True Mfg T-49F-HC 2-Door Reach-In Freezer User Manual

Ọrọ Iṣaaju

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your True Mfg T-49F-HC 2-Door Reach-In Freezer. Please read this manual thoroughly before operating the unit and retain it for future reference.

Ọja Pariview

Nọmba 1: True Mfg T-49F-HC 2-Door Reach-In Freezer. This image displays the full unit, highlighting its stainless steel construction, two self-closing doors with recessed handles, and the bottom-mounted refrigeration system with a louvered panel for air intake.

The True Mfg T-49F-HC is a commercial-grade, two-door reach-in freezer designed for professional food service environments. It features a high tensile strength stainless steel exterior and an NSF approved aluminum interior liner with a stainless steel floor. The unit is engineered to maintain cabinet temperatures of -10°F, ensuring optimal preservation of frozen goods. It utilizes eco-friendly R290 refrigerant and is UL listed and NSF-7 Compliant.

Eto ati fifi sori

Ṣiṣi silẹ

• Ni ifarabalẹ yọ gbogbo awọn ohun elo apoti kuro, pẹlu teepu ati awọn fiimu aabo.
• Inspect the unit for any shipping damage. Report any damage immediately to the carrier and your supplier.
• Retain packaging materials for potential future shipping or claims.

Ipo

• Position the freezer on a strong, level surface capable of supporting its weight when fully loaded.
• Ensure adequate air circulation around the unit. Maintain a minimum of 6 inches (15 cm) of clearance from walls and other equipment for proper ventilation of the condenser.
• Avoid placing the unit near heat sources (e.g., ovens, direct sunlight) or in areas with high humidity.
• The unit comes with casters for mobility; ensure they are locked once the unit is in its final position.

Asopọ Itanna

• The freezer requires a dedicated 115V/60Hz/1-ph electrical outlet.
• The unit is equipped with a 9 ft cord and a NEMA 5-15P plug.
• Ma ṣe lo awọn okun itẹsiwaju tabi awọn pilogi ohun ti nmu badọgba.
• Ensure the electrical supply matches the requirements listed on the unit's data plate.

Awọn ilana Iṣiṣẹ

Ibẹrẹ Ibẹrẹ

• After positioning and connecting to power, allow the unit to sit for at least 2 hours before turning it on. This allows refrigerants to settle.
• Turn on the unit using the power switch, typically located near the control panel.
• Allow the freezer to reach its operating temperature of -10°F before loading products. This may take several hours.

Iṣakoso iwọn otutu

• The digital temperature display and controls are located on the top front of the unit.
• Refer to the specific control panel instructions for adjusting temperature settings. The factory preset is -10°F.
• Avoid frequent temperature adjustments.

Awọn ọja ikojọpọ

• Distribute products evenly on the six adjustable, heavy-duty PVC coated wire shelves.
• Do not block air vents inside the cabinet, as this can impede airflow and affect cooling efficiency.
• Avoid overloading shelves beyond their rated capacity.

Isẹ ilẹkun

• The unit features self-closing, positive sealing swing doors.
• Ensure doors close completely after each use to maintain temperature and energy efficiency.
• The doors are equipped with 12-inch long recessed handles and locks for security.

Itoju

Deede Cleaning

• Òde: Clean the stainless steel exterior regularly with a mild soap and water solution and a soft cloth. Wipe in the direction of the grain. Avoid abrasive cleaners or scouring pads.
• Inu inu: Clean the NSF approved aluminum interior liner and stainless steel floor with a mild, non-abrasive cleaner. Rinse with clean water and dry thoroughly.
• Awọn ibi ipamọ: Remove and clean the PVC coated wire shelves as needed.

Condenser Coil Cleaning (Monthly/Quarterly)

The condenser coil, located at the bottom of the unit, accumulates dust and debris, which can reduce efficiency and lead to compressor failure. Clean it regularly:

1. Ge asopọ kuro lati ipese agbara.
2. Locate the louvered panel at the bottom front of the unit and remove it.
3. Use a stiff brush or vacuum cleaner with a brush attachment to remove dust and lint from the condenser fins. Be careful not to bend the fins.
4. Replace the louvered panel and reconnect power.

Door Gasket Inspection

• Regularly inspect the door gaskets for cracks, tears, or signs of wear.
• Ensure gaskets form a tight seal when the doors are closed. A poor seal can lead to temperature fluctuations and increased energy consumption.
• Clean gaskets with warm, soapy water. Replace damaged gaskets promptly.

Laasigbotitusita

Ṣaaju ki o to kan si iṣẹ, tunview Awọn iṣoro ti o wọpọ ati awọn solusan wọnyi:

Ti iṣoro naa ba wa lẹhin igbiyanju awọn ojutu wọnyi, jọwọ kan si onimọ-ẹrọ iṣẹ ti o peye.

Awọn pato

Atilẹyin ọja ati Support

Alaye atilẹyin ọja

• 3-Year Warranty on Labor: Covers labor costs for repairs due to manufacturing defects.
• 3-Year Warranty on Parts: Covers replacement parts due to manufacturing defects.
• Additional 2 Years (5 Years Total) on Compressor: Extends compressor warranty to a total of five years.

For detailed warranty terms and conditions, please refer to the official True Manufacturing warranty document or contact True customer service.

Onibara Support

For technical assistance, parts, or warranty claims, please contact True Manufacturing customer support. Have your model number (T-49F-HC) and serial number ready when you call.

O tun le ṣabẹwo si osise naa TRUE Store on Amazon fun alaye siwaju sii ati ọja oro.