Electro-Harmonix Blurst! Modulated Filter Pedal User Manual

Ọrọ Iṣaaju

The Electro-Harmonix Blurst! is a modulated filter pedal designed for guitarists and bass players. It integrates technology from keyboard and modular synthesizers to create dynamic filter effects. Unlike traditional envelope filters, the Blurst!'s filter response is controlled by an internal oscillator, offering unique sonic exploration.

Aworan: Iwaju view of the Electro-Harmonix Blurst! Modulated Filter Pedal, showcasing its controls and distinctive graphic design.

Ṣeto

Follow these steps to properly set up your Blurst! pedal:

1. Asopọ agbara: Connect a 9V DC power adapter (center positive) to the 9V power jack on the top of the pedal. The Blurst! requires a 9V battery or a 9V DC power supply.


Aworan: Apa view of the Blurst! pedal, highlighting the 9V power input jack.

2. Asopọ-iwọle: So ohun èlò orin rẹ (gítà, bass, àti bẹ́ẹ̀ bẹ́ẹ̀ lọ) mọ́ ÀWỌN Ọ̀RỌ̀ jack ní apá ọ̀tún ti pedal nípa lílo okùn irinṣẹ́ 1/4-inch boṣewa.
3. Asopọ jade: Sopọ awọn IJADE ọpá ìkọsẹ̀ ní apá òsì ti pedal sí tirẹ amplifier or the next effect pedal in your signal chain using a standard 1/4-inch instrument cable.


Aworan: Angled view of the Blurst! pedal, showing the input and output jacks for instrument connection.

4. Pẹda ìṣípayá (Àṣàyàn): For external control, connect an expression pedal or a Control Voltage (CV) source (such as the EHX 8 Step Program Analog Expression/CV Sequencer) to the EXP jack on the left side of the pedal.

Awọn ilana Iṣiṣẹ

The Blurst! pedal features several controls to shape your modulated filter sound:

Awọn iṣakoso:

• Bọtini VOL: Ó ń ṣàkóso gbogbo ìwọ̀n ìjáde ti pedal.
• Bọtini BLEND: Adjusts the mix between your dry (unaffected) signal and the wet (filtered) signal. Turn clockwise for more filtered sound, counter-clockwise for more dry signal.
• RESONANCE Knob: Controls the Q or peak of the filter. Higher settings create a more pronounced, resonant filter sweep.
• KỌRỌ RATE: Sets the speed of the filter modulation. This can also be controlled by the TAP footswitch.
• RANGE Knob: Determines the frequency range over which the filter modulates. Turn clockwise for a wider sweep, counter-clockwise for a narrower sweep.

Yipada Yipada:

• EXP MODE Switch: Selects the parameter controlled by an external expression pedal or CV source.
  • RANGE: Expression pedal controls the filter's frequency range.
  • Oṣuwọn: Expression pedal controls the modulation rate.
  • ÀYỌ: Expression pedal controls the filter's center frequency.
• TAP DIVIDE Switch: When using the TAP footswitch to set the modulation rate, this switch divides the tapped tempo into different rhythmic values.
  • Quarter Note: Modulation rate matches the tapped tempo.
  • Dotted Eighth Note: Modulation rate is a dotted eighth note of the tapped tempo.
  • Triplet: Modulation rate is a triplet of the tapped tempo.
• SHAPE Switch: Selects the waveform shape of the internal oscillator that modulates the filter.
  • Onigun mẹta: Smooth, symmetrical modulation.
  • Rising Saw-tooth: Rapid rise, slow fall modulation.
  • Falling Saw-tooth: Slow rise, rapid fall modulation.

Awọn ẹlẹsẹ:

• TAP Ẹsẹ ẹlẹsẹ: Tap this footswitch two or more times to set the modulation rate. The rate will synchronize to your tapped tempo, adjusted by the TAP DIVIDE switch.
• BYPASSWWICH Footswitch: Toggles the effect on and off. When the effect is on, the LED indicator will illuminate.

Image: The Blurst! pedal with input and output cables connected, ready for operation.

Itoju

To ensure the longevity and optimal performance of your Blurst! pedal:

• Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ìta pedal náà. Yẹra fún àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
• Ibi ipamọ: Tọ́jú pedal náà sí ibi tí ó tutù tí ó sì gbẹ, tí kò sí ibi tí oòrùn lè tàn dé àti ibi tí ó gbóná janjan.
• Rirọpo Batiri: If using a 9V battery, replace it when the LED indicator dims or the pedal's performance degrades. To replace, remove the four screws on the bottom plate and carefully lift the plate. Disconnect the old battery and connect a new 9V battery, then reattach the bottom plate.
• Awọn isopọ: Máa ṣàyẹ̀wò gbogbo ìsopọ̀ okùn náà lẹ́ẹ̀kọ̀ọ̀kan bóyá ó ti bàjẹ́ tàbí ó ti bàjẹ́. Rí i dájú pé àwọn jacks kò ní eruku àti ìdọ̀tí.

Laasigbotitusita

If you encounter issues with your Blurst! pedal, consider the following:

• Ko si Ohun:
  • Ensure all cables are securely connected to the input, output, and power jacks.
  • Verify the power supply is functioning correctly and providing 9V DC (center positive).
  • If using a battery, check if it needs replacement.
  • Test with different cables and a different amplifier/instrument to isolate the problem.
• Ohùn tí kò lágbára tàbí tí kò dára:
  • Ṣayẹwo awọn VOL ati BLAND knob settings.
  • Ensure your instrument's output level is appropriate for the pedal's input.
  • If using a battery, replace it.
• Modulation Not Working:
  • Ṣayẹwo awọn Oṣuwọn bọtini eto.
  • If using the TAP footswitch, ensure you are tapping it consistently and the TAP DIVIDE switch is set as desired.
  • Ṣayẹwo awọn ÌṢẸ́ switch is set to a desired waveform.
• Expression Pedal Not Responding:
  • Ensure the expression pedal is correctly connected to the EXP jaki.
  • Ṣayẹwo awọn EXP MODE switch is set to the desired parameter (RANGE, RATE, or FILTER).
  • Confirm the expression pedal is compatible and functioning correctly.

Awọn pato

Atilẹyin ọja ati Support

Electro-Harmonix products are designed for reliability and performance. For warranty information and technical support, please refer to the official Electro-Harmonix webojula tabi kan si wọn onibara iṣẹ Eka.

O tun le ṣàbẹwò awọn Electro-Harmonix Store on Amazon fun afikun ọja alaye ati oro.