Legrand 191510 Plexo Recessed Switch User Manual

1. Ifihan

This manual provides essential information for the safe and correct installation, operation, and maintenance of the Legrand 191510 Plexo Recessed Switch. Please read these instructions thoroughly before beginning any work.

1.1 Abo Alaye

• Fifi sori gbọdọ jẹ ṣiṣe nipasẹ onisẹ ina mọnamọna ni ibamu pẹlu gbogbo awọn koodu itanna agbegbe ati ti orilẹ-ede.
• Always disconnect power at the main circuit breaker before installing or servicing the switch.
• Do not use the switch if it appears damaged.
• Rii daju pe ilẹ ti o tọ ni ibi ti o yẹ.
• The switch is designed for recessed installation and offers waterproof protection (IP54).

1.2 Ọja Loriview

The Legrand 191510 Plexo Recessed Switch is a grey, waterproof switch designed for environments requiring protection against dust and water, such as outdoor areas, basements, and garages. It features a robust design for recessed installation and includes a box with upper and lower membranes for pipe inlet up to 25 mm, facilitating a secure and sealed cable entry.

olusin 1: Iwaju view of the Legrand 191510 Plexo Recessed Switch.

2. Awọn ilana fifi sori ẹrọ

2.1 Awọn irinṣẹ ti a beere

• Screwdriver (Phillips ati flathead)
• Waya strippers
• Voltage idanwo
• Drill (if creating a new recess)
• Teepu wiwọn

2.2 Mounting the Switch Box

1. Rí i dájú pé a ti ge agbára kúrò ní ibi tí ẹ̀rọ ìfọ́mọ́ra àkọ́kọ́ wà.
2. Prepare the recess in the wall according to the switch dimensions (approximately 8 x 8 x 5.5 cm).
3. Identify the desired cable entry point(s) on the switch box (upper or lower membrane). Carefully pierce the membrane to allow cable passage.
4. Insert the electrical cables through the prepared membrane(s).
5. Secure the switch box into the recess using appropriate fasteners. The joint joints between the mechanism and the wall facilitate adjustment on various surfaces.

olusin 2: Ẹyìn view of the switch box with cable entry membranes and mounting points.

2.3 Wiring the Switch

1. Strip approximately 13mm of insulation from the ends of the electrical wires.
2. Connect the wires to the appropriate terminals on the switch mechanism. Refer to the wiring diagram usually found on the product or packaging. For a 1-way circuit, connect the live input to one terminal and the switched live output to the other.
3. Rii daju pe gbogbo awọn asopọ wa ni wiwọ ati aabo.

Nọmba 3: Alaye view of the wiring terminals.

2.4 Assembling the Switch Mechanism and Cover

1. Carefully position the wired switch mechanism into the mounted switch box.
2. Ensure the mechanism is seated correctly and securely within the box.

Figure 4: Internal mechanism of the switch.

3. Attach the grey front plate to the switch mechanism, ensuring it clicks into place and forms a tight seal for waterproof protection.

Figure 5: Attaching the front plate to the switch mechanism.

4. Once fully assembled, restore power at the main circuit breaker.

3. Isẹ

3.1 Ipilẹ Iṣẹ-

The Legrand 191510 Plexo Recessed Switch operates as an ON-ON-OFF push-button switch. Pressing the button will toggle the connected electrical circuit between its ON and OFF states. The switch has 3 positions, allowing for flexible control of the connected load.

4. Itọju

4.1 Ninu

To clean the switch, wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or excessive water, as this may damage the finish or compromise the waterproof seal.

4.2 ayewo

Periodically inspect the switch for any signs of damage, wear, or compromise to the waterproof seal. If any damage is observed, disconnect power and have the switch inspected or replaced by a qualified professional.

5. Laasigbotitusita

5.1 wọpọ oran

• Swip kò dáhùn: Check if the main circuit breaker is ON. Verify all wiring connections are secure. If the issue persists, consult a qualified electrician.
• Iṣiṣẹ lainidii: This could indicate a loose connection or internal damage. Disconnect power and have the switch inspected by a professional.
• Gbigbe omi: If water is observed inside the switch or connected enclosure, immediately disconnect power. The waterproof seal may be compromised. The switch must be replaced.

6. Imọ ni pato

7. atilẹyin ọja Information

The Legrand 191510 Plexo Recessed Switch is covered by a standard manufacturer's warranty. For specific details regarding warranty terms, duration, and claims, please refer to the documentation provided with your purchase or visit the official Legrand webojula. Tọju ẹri rira rẹ fun awọn idi atilẹyin ọja.

8. Onibara Support

For further assistance, technical support, or inquiries regarding the Legrand 191510 Plexo Recessed Switch, please contact Legrand customer service. You can find contact information, FAQs, and additional resources on the official Legrand webojula:

www.legrand.us