SEVERIN Blender SM 3707 Instruction Manual

Awọn Itọsọna Aabo pataki

Please read these instructions carefully before using the appliance and keep them for future reference. This appliance is intended for household use only.

• Lilo inu ile Nikan: This appliance is designed for indoor use in domestic environments.
• Aabo Itanna: Rii daju pe awọn agbara akọkọ rẹ pọ sitage matches the rating on the appliance's label. Always unplug the appliance from the power outlet when not in use, before cleaning, or before assembling/disassembling parts. Do not handle the plug or appliance with wet hands.
• Yago fun Ibọmi: Never immerse the motor base, power cord, or plug in water or any other liquids.
• Aabo abẹfẹlẹ: The blades are very sharp. Exercise extreme caution when handling the blades, especially during assembly, disassembly, and cleaning.
• Abojuto: Abojuto sunmọ jẹ pataki nigbati eyikeyi ohun elo ba lo nipasẹ tabi sunmọ awọn ọmọde.
• Apejọ to tọ: The appliance will only operate when the pitcher is correctly engaged in the motor base, thanks to its safety cut-out switch. Ensure all parts are securely in place before operation.
• Awọn orisun Ooru: Keep the appliance away from direct heat sources, hot gas, electric burners, or heated ovens.
• Afẹfẹ: Maṣe ṣe idiwọ awọn ṣiṣi eefin.
• Damaged Cord/Plug: Ma ṣe ṣiṣẹ ohun elo eyikeyi pẹlu okun tabi plug ti o bajẹ, tabi lẹhin aiṣe ohun elo tabi ti bajẹ ni eyikeyi ọna. Kan si onibara iṣẹ fun titunṣe.

Ọja Pariview

The SEVERIN Blender SM 3707 is designed for efficient blending of various ingredients. Familiarize yourself with its components before use.

Aworan 1: The SEVERIN Blender SM 3707, fully assembled with its motor base, Tritan pitcher, and lid.

Awọn eroja:

1. Ipilẹ mọto: Contains the motor, control knob, and safety interlock.
2. Tritan Pitcher (1.5 L): Removable, BPA-free plastic pitcher with measurement markings.
3. 4-Arm Stainless Steel Blade Assembly: Located at the bottom of the pitcher for efficient blending.
4. Ideri: Features a refill opening and an integrated measuring cup.
5. Iṣakoso Knob: For selecting speed settings and pulse function.
6. Non-slip Rubber Feet: Fun iduroṣinṣin nigba isẹ.
7. Integrated Cable Winder: Fun ibi ipamọ afinju ti okun agbara.

Ṣeto

Before first use, ensure all packaging materials are removed and clean the removable parts.

1. Yọọ kuro: Carefully remove the blender and all its components from the packaging.
2. Mọ: Wash the Tritan pitcher, lid, and blade assembly in warm, soapy water. Rinse thoroughly and dry completely. The motor base should only be wiped with a damp asọ.
3. Ṣe apejọ Pitcher: Ensure the blade assembly is securely attached to the bottom of the pitcher.
4. Place Pitcher on Base: Position the clean pitcher onto the motor base. Rotate it slightly until it locks securely into place. The safety interlock prevents operation if not correctly seated.
5. So agbara: Pulọọgi okun agbara sinu iṣan itanna to dara.

Awọn ilana Iṣiṣẹ

Follow these steps to operate your SEVERIN Blender SM 3707 safely and effectively.

1. Mura Awọn eroja: Cut solid ingredients into small pieces (approx. 2-3 cm) before placing them into the pitcher. Do not overfill the pitcher beyond the maximum fill line (1.5 L).
2. Add Liquids: For best results, always add some liquid when blending solid ingredients.
3. Ideri to ni aabo: Place the lid firmly onto the pitcher. Ensure the measuring cup is inserted into the refill opening.
4. Yan Iyara: Turn the control knob to the desired speed setting (1 or 2). Speed 1 is for softer ingredients, and Speed 2 is for harder ingredients or faster blending.
5. Iṣẹ́ Ọwọ́: For short bursts of power or to crush ice, turn the control knob to the 'P' (Pulse) setting and hold it. Release to stop.
6. Idapọ: Allow the blender to run until the desired consistency is achieved. Do not operate continuously for more than 1 minute to prevent overheating. Allow a short break between cycles.
7. Fifi Awọn Eroja kun Nigba Idapọ: You can add ingredients through the refill opening in the lid while the blender is operating.
8. Ipari idapọmọra: Once blending is complete, turn the control knob to the '0' (Off) position.
9. Yọọ: Yọọ ohun elo nigbagbogbo kuro ni iṣan agbara lẹhin lilo.
10. Nda: Carefully remove the lid and pour the blended contents.

Aworan 2: The SEVERIN Blender's pitcher removed from the base, demonstrating how to pour blended contents into a glass.

Ninu ati Itọju

Ṣiṣe mimọ nigbagbogbo ṣe idaniloju iṣẹ ṣiṣe ti o dara julọ ati fa igbesi aye idapọpọ rẹ pọ si.

1. Yọọ: Yọọ idapọmọra nigbagbogbo ṣaaju ṣiṣe itọju.
2. Tutu: Remove the pitcher from the motor base. Carefully detach the lid and, if possible, the blade assembly from the pitcher.
3. Clean Pitcher and Lid: Wash the Tritan pitcher, lid, and blade assembly in warm, soapy water. Use a brush to clean around the blades carefully. Rinse thoroughly and dry immediately. These parts are generally dishwasher-safe, but hand washing is recommended for longevity.
4. Ipilẹ mọto mimọ: Mu ese ipilẹ moto pẹlu rirọ, damp Aṣọ. Má ṣe lo àwọn ohun ìfọṣọ tàbí kí o fi omi tẹ ibi tí a fi ń gbá mọ́tò náà mọ́.
5. Awọn abawọn Tagidi: For stubborn stains in the pitcher, fill it with warm water and a drop of dish soap, then run the blender on a low setting for a few seconds. Rinse and dry.
6. Ibi ipamọ: Store the clean and dry blender in a safe place. Utilize the integrated cable winder for tidy cord storage.

Laasigbotitusita

If you encounter issues with your blender, refer to the following common problems and solutions.

Awọn pato

Technical details for the SEVERIN Blender SM 3707.

Atilẹyin ọja ati Support

Your SEVERIN Blender SM 3707 comes with a 2-odun olupese ká atilẹyin ọja, reflecting German quality standards.

For warranty claims, technical support, or spare parts inquiries, please contact your local SEVERIN customer service or refer to the official SEVERIN website for contact information. Please have your model number (SM 3707) and proof of purchase ready when contacting support.

You can visit the official Severin store for more information: Ile Itaja Ami Severin