Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Ifihan

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Alaye Aabo

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Lo okun agbara nikan ti a pese pẹlu itẹwe.
• Má ṣe fi ẹ̀rọ ìtẹ̀wé náà sí omi tàbí ọ̀rinrin tó pọ̀ jù.
• Rii daju pe a gbe itẹwe sori iduro, ipele ipele.
• Yẹra fun idinamọ awọn ṣiṣi atẹgun.
• Disconnect power before cleaning or servicing the printer.
• Do not attempt to open or repair the printer yourself. Refer to qualified service personnel.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Intermec PC43TB01100201 Printer Unit
• US Power Okun
• Itọsọna Ibẹrẹ kiakia (ko si ninu iwe afọwọkọ yii)
• Software/Driver CD (may vary by package)

4. Eto

4.1 Ṣiṣii ati Gbe

1. Fara yọọ itẹwe kuro ninu apoti rẹ.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Nsopọ Agbara

1. Connect the supplied US power cord to the printer's power input.
2. Pulọọgi opin miiran ti okun agbara sinu iṣan itanna ti o wa lori ilẹ.

4.3 Nsopọ si Kọmputa kan

The PC43TB01100201 printer supports USB and LAN connectivity.

• Asopọ USB: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• Asopọ LAN: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Ṣii ideri itẹwe.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Pa ideri itẹwe naa.

5. Awọn ilana Iṣiṣẹ

5.1 Titan / Pa a

• Lati Fi agbara: Press the power button located on the printer. The LCD display will illuminate.
• Lati Paarẹ: Press and hold the power button until the printer shuts down.

5.2 Lilo LCD Ifihan

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Titẹ sita

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Ṣí ẹ̀rọ ìṣàpẹẹrẹ tàbí ohun èlò ìṣàpẹẹrẹ àmì rẹ.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Bẹrẹ iṣẹ titẹ.

The printer features a tear-off function for easy label separation after printing.

6. Itọju

6.1 Ninu itẹwe

Mimọ deede ṣe iranlọwọ lati ṣetọju didara titẹ ati fa igbesi aye itẹwe naa pọ.

• Ori atẹjade: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Roller Platen: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Òde: Pa ode nu pẹlu asọ, damp asọ. Maṣe lo awọn afọmọ abrasive.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Laasigbotitusita

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Itẹwe Ko Dahun:
  • Ṣayẹwo awọn asopọ agbara.
  • Verify USB or LAN cable connections.
  • Tun ẹrọ itẹwe ati kọmputa naa bẹrẹ.
  • Rii daju pe awọn awakọ itẹwe ti fi sori ẹrọ daradara.
• Didara Titẹjade Ko dara:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Àwọn Àmì Tí Kò Fúnni Ní Oúnjẹ Tọ́:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Awọn pato

9. Atilẹyin ọja ati Support

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Olupese: Intermec
• Nọmba awoṣe: PC43TB01100201
• For technical assistance, visit the official Intermec support webojula tabi kan si wọn onibara iṣẹ.