Ọrọ Iṣaaju
The SMALLRIG Universal Microphone Shock Mount 1859 is designed to isolate your shotgun microphone from vibrations and handling noise. Featuring a four-point suspension system, it ensures clean audio recording by minimizing unwanted mechanical sounds. This versatile accessory can be easily mounted on cameras via a cold shoe or on boompoles and universal handles using its 3/8"-16 threaded connection.
Aworan: Iwaju view of the SMALLRIG Universal Microphone Shock Mount 1859, showcasing its robust design and cold shoe base.
Package Awọn akoonu
Jọwọ rii daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:
- 1 x SMALLRIG Cold Shoe Adapter (ID: 1858)
- 1 x Microphone Shock Mount Adapter
- 4 x Rubber Support Bands (plus spares)
Image: Components included in the package: the shock mount, cold shoe adapter, and rubber bands.
Awọn ẹya ara ẹrọ
- Four-Point Suspension: Designed to effectively reduce handling noise and vibrations for clearer audio.
- Igun Atunse: Features a knob for easy 180° angle adjustment, allowing flexible microphone positioning.
- Awọn aṣayan Iṣagbesori pupọ: Includes an integrated cold shoe for camera mounting and a 3/8"-16 threaded hole for boompoles or universal handles.
- Ikole ti o tọ: Ti a ṣe pẹlu awọn ohun elo ti o ga julọ fun iṣẹ ṣiṣe pipẹ.
Ibamu
The shock mount is compatible with shotgun microphones and other microphones with a diameter between 0.59 - 1.57 inches (15 - 40mm). Specific compatible models include:
- Rode: NTG1, NTG2, NTG3, NTG4, NTG4+
- Sennheiser: MKE 600, MKH 416, ME 66 K6, MKH 8060, MKH8070, MKH 418
- Azden: SGM-1X
- Audio-Technica: AT897, AT835ST, BP4029, AT4073, BP4073
- Schoeps: CMIT 5U, SuperCMIT 2U
- Shure: VP82, VP89S
- Neumann: KMR-81i, KMR-81D, Sanken CS-1, CS-2, CS-3e
- Voice Technologies: VT500
Image: A visual representation of the shock mount's compatibility with various microphone brands and models.
Eto ati fifi sori
1. So gbohungbohun
- Gently insert your compatible microphone into the rubber support bands of the shock mount. Ensure the microphone is securely held by all four bands.
2. Mounting to a Camera (Cold Shoe)
- Locate the cold shoe adapter at the base of the shock mount.
- Slide the cold shoe adapter into the cold shoe mount on your camera or camera cage.
- Mu knurled wheel on the cold shoe adapter to secure the shock mount firmly in place.
Image: The shock mount attached to a camera's cold shoe, with an inset showing the cold shoe and 3/8"-16 threaded hole.
3. Mounting to a Boompole or Handle (3/8"-16 Thread)
- Unscrew the cold shoe adapter from the base of the shock mount to reveal the 3/8"-16 threaded hole.
- Screw the shock mount onto a boompole, light stand, or universal handle that has a 3/8"-16 screw.
- Ensure the connection is tight and secure before use.
Image: The shock mount integrated into a camera rig, demonstrating its versatility with a cold shoe adapter and 25mm rod clamp.
Isẹ
Siṣàtúnṣe Angle
The SMALLRIG Microphone Shock Mount features an adjustable knob that allows for a 180° tilt. To adjust the angle:
- Loosen the adjustment knob located on the side of the shock mount.
- Tilt the microphone to your desired angle.
- Tighten the adjustment knob firmly to lock the angle in place.
Image: Diagram illustrating the 180-degree angle adjustment capability of the shock mount.
Itoju
To ensure the longevity and optimal performance of your SMALLRIG Microphone Shock Mount, follow these maintenance guidelines:
- Ninu: Mu ese kuro pẹlu asọ ti o tutu, ti o gbẹ lati yọ eruku ati idoti kuro. Yago fun lilo awọn kẹmika lile tabi awọn ohun elo abrasive.
- Rubber Bands: Periodically inspect the rubber support bands for signs of wear, stretching, or cracking. Replace them if necessary using the provided spare bands to maintain effective shock absorption.
- Ibi ipamọ: Store the shock mount in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Tira: Regularly check all screws and connections to ensure they are securely tightened.
Laasigbotitusita
If you encounter any issues with your SMALLRIG Microphone Shock Mount, please refer to the following common troubleshooting tips:
- Microphone Not Secure:
- Ensure the microphone diameter is within the compatible range (15-40mm).
- Check if the rubber bands are properly seated and not damaged. Replace if worn.
- Ariwo/Ariwo Pupọ:
- Verify that the microphone is correctly positioned within the shock mount and not touching the frame.
- Inspect the rubber bands for any damage or loss of elasticity. Replace if needed.
- Ensure the shock mount is securely attached to your camera or mounting device.
- Angle Adjustment Loose:
- Tighten the adjustment knob firmly after setting the desired angle.
If the issue persists, please contact SMALLRIG customer support for further assistance.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | 1859 |
| Awọn iwọn (L x W x H) | 5.5 x 5 x 12.1 cm (2.17 x 1.97 x 4.76 inches) |
| Iwọn | 73 Giramu (0.16 lbs) |
| Ohun elo | (Not explicitly stated, but implied durable plastic/metal from description) |
| Àwọ̀ | Dudu |
| Microphone Diameter Compatibility | 15mm - 40mm (0.59 - 1.57 inches) |
| Iṣagbesori Aw | Cold Shoe, 3/8"-16 Thread |
| Atunse igun | 180° |
| Awọn irinše to wa | Shock Mount, Cold Shoe Adapter, 4x Rubber Support Bands |
| UPC | 697207062322 |
Image: Detailed dimensions of the shock mount, showing 13mm and 45mm measurements.
Atilẹyin ọja ati Support
This SMALLRIG product comes with a 2-odun olupese ká atilẹyin ọja. For warranty claims, technical support, or any inquiries regarding your product, please contact SMALLRIG customer service directly.
Olupese: SMALLRIG
For more information and support, visit the official SMALLRIG webaaye tabi tọka si iwe rira rẹ.
