1. Ifihan
O ṣeun fun riraasing the beFree Sound BFS-22 2.1 Channel Bluetooth Speaker System. This manual provides important information regarding the setup, operation, and maintenance of your new speaker system. Please read this manual thoroughly before using the product to ensure proper function and to maximize your listening experience.
2. Alaye Aabo pataki
- Aabo Itanna: To reduce the risk of electric shock, do not open the speaker cabinet. Refer all servicing to qualified service personnel.
- Orisun Agbara: Rii daju pe orisun agbara baamu voltage requirements specified on the unit (AC 110V/60Hz).
- Ibi: Place the unit on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with excessive moisture or dust.
- Afẹfẹ: Do not block any ventilation openings. Proper ventilation is essential for preventing overheating.
- Ninu: Yọọ kuro lati inu iṣan agbara ṣaaju ṣiṣe mimọ. Lo asọ asọ ti o gbẹ. Maṣe lo awọn olutọpa olomi tabi awọn ẹrọ aerosol.
- Awọn batiri: The remote control requires 2 AAA batteries. Ensure correct polarity when inserting batteries. Do not mix old and new batteries.
3. Package Awọn akoonu
Jọwọ ṣayẹwo pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:
- 1 x Ẹ̀rọ Subwoofer Àkọ́kọ́
- Àwọn Agbọrọsọ Satẹlaiti 2 x
- 1 x Isakoṣo latọna jijin
- 1 x Itọsọna olumulo (iwe yii)
- 1 x Audio Cable (RCA to 3.5mm or RCA to RCA, depending on model variant)
- Okun eriali FM 1 x
4. Ọja Ipariview
4.1 Main Unit (Subwoofer)
The main unit houses the amplifier and subwoofer, along with all control interfaces and input/output ports.
Figure 1: Front panel of the main unit with controls.
Front Panel Controls and Ports:
- Bọtini Agbara / Ipo: Press to switch between modes (Bluetooth, USB, SD, FM, AUX). Long press to power on/off.
- Bọ́tìnnì Ṣíṣe/Sánu duro: Mu ṣiṣẹ tabi da idaduro ṣiṣiṣẹsẹhin ohun.
- Bọ́tìnì Ìsàlẹ̀/Ìtẹ̀síwájú: Tẹ kukuru fun orin/ibudo ti tẹlẹ. Tẹ gun lati dinku iwọn didun.
- Bọ́tìnì Tókàn/Ìgbéga Ìwọ̀n: Tẹ kukuru fun orin/ibudo ti o tẹle. Tẹ gun lati mu iwọn didun pọ si.
- Iho Kaadi SD/MMC: Insert SD or MMC cards for audio playback.
- Ibudo USB: Fi awọn awakọ filasi USB sii fun ṣiṣiṣẹsẹhin ohun.
- Knob Treble: Ṣe atunṣe iṣẹjade ohun igbohunsafẹfẹ giga-giga.
- Knob Bass: Ṣe atunṣe iṣelọpọ ohun-igbohunsafẹfẹ kekere.
Figure 2: Rear panel of the main unit with connections.
Awọn Isopọ Panel Ihin:
- FM ANT: Connect the provided FM antenna for radio reception.
- ÀWỌN ÌṢẸ̀ṢẸ̀ (L/R): Connect the satellite speakers here.
- INPUT (L/R): Connect external audio sources (e.g., TV, DVD player) using RCA cables.
- AC IN: So okun agbara pọ si iṣan ogiri.
- AGBARA Yipada: Main power on/off switch for the unit.
4.2 Awọn agbọrọsọ Satẹlaiti
The two satellite speakers provide stereo sound and connect to the main subwoofer unit.
Figure 3: One of the satellite speakers.
4.3 Iṣakoso latọna jijin
The remote control allows convenient operation of the speaker system from a distance.
Nọmba 4: Ifilelẹ iṣakoso latọna jijin.
Awọn iṣẹ iṣakoso latọna jijin:
- Bọtini agbara: Yipada ẹyọ naa tan tabi pa.
- USB/SD/FM/AUX/BT Buttons: Direct selection of input modes.
- VOL+/VOL-: Ṣatunṣe iwọn didun oluwa.
- Ti tẹlẹ/Itele: Skips tracks or FM stations.
- Ṣiṣẹ/Daduro: Ó máa ń gbé ohùn sókè tàbí ó máa ń dá dúró.
- EQ: Yiyipo nipasẹ tito oluṣeto.
- DISP: Changes display information (if applicable).
- Tun: Ó tún orin lọwọlọwọ tabi gbogbo awọn orin ṣe.
- TUNE+/TUNE-: Ó ń ṣe àtúnṣe àwọn ìgbòkègbodò rédíò FM pẹ̀lú ọwọ́.
- LATIO: Auto-scans and saves FM radio stations.
- FIPAMỌ: Saves current FM station.
- CH+/CH-: Navigates through saved FM stations.
- Paadi Nọmba (0-9): Direct track selection or FM station input.
- Tun: Resets settings (refer to specific function in manual).
- DÁKÚN: Ó pa ohùn rẹ́ tàbí ó yọ ohùn kúrò.
5. Eto
5.1 Connecting the Satellite Speakers
- Locate the OUTPUT (L/R) ports on the rear panel of the main subwoofer unit.
- Connect the left satellite speaker to the 'L' output port.
- Connect the right satellite speaker to the 'R' output port.
- Position the satellite speakers to the left and right of your listening area for optimal stereo separation.
5.2 So Antenna FM pọ
- Insert the FM antenna cable into the 'FM ANT' port on the rear panel.
- Extend the antenna fully and position it for best reception.
5.3 Connecting External Audio Sources (AUX)
- Use the provided audio cable (or a compatible RCA cable) to connect your external device (e.g., TV, smartphone, DVD player) to the 'INPUT (L/R)' ports on the rear panel of the main unit.
- Ensure the left and right channels are connected correctly.
5.4 Asopọ agbara
- Ensure the POWER SWITCH on the rear panel is in the 'OFF' position.
- Connect the power cord to the 'AC IN' port on the rear panel.
- Plug the other end of the power cord into a standard AC 110V/60Hz wall outlet.
Figure 5: The complete BFS-22 speaker system.
6. Awọn ilana Iṣiṣẹ
6.1 Titan / Pa a
- Flip the POWER SWITCH on the rear panel to the 'ON' position.
- Press and hold the Power/Mode button on the front panel or the Power button on the remote control to turn the unit on.
- To turn off, press and hold the Power/Mode button on the front panel or the Power button on the remote control. For complete power disconnection, turn off the POWER SWITCH on the rear.
6.2 Aṣayan ipo
Press the Power/Mode button on the front panel or the corresponding mode button (USB, SD, FM, AUX, BT) on the remote control to cycle through the available input modes: Bluetooth, USB, SD, FM Radio, and AUX Input.
6.3 Bluetooth Isẹ
- Switch the speaker system to Bluetooth mode (the display will show 'BT').
- Mu Bluetooth ṣiṣẹ lori ẹrọ alagbeka rẹ (foonuiyara, tabulẹti, ati bẹbẹ lọ).
- Wa fun Bluetooth devices and select 'BFS-22' from the list.
- Once paired, you can play audio from your device through the speaker system.
- Use the Play/Pause, Previous, and Next buttons on the unit or remote to control playback.
6.4 USB / SD Kaadi Sisisẹsẹhin
- Insert a USB flash drive into the USB port or an SD/MMC card into the SD/MMC card slot.
- Eto naa yoo yipada laifọwọyi si ipo USB tabi SD ki o si bẹrẹ si mu ohun afetigbọ ti o baamu ṣiṣẹ files. If not, manually select the mode.
- Use the Play/Pause, Previous, and Next buttons on the unit or remote to control playback.
6.5 FM Radio isẹ
- Switch the speaker system to FM mode.
- Ṣiṣayẹwo Aifọwọyi: Press the 'AUTO' button on the remote control to automatically scan and save available FM stations.
- Itọsọna Afowoyi: Use the 'TUNE+' or 'TUNE-' buttons on the remote to manually adjust the frequency.
- Lilọ kiri ibudo: Use the 'CH+' or 'CH-' buttons on the remote to cycle through saved stations.
6.6 Volume, Treble, and Bass Adjustment
- Iwọn didun: Use the 'VOL+' and 'VOL-' buttons on the front panel or remote control to adjust the overall volume.
- Tirẹbu: Rotate the 'TREBLE' knob on the front panel to increase or decrease high-frequency sounds.
- Bass: Rotate the 'BASS' knob on the front panel to increase or decrease low-frequency sounds.
7. Itọju
- Ninu: Always unplug the unit before cleaning. Use a soft, dry, lint-free cloth to wipe the surfaces. Do not use abrasive cleaners, waxes, or solvents.
- Ibi ipamọ: Tí a kò bá lo ẹ̀rọ náà fún ìgbà pípẹ́, yọ ọ́ kúrò nínú ẹ̀rọ agbára kí o sì tọ́jú rẹ̀ sí ibi tí ó tutù tí ó sì gbẹ.
- Afẹfẹ: Ensure that the ventilation openings on the unit are not blocked by dust or debris.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Power cord not connected; Rear power switch off; Wall outlet no power | Check power cord connection; Turn on rear power switch; Test wall outlet with another device |
| Ko si ohun | Volume too low; Mute activated; Incorrect input mode; Loose audio cables; Satellite speakers not connected | Increase volume; Deactivate mute; Select correct input mode; Check all audio cable connections; Ensure satellite speakers are connected to OUTPUT ports |
| Sisopọ Bluetooth kuna | Speaker not in Bluetooth mode; Device Bluetooth off; Speaker too far from device | Switch speaker to BT mode; Enable Bluetooth on your device; Move device closer to speaker (within 10 meters) |
| USB/SD ko dun | Incorrect mode; Incompatible file format; Corrupted USB/SD card | Select USB/SD mode; Ensure files are MP3 or WMA format; Try another USB/SD card |
| Gbigba FM ti ko dara | FM antenna not connected or poorly positioned; Weak signal | Connect and adjust FM antenna position; Try auto-scan or manual tuning |
| Isakoṣo latọna jijin ko ṣiṣẹ | Batteries depleted or incorrectly inserted; Obstruction between remote and unit; Remote too far | Replace batteries (2 AAA); Ensure clear line of sight; Move closer to the unit |
9. Awọn pato
- Awoṣe: BFS-22
- Irú Agbọrọsọ: 2.1 Channel Bluetooth Speaker System
- Agbara Ijade: 10W (Subwoofer) + 5W x 2 (Satellites)
- Idahun Igbohunsafẹfẹ: 40Hz - 20KHz
- Iyapa: ≥50dB
- Ipin S/N: ≥75dB
- Iwọn Agbọrọsọ: 4-inch amplifier x1, 2.5-inch speakers x2
- Asopọmọra: Bluetooth, USB, SD Card, FM Radio, AUX Input (RCA)
- Orisun Agbara: Corded Electric (AC 110V/60Hz)
- Awọn batiri Iṣakoso Latọna jijin: 2 x AAA (ko si)
- Awọn iwọn ọja: 14.15 x 10 x 6.3 inches (Ẹka Akọkọ)
- Ìwọ̀n Nkan: 6.3 iwon
10. Atilẹyin ọja ati Support
This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your purchase or contact beFree Sound customer support. If you encounter any issues or have questions not covered in this manual, please contact our customer service department for assistance.
Olupese: beFree Ohun
