Ìwé Ìtọ́sọ́nà Olùlò Emomo Recliner Cup HX43HRL-1

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of your Emomo Recliner Cup Holder, Model HX43HRL-1. This cup holder is designed to integrate into recliners and sofas, offering convenient beverage storage with integrated blue LED lighting and touch sensor controls for your recliner's lift mechanism.

Alaye Aabo

Rí i dájú pé gbogbo àwọn ìsopọ̀ agbára wà ní ààbò àti pé a fi wọ́n sí ibi tí ó yẹ láti dènà ewu iná mànàmáná.
Do not expose the cup holder to excessive moisture or liquids beyond its intended use.
Keep children away from the wiring and connectors during installation.
If any damage is observed, discontinue use and contact customer support.

Package Awọn akoonu

Emomo Recliner Cup Holder (Model HX43HRL-1)
Integrated 8-pin connector cable

Note: A control box (Part # JCTBOX014) may be required for dual cup systems or specific recliner models. This item is sold separately.

Ọja Pariview

The Emomo Recliner Cup Holder features an integrated design with touch-sensitive controls and LED illumination. Familiarize yourself with the components:

Oke view of Emomo Recliner Cup Holder with blue LED light and touch controls

olusin 1: Top View of Cup Holder Controls

This image displays the top surface of the Emomo Recliner Cup Holder. The cup holder features a circular design with a blue LED light illuminating the interior rim. Around the rim, there are four touch-sensitive icons: a power symbol (lockout), a light bulb symbol (LIGHT), an upward-pointing hand symbol (OPEN), and a downward-pointing hand symbol (CLOSE). These icons indicate the touch sensor controls for the cup holder's functions and the recliner's lift mechanism.

Apa view of Emomo Recliner Cup Holder with 8-pin connector cable

olusin 2: Apa View with Connector Cable

Aworan yii fihan ẹgbẹ kan view of the Emomo Recliner Cup Holder. The main body of the cup holder is black plastic. Extending from the bottom is a black electrical cable, neatly coiled, terminating in a round, 8-pin male connector. This connector is used to interface with the recliner's power system or a control box.

Imọlẹ LED: Blue LED illuminates the inside of the cup holder.
Awọn iṣakoso Sensọ Fọwọkan:
- Imọlẹ: Activates/deactivates the blue LED light.
- ṢII: Initiates the recliner's lift mechanism to open/recline.
- PADE: Initiates the recliner's lift mechanism to close/return to upright position.
Iṣẹ titiipa: A dedicated button to disable the touch sensors, preventing accidental activation.
8-Pin Asopọ: Standard round connector for power and control signals.

Eto ati fifi sori

Ge asopọ agbara: Before beginning installation, ensure the recliner or sofa is unplugged from its power source to prevent electrical shock.
Locate Installation Point: Identify the designated opening in your recliner or sofa for the cup holder.
Insert Cup Holder: Carefully insert the Emomo Recliner Cup Holder into the opening. Ensure it sits flush with the surface.
Asopọmọra Waya:
- Locate the existing wiring harness or control box in your recliner.
- Connect the 8-pin connector from the cup holder to the corresponding 8-pin port on your recliner's motor or control box (e.g., JCTBOX014). Ensure the connection is firm and secure.
- For dual cup systems, ensure both cup holders are correctly connected to the control box, which then connects to the recliner's motor.
Asopọmọra to ni aabo: Route and secure any loose wiring to prevent interference with moving parts of the recliner.
Atunṣe agbara: Once all connections are secure, plug the recliner back into its power source.
Iṣe idanwo: Test all functions of the cup holder and recliner lift mechanism as described in the "Operating Instructions" section.

Awọn ilana Iṣiṣẹ

The Emomo Recliner Cup Holder features intuitive touch controls:

Activating/Deactivating LED Light:
- Fi ọwọ kan awọn Imọlẹ icon (light bulb symbol) on the cup holder.
- The blue LED light inside the cup holder will turn on or off with each touch.
Operating Recliner Lift Mechanism:
- To recline or open the chair, gently touch and hold the SISI icon (upward-pointing hand symbol). Release when the desired position is reached.
- To close or return the chair to an upright position, gently touch and hold the PADE icon (downward-pointing hand symbol). Release when the desired position is reached.
Using the Lockout Function:
- To prevent accidental activation of the touch sensors, touch the Titiipa icon (power symbol).
- When activated, the other touch sensors (LIGHT, OPEN, CLOSE) will be temporarily disabled.
- Fi ọwọ kan awọn Titiipa icon again to re-enable the touch sensors.

Itoju

Ninu: Lo asọ, damp cloth to wipe the surface of the cup holder. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
Idasonu Olomi: In case of a liquid spill, immediately disconnect power to the recliner. Wipe up the spill and allow the unit to dry completely before reconnecting power.
Ayewo: Lokọọkan ṣayẹwo awọn onirin ati awọn asopọ fun eyikeyi ami ti wọ tabi ibaje.

Laasigbotitusita

Isoro	Owun to le Fa	Ojutu
Imọlẹ LED ko tan.	No power to the recliner. Asopọ alaimuṣinṣin. Lockout function is active.	Ensure recliner is plugged in and power outlet is functional. Ṣàyẹ̀wò asopọ̀ 8-pin fún ìbáramu tó dájú. Deactivate the lockout function by touching the power symbol.
Recliner lift mechanism does not respond.	No power to the recliner. Asopọ alaimuṣinṣin. Lockout function is active. Issue with recliner motor or control box.	Ensure recliner is plugged in and power outlet is functional. Ṣàyẹ̀wò asopọ̀ 8-pin fún ìbáramu tó dájú. Deactivate the lockout function by touching the power symbol. Consult your recliner's manual or contact recliner manufacturer for motor/control box issues.
Touch sensors are unresponsive.	Lockout function is active. Surface is dirty or wet.	Deactivate the lockout function. Clean the touch sensor area with a dry, soft cloth.

Awọn pato

Nọmba awoṣe:	HX43HRL-1
Brand:	Emomo
Awọn iwọn:	4 x 5 x 6 inches (isunmọ)
Ìwúwo:	8 iwon (isunmọ)
Ohun elo:	Ṣiṣu
Àwọ̀:	Dudu
Orisi Asopọmọra:	Round 8-Pin
Awọn ẹya:	Blue LED Lighting, Touch Sensor Controls (Open/Close, Light, Lockout)
Compatible Control Box (Optional):	JCTBOX014 (for dual cup systems)

Alaye atilẹyin ọja

Emomo products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship under normal use. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please contact Emomo customer support.

Onibara Support

If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact Emomo customer support for further assistance.

Please have your product model number (HX43HRL-1) and proof of purchase ready when contacting support.

	eMoMo Remo4 Bluetooth Audio System Afọwọṣe olumulo Itọsọna olumulo fun eMoMo Remo4 Bluetooth Audio System, ṣe alaye awọn ikilọ ailewu, iṣẹ ipilẹ, awọn pato, ati laasigbotitusita.
	eMoMo 39ER (B) Ilana olumulo Atọka olumulo fun paati tabili tabili smart eMoMo 39ER (B), nronu alaye loriview, awọn bọtini, awọn iṣẹ, awọn iṣẹ ipilẹ, awọn ipilẹ ọja, ati laasigbotitusita.
	iTable 3 Olumulo Afowoyi - eMoMo Smart Tabletop Iwe afọwọkọ olumulo ti okeerẹ fun eMoMo iTable3 Smart Tabletop, ṣe alaye awọn iṣẹ rẹ, awọn igbesẹ ṣiṣe, laasigbotitusita, ati awọn ipilẹ ọja. Kọ ẹkọ bii o ṣe le lo gbigba agbara alailowaya, ohun Bluetooth, ati amuṣiṣẹpọ console.
	ICP多功能杯座：安装、操作与规格指南 ICP多功能杯座安装操作指南，包含产品功能介绍、安装步骤、操作说明、技术规格及FCC合规声明，提供无线充电与USB快充。
	CYBEX 2-ni-1 Cup dimu olumulo Itọsọna Awọn itọnisọna ati awọn ikilọ ailewu fun Dimu Cup CYBEX 2-in-1, ni ibamu pẹlu AVI, ZENO, PRIAM, E-PRIAM, ati awọn alarinkiri MIOS. Kọ ẹkọ bi o ṣe le lo daradara ki o so dimu ago naa pọ.
	Àwọn Ìlànà Àkójọpọ̀: Sẹ́ẹ̀tì Sófà Ìjókòó Mẹ́ta Àwọn ìlànà ìtòjọpọ̀ kíkún fún àkójọ sófà onígun mẹ́ta, pẹ̀lú àkójọ àwọn apá kan, àwọn ìmọ̀ràn ìtòjọpọ̀, àti ìtọ́sọ́nà ìgbésẹ̀-sí-ìgbésẹ̀ fún ìtòjọpọ̀ tó rọrùn.

Emomo HX43HRL-1