Ìwé Ìtọ́ni fún Àgbàja Onígbèsè MyCharge HubMax (Àwòṣe HB10V)

Ọrọ Iṣaaju

The myCharge HubMax portable charger, model HB10V, is a versatile power bank designed to provide on-the-go power for your mobile devices. It features a 10050mAh internal battery, integrated Lightning and Micro USB charging cables, and a built-in wall plug for convenient recharging of the power bank itself. This manual provides instructions for the proper use and care of your HubMax charger.

Ṣeto

Initial Charging of the HubMax

Before first use, fully charge your myCharge HubMax. The device features a foldable wall plug for direct connection to a standard AC outlet.

1. Locate the foldable wall prongs on the side of the HubMax.
2. Flip out the prongs and plug the HubMax directly into a wall outlet.
3. The LED indicators on the device will illuminate to show the charging status. A full recharge typically takes approximately 4.6 hours.
4. Once fully charged, unplug the device and fold the prongs back into the unit for storage.

Awọn ilana Iṣiṣẹ

Ngba agbara si Mobile Devices

The HubMax allows you to charge up to three devices simultaneously using its built-in cables and USB-A port.

1. Lilo awọn okun waya ti a ṣe sinu rẹ: Extend the integrated Lightning cable for Apple devices or the Micro USB cable for compatible Android and other devices. Connect the appropriate cable to your device's charging port.
2. Lilo ibudo USB-A: For devices requiring a different cable type (e.g., USB-C), connect your device's standard USB charging cable to the USB-A output port on the HubMax.
3. The HubMax will automatically begin charging your connected device(s). The LED indicators will show the remaining battery capacity of the HubMax.
4. For optimal charging speed, ensure your device is compatible with Power Delivery or Quick Charge 3.0 standards, which the HubMax supports for faster charging (up to 2.4x faster than standard chargers).

Itoju

Proper maintenance ensures the longevity and optimal performance of your myCharge HubMax.

• Ninu: Lo asọ ti o tutu, ti o gbẹ lati nu ita ti ẹrọ naa. Yago fun lilo awọn kẹmika lile tabi awọn ohun elo abrasive.
• Ibi ipamọ: Store the HubMax in a cool, dry place away from direct sunlight and extreme temperatures.
• Itọju Batiri: For best battery health, avoid fully discharging the power bank frequently. Recharge it when the battery level is low.
• Itọju USB: Handle the built-in cables gently. Avoid excessive bending or pulling to prevent damage.

Laasigbotitusita

If you encounter issues with your myCharge HubMax, refer to the following common solutions:

• HubMax Not Charging:
  • Ensure the wall plug is fully extended and securely inserted into a working AC outlet.
  • Ṣayẹwo boya iṣanjade naa n ṣiṣẹ nipa pilogi sinu ẹrọ miiran.
• Device Not Charging from HubMax:
  • Verify that the HubMax itself has sufficient charge (check LED indicators).
  • Ensure the built-in cables or your external USB cable are securely connected to both the HubMax and your device.
  • Try a different cable or device to isolate the issue.
• Gbigba agbara lọra:
  • Ensure your device is compatible with fast charging protocols supported by the HubMax.
  • Yago fun lilo ẹrọ rẹ lọpọlọpọ lakoko ti o ngba agbara, nitori eyi le fa fifalẹ ilana gbigba agbara.

Awọn pato

Atilẹyin ọja ati Support

For warranty information and customer support, please refer to the official myCharge webojula tabi kan si wọn onibara iṣẹ taara. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.

Olupese: miCharge

Fun iranlọwọ siwaju sii, ṣabẹwo: www.mycharge.com