AQUA CONTROL C4200 Watering Programmer User Manual

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AQUA CONTROL C4200 Watering Programmer. Designed for ease of use, this device automates your garden watering, ensuring efficient irrigation. Please read this manual thoroughly before first use to ensure proper function and longevity of the product.

Alaye Aabo

• Ensure the device is securely attached to a standard 3/4" tap connection to prevent leaks.
• Do not expose the programmer to extreme temperatures or direct sunlight for prolonged periods, as this may affect performance and durability.
• Lo iru batiri ti a sọ tẹlẹ nikan (awọn batiri AAA meji). Rii daju pe o pe polarity nigbati o ba n fi awọn batiri sii.
• Remove batteries if the device will not be used for an extended period, especially during winter months, to prevent corrosion.
• Jeki kuro ni arọwọto awọn ọmọde.
• Do not disassemble or attempt to repair the unit yourself. Contact customer support for assistance.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• AQUA CONTROL C4200 Watering Programmer Unit
• Afowoyi Olumulo (iwe-ipamọ yii)
• Awọn batiri 2 x AAA (ti fi sii tẹlẹ tabi pẹlu lọtọ)

Ọja Pariview

The AQUA CONTROL C4200 is a compact and efficient watering programmer. Its main components include:

• Asopọmọ-iwọle: Top connection for attaching to a water tap (3/4" RH connection).
• Asopọmọra iṣan: Bottom connection for attaching a garden hose or irrigation system.
• Iṣakoso Iṣakoso: Front-facing dial for selecting watering programs and settings.
• Atọka LED: Provides visual feedback on the program status.
• Abala Batiri: Located on the back, houses 2 AAA batteries.

olusin 1: Iwaju view of the AQUA CONTROL C4200 Watering Programmer, showing the blue control dial and white body.

olusin 2: Angled view of the AQUA CONTROL C4200, highlighting its compact design and connection points.

Ṣeto

1. Fi Awọn batiri sii:

   Locate the battery compartment on the back of the unit. Open the cover and insert 2 AAA batteries, ensuring correct polarity (+/-). Close the battery cover securely. The device requires 2 AAA batteries, which are included.
2. Sopọ si Fọwọ ba:

   Screw the inlet connector (top part) of the programmer onto your outdoor tap. The connection is designed for a standard 3/4" tap. Ensure it is tightened by hand to prevent leaks, but do not overtighten.

   

   Figure 3: The AQUA CONTROL C4200 programmer securely attached to an outdoor water tap.

3. Connect Hose/Irrigation System:

   Attach your garden hose or irrigation system to the outlet connector (bottom part) of the programmer. Ensure this connection is also secure.
4. Tan Ipese Omi:

   Slowly turn on the water tap to full pressure. The programmer is now ready for programming.

Awọn ilana Iṣiṣẹ

The AQUA CONTROL C4200 features easy programming with a single button and a control dial. It comes with 12 predefined watering programs.

Selecting a Watering Program

1. The control dial allows you to select from various watering durations and frequencies. Rotate the dial to align the desired program with the indicator mark.
2. The dial includes settings for watering duration (e.g., 15 min, 30 min, 60 min) and frequency (e.g., every 2 hours, 12 hours, 24 hours, 48 hours, or weekly).
3. Once a program is selected, the LED indicator will confirm the selection and the program will begin according to its schedule.
4. To turn the programmer OFF, rotate the dial to the "OFF" position.

olusin 4: Isunmọ view of the control dial, showing the various predefined watering programs and the LED indicator.

Iṣẹ idaduro

The "Delay" function allows you to postpone the start of the selected watering program. This is useful if it's raining or if you need to perform manual watering.

• To activate the delay function, press and hold the single button on the programmer for 3 seconds.
• The LED indicator will signal that the delay function is active. The program will resume after the delay period, which is typically a fixed duration (e.g., 24 hours) or until the next scheduled watering cycle, depending on the model's specific implementation.

Itoju

• Ninu: Wipe the exterior of the programmer with a damp asọ. Ma ṣe lo abrasive ose tabi epo.
• Fifọ́ àlẹ̀: Periodically check the filter washer located in the inlet connector for debris. Clean it under running water if necessary to ensure proper water flow.
• Rirọpo Batiri: Replace batteries when the LED indicator shows a low battery warning or if the unit stops functioning. Always use fresh AAA alkaline batteries.
• Ibi ipamọ igba otutu: During winter months or periods of freezing temperatures, disconnect the programmer from the tap and store it indoors in a dry, frost-free location. Remove batteries before storage.

Laasigbotitusita

Awọn pato

Figure 5: Product packaging highlighting key features and specifications.

Figure 6: Back of the product packaging, showing connection details and a QR code for additional information. The QR code links to http://bit.ly/Click4200.

Atilẹyin ọja ati Support

AQUA CONTROL products are manufactured to high-quality standards. For any issues or support inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: Aqua Control

For more information, you may visit the official AQUA CONTROL website or refer to the resources provided on the product packaging, such as the link: http://bit.ly/Click4200.