PowerA Charge & Display Station for PlayStation VR Instruction Manual

Ọrọ Iṣaaju

The PowerA Charge & Display Station is designed to provide a secure and organized solution for your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers. This station allows for simultaneous charging of one DUALSHOCK 4 controller and two PlayStation Move controllers, while also serving as a dedicated display stand for your PlayStation VR headset. This manual provides essential information for proper setup, operation, and maintenance of your device.

Package Awọn akoonu

• PowerA Charge & Display Station
• Adaparọ Agbara AC

Alaye Aabo

• Ka gbogbo awọn ilana ṣaaju ṣiṣe ẹrọ naa.
• Pa ẹrọ naa mọ kuro ninu omi tabi ọrinrin pupọ.
• Ma ṣe gbiyanju lati tunto tabi yi ẹrọ naa pada.
• Use only the provided AC power adapter.
• Rii daju pe fentilesonu to dara ni ayika ẹrọ lakoko iṣẹ.
• Place the station on a stable, flat surface to prevent tipping.

Ṣeto

1. Yọ Ibusọ naa kuro: Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
2. Assemble the Station: Connect the vertical stand to the base unit. Ensure it clicks securely into place.
3. So agbara: Insert the small end of the AC power adapter into the power input port located at the rear of the station's base.
4. Okun Agbara Ona: Utilize the cable management grooves on the underside of the base to route the power cable neatly. There are grooves for rear, left, and right exits.
5. Pulọọgi sinu Ijade: Pulọọgi ohun ti nmu badọgba agbara AC sinu iṣan ogiri boṣewa kan.

The back of the station, featuring the power input and integrated cable management channels to keep your setup tidy.

Pro ẹgbẹfile of the Charge & Display Station, illustrating the support structure for the PSVR headset and the charging docks for controllers.

Awọn ilana Iṣiṣẹ

1. Displaying the PSVR Headset:
   • Gently place your PlayStation VR headset onto the designated cradle at the top of the station.
   • Adjust the headset's band to ensure a secure and stable fit on the stand. This helps prevent accidental slipping.
   • Route the headset's cable around the stand for organized storage.
2. Charging DUALSHOCK 4 Controller:
   • Align the DUALSHOCK 4 controller with the charging port on the front-left dock of the station.
   • Press the controller down firmly onto the spring-loaded connector until it seats properly.
   • A light indicator on the controller will illuminate, confirming that charging has begun.
3. Charging PlayStation Move Controllers:
   • Insert each PlayStation Move controller into its respective charging slot on the front-right of the station.
   • Ensure the controllers are fully seated in the docks for a proper connection.
   • The indicator lights on the Move controllers will show their charging status.

The PowerA Charge & Display Station, fully assembled and ready to hold and charge your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers.

The PlayStation VR headset positioned on its dedicated stand. Adjust the headset band for a secure fit on the display cradle.

Detail of the DUALSHOCK 4 controller charging dock. Ensure the controller is firmly seated for proper connection and charging.

Detail of the PlayStation Move controller charging docks. Place controllers securely into the slots for charging.

Itoju

• Ninu: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the station. Do not use abrasive cleaners or solvents.
• Ibi ipamọ: When not in use for extended periods, store the station in a cool, dry place.

Laasigbotitusita

• Awọn Oluṣakoso Ko Gba agbara:
  • Ensure the power adapter is securely connected to both the station and the wall outlet.
  • Verify that controllers are properly seated in their respective charging docks. For DUALSHOCK 4, ensure it is pressed down firmly onto the spring-loaded connector.
  • Check for any obstructions or debris in the charging ports.
• PSVR Headset Slips Off Stand:
  • Ensure the PSVR headset's adjustable band is tightened to its default or a smaller size when placed on the stand. A loose band may cause the headset to slip.
  • Confirm the station is on a stable, level surface.

Awọn pato

• Nọmba awoṣe: 1426810-01
• Awọn iwọn ọja: 13.4 x 9.5 x 5.6 inches
• Ìwọ̀n Nkan: 1.88 iwon
• Olupese: Agbara
• Ibamu: PlayStation VR Headset, DUALSHOCK 4 Controller, PlayStation Move Controllers

Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the official PowerA webojula tabi kan si wọn onibara iṣẹ taara. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.