1. Ifihan
This manual provides essential information for the safe installation, operation, and maintenance of your Lithonia Lighting BLT Series 2x4 Low Profile LED Troffer Light. Please read these instructions thoroughly before installation and retain them for future reference.
The BLT Series LED Troffer is designed to deliver clean, cool white illumination (4000K) and reliable performance in drop ceilings. Its center-basket style with a curved, ribbed diffuser provides 4000 lumens of uniform light, suitable for various indoor environments such as offices, classrooms, and corridors. The slim 2-3/8 inch depth facilitates installation in restrictive plenum spaces.
2. Alaye Aabo
IKILO: Ewu ti ina-mọnamọna. Ge asopọ agbara ni fiusi tabi fifọ Circuit ṣaaju fifi sori ẹrọ tabi iṣẹ.
- All electrical connections must be in accordance with local codes and the National Electric Code (NEC).
- If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Do not install this fixture in wet locations. It is rated for damp awọn ipo.
- Rí i dájú pé a ti fìdí ẹ̀rọ náà múlẹ̀ dáadáa kí ó má baà léwu fún ewu iná mànàmáná.
- Ma ṣe mu imuduro pẹlu ọwọ tutu.
- Daju pe awọn ipese voltage is compatible with the fixture's requirements (MVOLT 120-277V).
3. Package Awọn akoonu
Package naa pẹlu awọn paati wọnyi:
- 1 x LED Troffer Light Fixture
Note: Additional mounting hardware may be required depending on the installation surface and is not included.
4. Ọja Ipariview
5. Fifi sori ẹrọ ati Oṣo
The BLT Series LED Troffer Light is designed for easy installation in standard drop ceilings.
- Mura agbegbe fifi sori ẹrọ: Ensure power is disconnected at the circuit breaker. Clear the ceiling grid area where the fixture will be installed.
- Position the Fixture: The fixture's shallow depth (2-3/8 inches) allows for installation in restrictive plenum settings. Carefully lift the fixture into the ceiling grid opening.
- Ṣe aabo Ohun elo naa: The end plates of the fixture contain integral T-bar clips. Position these clips to securely attach the luminaire to the T-grid system.
- Awọn Isopọ Itanna: Connect the fixture's wiring to the building's electrical supply (120-277V) according to local electrical codes. Ensure proper grounding. If dimming functionality is desired, connect the 0-10V dimming wires to a compatible dimming driver.
- Iṣiṣẹ Idanwo: Once all connections are secure and the fixture is properly mounted, restore power and test the light's functionality.
Video 5.1: Demonstration of the Lithonia Lighting BLT Series Low Profile LED Drop in Ceiling Light in an office setting, showcasing its illumination and appearance.
6. Isẹ
The Lithonia Lighting BLT Series LED Troffer Light operates by connecting to a standard electrical circuit. Once installed and powered, the light will illuminate.
- Titan/Pa Iṣakoso: The light is controlled via a standard wall switch connected to the electrical circuit.
- Išẹ Dimming: This fixture is equipped with a generic 0-10 volt dimming driver, allowing it to dim down to 10% of its full brightness. To utilize this feature, the fixture must be connected to a compatible 0-10V dimmer switch (sold separately).
7. Itọju
The BLT Series LED Troffer Light requires minimal maintenance.
- Ninu: Ensure power is disconnected before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces of the fixture. Avoid abrasive cleaners or solvents, as these can damage the finish and diffuser.
- LED Longevity: The long-life LEDs are rated for 80% lumen maintenance at 60,000 hours, meaning they are designed for extended operation without requiring frequent replacement.
8. Laasigbotitusita
If you experience issues with your LED Troffer Light, refer to the following common troubleshooting steps:
- Imọlẹ ko tan:
- Ṣàyẹ̀wò ẹ̀rọ ìdènà láti rí i dájú pé a ti pèsè agbára sí ẹ̀rọ ìdènà náà.
- Verify all electrical connections are secure and correctly wired.
- Rí i dájú pé ìyípadà ògiri wà ní ipò 'ON'.
- Ina tan tabi di didin lairotẹlẹ:
- Confirm the fixture is connected to a compatible 0-10V dimmer if dimming is intended. Incompatible dimmers can cause flickering.
- Ṣayẹwo awọn asopọ onirin alaimuṣinṣin.
- Reduced light output:
- Ensure the diffuser is clean and free from dust or debris.
- Verify the dimmer setting is not set too low, if applicable.
Tí àwọn ìgbésẹ̀ wọ̀nyí kò bá yanjú ìṣòro náà, kan si ìrànlọ́wọ́ oníbàárà.
9. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | Imọlẹ Lithonia |
| Orukọ awoṣe | BLT jara |
| Nọmba apakan | 2BLT4 40L ADP LP840 |
| Ọja Mefa | 47.75"L x 23.75"W x 2.38"H |
| Iwọn Nkan | 17 iwon |
| Imọlẹ Orisun Orisun | LED |
| Iwọn otutu awọ | 4000 Kelvin (Cool White) |
| Imọlẹ | 4000 Lumens |
| Wattage | 34 watt |
| Voltage | 120-277 Volts (MVOLT) |
| Dimmable | Yes (0-10V dimming to 10%) |
| Iru fifi sori ẹrọ | Recessed (Drop Ceiling) |
| Ohun elo | Alloy Steel (Housing) |
| Ohun elo iboji | Akiriliki |
| Pari Iru | Ti a bo lulú |
| inu ile / ita gbangba Lilo | Ninu ile |
| Omi Resistance Ipele | Ohun tí kò lè dènà omi (Damp A ṣe ìdíyelé ibi tí a wà) |
| Awọn iwe-ẹri | CSA Certified, IC Rated |
10. Atilẹyin ọja
This Lithonia Lighting BLT Series LED Troffer Light is backed by a 7-year limited warranty. For detailed warranty terms and conditions, please refer to the official Lithonia Lighting warranty documentation or contact customer support.
11. Onibara Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Lithonia Lighting customer support. Refer to the product packaging or the official Lithonia Lighting webAaye fun lọwọlọwọ alaye olubasọrọ.
