1. Ifihan
The AcuRite 00256M Portable Anemometer is a versatile device designed to provide essential environmental readings. It measures real-time wind speed, temperature, humidity, and altitude, along with calculated values like wind chill and heat index. This manual will guide you through the setup, operation, and maintenance of your device to ensure optimal performance.
2. Package Awọn akoonu
- AcuRite 00256M Portable Anemometer
- Ilana itọnisọna
3. Eto
3.1 Fifi sori batiri
The device requires 3 AAA batteries (not included).
- Wa awọn yara batiri lori pada ti awọn kuro.
- Lo screwdriver ori Phillips kekere kan lati ṣii ideri batiri naa.
- Fi awọn batiri AAA meji sii, ki o rii daju pe polarity ti o tọ (+/-).
- Rọpo ideri batiri ki o ni aabo pẹlu dabaru.
3.2 Ibẹrẹ Agbara-On
Press the red power button once to turn on the device. The LCD display will illuminate.
4. Awọn ilana Iṣiṣẹ
4.1 Agbara Tan / Pa
Press the red power button once to turn the unit on. Press it again to turn it off.
4.2 Unit Selection (Wind Speed)
With the device on, press the UNIT bọtini lati yiyi nipasẹ awọn iwọn iyara afẹfẹ ti o wa:
- MPH (Miles Per Hour)
- KM/H (Kilometers Per Hour)
- Awọn sorapo
- M/S (Meters Per Second)
- FT/MIN (Feet Per Minute)
4.3 Yiyan ẹyọ kan (Iwọn otutu)
Tẹ awọn °F/°C button to switch between Fahrenheit and Celsius temperature readings.
4.4 Backlight and Inspection Light
Tẹ awọn gilobu ina button to activate or deactivate the LCD backlight. This also activates the integrated inspection light for improved visibility in dark areas.
4.5 Max/Min/Avg Functions
The device can record maximum, minimum, and average readings during a measurement session:
- Tẹ MAX/MIN to display the maximum recorded wind speed.
- Tẹ MAX/MIN again to display the minimum recorded wind speed.
- Tẹ AVG to display the average wind speed.
- These values will hold in place until reset or the device is powered off.
4.6 Extendable Design
The anemometer features an extendable design, allowing the wind speed sensor to be positioned in hard-to-reach places, such as air ducts, for more accurate measurements. Gently pull the sensor head upwards to extend it.
5. Ṣiṣe Awọn wiwọn
5.1 Wind Speed Measurement
Hold the anemometer so that the wind flows directly into the back of the fan (indicated by an arrow on the housing). Ensure the fan spins smoothly and freely for accurate readings. The current wind speed will be displayed on the LCD, with updates every 1 second.
5.2 Temperature and Humidity Measurement
The device continuously updates temperature and humidity readings every 30 seconds. High and low records for these values are maintained and displayed on the screen.
5.3 Altitude, Wind Chill, and Heat Index
The anemometer also provides readings for altitude and automatically calculates wind chill and heat index based on the measured environmental data.
6. Awọn pato
| Brand | AcuRite |
| Nọmba awoṣe | 00256M |
| Niyanju Lilo | Altitude, Heat Index, Humidity, Temperature, Wind Chill, Wind Speed |
| Orisun agbara | Agbara Batiri (3x AAA, ko si) |
| Pataki Ẹya | Itaniji |
| Ohun elo | Ṣiṣu |
| Àwọ̀ | Dudu |
| Yiye iwọn otutu | 1 °C |
| Afẹfẹ Iyara Ibiti | 0 to 60 mph, 0 to 97 km/H, 0 to 52 knots, 0 to 27 M/s, 0 to 1990 ft/min |
| Iwọn otutu | -40°F si 158°F (-40°C si 70°C) |
| Ibiti ọriniinitutu | 1% si 99% |
| Ọja Mefa | 0.78 x 2.5 x 7.2 inches |
| Iwọn Nkan | 5.4 iwon |
| Ifihan Iru | LCD |
7. Itọju
- Jeki ẹrọ naa mọ ki o gbẹ.
- Avoid exposing the device to extreme temperatures or humidity for prolonged periods.
- Rọpo awọn batiri nigbati itọka batiri kekere ba han loju iboju.
- Handle the wind speed sensor (fan) with care to prevent damage.
8. Laasigbotitusita
8.1 Awọn kika ti ko pe
- Ensure the wind speed sensor is free from obstructions and spins smoothly.
- Verify the device is held correctly, allowing wind to flow directly into the sensor.
- Ṣayẹwo awọn ipele batiri.
8.2 Ifihan Ko Ṣiṣẹ
- Ṣàyẹ̀wò fífi bátìrì sílẹ̀ kí o sì rí i dájú pé àwọn bátìrì náà kò tán.
- Tẹ bọtini agbara ṣinṣin.
9. Atilẹyin ọja ati Support
This product comes with a 1-year limited warranty. For detailed warranty information or support, please visit the official AcuRite webojula tabi olubasọrọ onibara iṣẹ.
10. Ọja Visuals ati awọn ifihan
10.1 ọja Images
olusin 1: Iwaju view of the AcuRite 00256M Portable Anemometer.
Figure 2: Key features including the inspection light, LCD backlight, and extendable arm.
Figure 3: Anemometer in use, measuring wind speed for drone operation.
Figure 4: The anemometer with its extendable arm, useful for measuring in confined or elevated spaces.
olusin 5: Apa view of the device, highlighting the control buttons.
olusin 6: Pada view of the anemometer, showing the battery compartment and model information.
Figure 7: Anemometer in use on a boat, demonstrating its portability for outdoor activities.
10.2 Osise Video ọja
Fidio 1: Ọja osise ti pariview and demonstration of the AcuRite 00256M Portable Anemometer with Flashlight.
