Ọrọ Iṣaaju
The TASCAM MiNiSTUDIO Personal US-32 is a desktop online broadcast studio designed for podcasters, gamers, and online broadcasters. It features a professional-quality audio interface and real-time effects to enhance your audio productions.
This manual provides instructions for setting up, operating, and maintaining your US-32 MiniStudio, along with troubleshooting tips and product specifications.
Nọmba 1: The Tascam US-32 MiniStudio USB Podcasting Broadcast Audio Interface. This image provides a general overview ti ẹrọ.
Ṣeto
Package Awọn akoonu
Rii daju pe gbogbo awọn eroja wa:
- Tascam US-32 MiniStudio Unit
- Okun USB
- Afowoyi Olumulo (iwe-ipamọ yii)
Nsopọ ẹrọ naa
The US-32 MiniStudio connects to your computer via a USB 2.0 cable. It can be powered by the USB bus or an optional 5V DC adapter for tablet use.
- Connect the USB cable from the US-32 MiniStudio to an available USB port on your computer.
- If using with a tablet or requiring external power, connect a 5V DC power adapter (not included) to the "DC IN 5V" port.
- Ensure the POWER switch on the rear panel is in the "ON" position.
Nọmba 2: Rear panel connections of the Tascam US-32 MiniStudio. This image displays the power switch, USB 2.0 port for computer connection, and the DC IN 5V port for external power, typically used with tablets.
Software fifi sori
Before using the US-32 MiniStudio, install the necessary drivers and control software from the official Tascam website. The device supports ASIO/WDM for Windows and Core Audio for Mac.
- Visit the official Tascam support webojula.
- Locate the drivers and control software for the US-32 MiniStudio.
- Download and run the installer, following the on-screen instructions.
- Tun kọmputa rẹ bẹrẹ ti o ba ṣetan.
Awọn ilana Iṣiṣẹ
Microphone Input Options
The US-32 MiniStudio offers versatile microphone input options:
- XLR/TRS Input Jack: For professional microphones, with switchable +48V phantom power for condenser microphones.
- Built-in Condenser Mic: For convenient, immediate use without external microphones.
- 4-pole Mini-jack: For connecting earphone/microphone headsets.
Ensure appropriate input gain is set using the dedicated knob to achieve optimal audio levels without distortion.
PON Sound Effect Buttons
The three assignable PON buttons allow for instant playback of sound effects. The unit comes with pre-loaded effects like bell, buzzer, and applause. You can also customize these buttons with your own .wav or .mp3 audio files using the control software.
- Open the US-32 MiniStudio control software on your computer.
- Navigate to the PON button assignment section.
- Double-click on a button in the software interface to select an audio file (.wav or .mp3) from your computer.
- Once assigned, press the physical PON button on the unit to trigger the sound effect during your broadcast.
Real-time Voice Effects
The US-32 MiniStudio includes real-time voice effects accessible via the control software. These effects can modify your voice with pitch shifts, echo, shortwave radio effects, and studio-quality reverb.
- Access voice effects through the control software.
- Adjust parameters such as pitch, echo depth, and reverb type.
- The "ducking" effect can automatically lower background music when you speak.
Nọmba 3: Front panel of the Tascam US-32 MiniStudio. This image highlights the various control knobs for input levels, the three assignable PON sound effect buttons, and the prominent ON AIR button for broadcast control.
"ON AIR" Function
The "ON AIR" button integrates your voice and effects with other audio sources from your computer, such as music or video playback. Pressing this button activates the broadcast mix.
- Ensure all audio sources (microphone, computer audio, effects) are properly configured in the control software.
- Press the "ON AIR" button to begin broadcasting your mixed audio.
Abojuto Audio
The US-32 MiniStudio provides two headphone outputs for monitoring: a 1/4" output and a 1/8" output (marked "headset"). Both outputs share a single volume control.
Nọmba 4: Tascam US-32 MiniStudio in a typical usage scenario. The device is connected to a laptop, and headphones are plugged in, demonstrating its application in a broadcasting or podcasting setup.
Itoju
To ensure the longevity and optimal performance of your Tascam US-32 MiniStudio, follow these maintenance guidelines:
- Ninu: Lo asọ asọ ti o gbẹ lati nu ode ti ẹyọ naa. Yago fun abrasive ose, nkanmimu, tabi waxes.
- Ibi ipamọ: Tọju ẹyọ naa ni itura, aye gbigbẹ kuro lati orun taara, awọn iwọn otutu ti o ga, ati ọriniinitutu giga.
- Mimu: Mu ẹrọ naa pẹlu itọju. Yago fun sisọ silẹ tabi tẹriba si awọn ipa to lagbara.
- Afẹfẹ: Rí i dájú pé afẹ́fẹ́ ń tàn káàkiri ẹ̀rọ náà kí ó má baà gbóná jù. Má ṣe dí àwọn afẹ́fẹ́ kankan.
- Agbara Pa: Always power off the unit and disconnect it from the power source when not in use for extended periods or during electrical storms.
Laasigbotitusita
If you encounter issues with your US-32 MiniStudio, refer to the following common problems and solutions:
No Sound or Low Audio Output
- Ṣayẹwo Awọn isopọ: Ensure all cables (USB, microphone, headphones) are securely connected.
- Awọn ipele Iwọn: Verify that the input gain knobs on the US-32 and the master volume control are turned up. Check software volume settings on your computer.
- Agbara Phantom: If using a condenser microphone, ensure +48V phantom power is enabled for the XLR input.
- Iru gbohungbohun: Some high-end dynamic microphones may require an external preamp for optimal gain, as the built-in preamps might not provide sufficient amplification for all models.
- Eto Software: Confirm that the US-32 MiniStudio is selected as the default audio input/output device in your computer's sound settings and your broadcasting software.
Background Noise or Hum
- Yipo ilẹ: Try connecting the computer and US-32 to the same power outlet or using a ground loop isolator.
- Didara okun: Use high-quality, shielded cables for microphones and other connections.
- Gba Staging: Ensure input gain is set appropriately. Too high gain can ampariwo ariwo.
- Ayika: Minimize electrical interference from other devices (e.g., fluorescent lights, power adapters).
PON Buttons or Effects Not Working
- Software Running: The PON buttons and voice effects require the Tascam control software to be running in the background.
- Awọn iṣẹ iyansilẹ: Verify that sound files are correctly assigned to the PON buttons within the software.
- Default Audio Device: Ensure the US-32 is set as the default audio device, as some effects may route through it.
Device Not Recognized by Computer
- Asopọ USB: Gbiyanju ibudo USB ti o yatọ tabi okun USB.
- Awọn awakọ: Reinstall the latest drivers from the Tascam webojula.
- Agbara: Ensure the unit is powered on. If using external power, verify the adapter is working.
- Tun bẹrẹ: Restart your computer and the US-32 MiniStudio.
Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Nọmba awoṣe | US-32 |
| Iwọn Nkan | 13.4 iwon |
| Ọja Mefa | 5.11 x 5.9 x 1.57 inches |
| Ni wiwo Hardware | USB |
| Asopọmọra Technology | USB |
| Nọmba ti awọn ikanni | 4 |
| Awọn ẹrọ ibaramu | Kọmputa ti ara ẹni |
| Software atilẹyin | ASIO/WDM (for Windows), Core Audio (for Mac) |
| Eto isesise | Windows (and Mac via Core Audio) |
| Voltage | 48 Volts (fun agbara Phantom) |
| Awọn batiri | Awọn batiri AA 6 nilo |
| Ọjọ Akọkọ Wa | Oṣu Karun ọjọ 6, Ọdun 2016 |
Note: While specifications mention "6 AA batteries required," the primary power source for the US-32 is typically USB bus power or an optional 5V DC adapter. Please refer to the official Tascam documentation for definitive power requirements.
Atilẹyin ọja ati Support
For warranty information, technical support, or service inquiries, please contact Tascam customer support directly or visit their official webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
Tascam Official Webojula: https://tascam.com/us/
