Ọja Pariview
The Elesa 408534 Stainless Steel Leveling Element is designed to provide stable and adjustable support for various industrial applications. Its robust construction ensures durability and resistance to environmental factors. The unique design of the base and the threaded stem allows for precise height adjustment and secure positioning.
Figure 1: Elesa 408534 Stainless Steel Leveling Element. This image displays the complete leveling element, highlighting its threaded stem, hexagonal adjustment nut, and the sturdy base with an integrated non-slip disk.
Awọn ẹya pataki:
- AISI 304 Stainless Steel Base and Nut: Provides excellent corrosion resistance and strength.
- AISI 303 Stainless Steel Threaded Stem: Ensures durability and smooth adjustment.
- Stainless Steel Set Screw: Ni aabo clamped by glue for integral component stability.
- NBR Rubber (PERBUNAN) No-Slip Disk: Hardness from 80 to 85 Shore A, black color, prevents slipping and protects surfaces.
- M16 Thread Size: Standard threading for compatibility.
- Integrated Adhesion: Perfect adhesion between rubber and metal surface of the base cavity, preventing infiltration of substances.
- Dual Adjustment: Stem can be adjusted via hexagon socket at the upper end or spanner flats at the lower end.
Eto ati fifi sori
Proper installation of the Elesa 408534 Leveling Element is crucial for optimal performance and stability. Follow these steps to ensure correct setup:
- Mura Ilẹ Iṣagbesori: Ensure the surface where the leveling element will be installed is clean, flat, and capable of supporting the intended load.
- Thread the Element: Screw the threaded stem of the leveling element into the corresponding threaded hole on the equipment or structure to be leveled. Ensure it is threaded securely.
- Àtúnṣe Àkọ́kọ́: Loosely adjust the height of the element by rotating the base or the threaded stem until it makes contact with the ground or supporting surface.
- Atunse Ti o dara: Use a spanner on the flats at the lower end of the stem or an appropriate hexagon key in the socket at the upper end to precisely adjust the height. Rotate clockwise to lower and counter-clockwise to raise.
- Ṣe aabo Ipo naa: Once the desired height and level are achieved, tighten the nut against the equipment's mounting surface to lock the leveling element in place. This prevents unwanted rotation or loosening during operation.
- Jẹrisi Iduroṣinṣin: After installation and adjustment, gently test the stability of the equipment to ensure it is level and securely supported by all leveling elements.
Note: For applications requiring maximum static load, ensure the mounting surface and the equipment's structure are robust enough to handle the specified load capacity of 4256 lb.
Awọn ilana Iṣiṣẹ
The Elesa 408534 Leveling Element is designed for static load applications where precise leveling and stability are required. Once installed, its operation primarily involves maintaining the desired level and ensuring the integrity of the setup.
- Pipin fifuye: Ensure that the load is evenly distributed across all installed leveling elements to prevent excessive stress on any single point.
- Periodic Level Check: For critical applications, periodically check the level of the equipment using a spirit level or similar tool. Readjust if necessary.
- Adjustment for Relocation: If equipment needs to be moved, loosen the locking nuts, adjust the leveling elements as needed for the new location, and then re-tighten the nuts.
- Awọn ero Ayika: While the stainless steel construction offers high corrosion resistance, avoid prolonged exposure to highly corrosive chemicals or extreme temperatures beyond typical industrial environments to preserve material integrity.
Itoju
Regular maintenance helps prolong the lifespan and ensures the continued performance of your Elesa 408534 Leveling Elements.
- Ninu: Clean the leveling elements periodically to remove dust, dirt, and debris. Use a soft cloth and a mild cleaning solution. Avoid abrasive cleaners or harsh chemicals that could damage the stainless steel finish or the rubber disk.
- Ayewo: Regularly inspect the threaded stem, nut, and base for any signs of wear, damage, or corrosion. Check the integrity of the non-slip rubber disk for cracks or degradation.
- Ṣayẹwo wiwọ: Verify that the locking nuts remain tight and secure. Vibrations or heavy loads over time can sometimes cause nuts to loosen. Re-tighten if necessary.
- Lubrication: The threaded stem does not typically require lubrication for normal operation. However, if adjustment becomes stiff, a small amount of appropriate lubricant can be applied to the threads, ensuring it does not interfere with the non-slip disk or load bearing.
Laasigbotitusita
This section addresses common issues that may arise with the Elesa 408534 Leveling Element and provides solutions.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ohun elo jẹ riru tabi wobbles. |
|
|
| Iṣoro lati ṣatunṣe iga. |
|
|
| Corrosion or discoloration on metal parts. |
|
|
Awọn pato
Detailed technical specifications for the Elesa 408534 Stainless Steel Leveling Element:
| Iwa | Iye |
|---|---|
| Nọmba awoṣe | 408534 |
| Ohun elo mimọ | AISI 304 Irin alagbara |
| Ohun elo Eso | AISI 304 Irin alagbara |
| Threaded Stem Material | AISI 303 Irin alagbara |
| Iwọn Iwọn | M16 |
| Max Aimi fifuye | 4256 lb. |
| No-Slip Disk Material | NBR Rubber (PERBUNAN), 80-85 Shore A hardness, black |
| Lapapọ Opin | 3.15" |
| Overall Height (approx.) | 5.2" |
| Package Mefa | 9 x 9 x 7 inches |
| Iwọn Nkan | 15.36 ounces (per unit, if pack of 4, total weight would be higher) |
| Akọkọ Wa Ọjọ | Oṣu Kẹrin Ọjọ 19, Ọdun 2017 |
Atilẹyin ọja ati Support
For specific warranty information regarding the Elesa 408534 Stainless Steel Leveling Element, please refer to the documentation provided with your purchase or contact Elesa directly. Warranty terms typically cover manufacturing defects and material integrity under normal use conditions.
For technical support, product inquiries, or to report any issues, please contact Elesa customer service through their official website or authorized distributors. Provide your product model number (408534) and any relevant purchase details when seeking support.
Elesa Official Webojula: www.elesa.com (This is a placeholder URL, please refer to the actual manufacturer's website for accurate contact information.)
