot air generator designed for heating well-ventilated storage rooms, garages, workshops, and tents. Its robust construction features a galvanized sheet steel heating jacket and a stainless steel housing, ensuring durability and protection against overheating.

2. Awọn ilana aabo

IKILO: Failure to follow these safety instructions may result in fire, explosion, electric shock, or serious injury.

• Always operate the hot air generator in a daradara-ventilated agbegbe to prevent oxygen depletion and carbon monoxide poisoning.
• Do not use the heater in residential living areas.
• Keep flammable materials (e.g., paper, wood, fabrics, chemicals) at a safe distance from the heater.
• Ensure the gas cylinder is stored and connected according to local regulations. Use only propane/butane gas.
• Má ṣe fi ohun èlò ìgbóná tí ń ṣiṣẹ́ sílẹ̀ láìsí olùtọ́jú.
• Má ṣe dí ọ̀nà tí afẹ́fẹ́ yóò gbà wọlé tàbí tí yóò ṣí sílẹ̀.
• Jeki awọn ọmọde ati ohun ọsin kuro ni ẹrọ ti ngbona.
• Regularly check the gas hose and connections for leaks or damage. Replace immediately if any damage is found.
• Do not touch hot surfaces during operation or immediately after shutdown.
• In case of gas smell, immediately shut off the gas supply, ventilate the area, and do not operate any electrical switches or ignition sources.
• The device is equipped with a thermostatic protection device against overheating and piezoelectric flame protection, which automatically shuts off the gas in case of danger. Do not attempt to bypass these safety features.
• Only use the provided pressure regulator and gas hose.

3. Ọja Ipariview

The Einhell HGG 110/1 Niro is designed for robust performance and ease of use. Key features include:

• Robust heating jacket made of galvanized sheet steel.
• Durable housing made of stainless steel.
• Integrated piezo ignition for easy startup.
• Thermostatic protection device against overheating.
• Backfire protection and piezoelectric flame protection for enhanced safety.
• Practical carrying handle for easy transport.
• Fan switch for independent fan operation.
• Includes pressure regulator and gas hose.

Nọmba 1: Einhell HGG 110/1 Niro Hot Air Generator. This image shows the main unit of the hot air generator, highlighting its stainless steel casing, integrated carrying handle, and control switch at the front base.

4. Eto

1. Ṣii silẹ: Carefully remove the hot air generator and all accessories from the packaging. Check for any damage.
2. Ipo: Place the generator on a stable, level, non-flammable surface in a well-ventilated area. Ensure adequate clearance from walls and flammable materials.
3. Isopọ Silinda Gaasi:
   • Rí i dájú pé fáìlì sílíńdà gaasi ti wà ní títì.
   • Connect the supplied pressure regulator to a standard 5 kg or 11 kg propane/butane gas cylinder.
   • Attach the gas hose from the pressure regulator to the gas inlet on the hot air generator. Ensure all connections are tight and secure.
   • Perform a leak test on all gas connections using soapy water. Bubbles indicate a leak. Do not proceed if a leak is detected.
4. Asopọ agbara: Connect the power cable to a suitable electrical outlet (refer to specifications for voltage ibeere).

5. Awọn ilana Iṣiṣẹ

5.1 Bibẹrẹ monomono

1. Ensure all setup steps are completed and safety precautions are observed.
2. Ṣii awọn àtọwọdá lori gaasi silinda.
3. Tẹ mọlẹ gaasi àtọwọdá bọtini on the generator.
4. While holding the gas valve button, press the bọtini ina (piezo ignition) repeatedly until the flame ignites. You should hear a clicking sound and see the flame.
5. Continue to hold the gas valve button for a few seconds after ignition to allow the flame protection device to engage.
6. Release the gas valve button. The flame should remain lit.
7. Switch the fan on using the integrated fan switch. The fan will start circulating hot air.

5.2 Tiipa monomono

1. Close the valve on the gas cylinder first. This allows any remaining gas in the hose to burn off.
2. Once the flame extinguishes, switch off the fan using the integrated fan switch.
3. Ge okun agbara kuro ninu iho ina.
4. Gba aaye laaye lati tutu patapata ṣaaju gbigbe tabi titoju.

Nọmba 2: Einhell HGG 110/1 Niro in a typical application setting. This image illustrates the hot air generator operating in a spacious, well-ventilated area, such as a construction site or workshop, demonstrating its intended use for heating open spaces.

6. Itọju

Regular maintenance ensures the longevity and safe operation of your hot air generator. Always disconnect the power supply and gas cylinder before performing any maintenance.

• Ninu:
  • Mu ese ita kuro pẹlu ipolowoamp asọ. Ma ṣe lo abrasive ose tabi epo.
  • Ensure air inlet and outlet grilles are free from dust and debris. Use a soft brush or vacuum cleaner if necessary.
• Póìpù Gáàsì àti Àwọn Ìsopọ̀:
  • Inspect the gas hose regularly for cracks, cuts, or signs of wear. Replace immediately if damaged.
  • Ṣayẹwo gbogbo awọn asopọ gaasi fun wiwọ.
• Ibi ipamọ:
  • When not in use, store the generator in a dry, dust-free place, away from direct sunlight and extreme temperatures.
  • Disconnect the gas cylinder and store it separately in a well-ventilated area according to local regulations.

7. Laasigbotitusita

8. Imọ ni pato

9. Atilẹyin ọja ati Support

For information regarding the product warranty, please refer to the warranty card included with your purchase or contact the retailer where the product was acquired. Warranty terms and conditions may vary by region and seller.

For technical support, spare parts, or service inquiries, please contact Einhell customer service or your authorized Einhell dealer. Contact details can typically be found on the manufacturer's official webojula tabi ninu rẹ ra iwe.