Ìwé Ìtọ́sọ́nà Olùlò TOZO Q1012 X8tw Drone RC Quadcopter

1. Ifihan

This manual provides detailed instructions for the safe operation and maintenance of your TOZO Q1012 X8tw RC Quadcopter. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury.

Image: The TOZO Q1012 X8tw drone, black in color, with its four propellers extended, viewed from above. The drone features a sleek design with a white stripe down the center.

2. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

Aworan: An loriview of the TOZO Q1012 X8tw drone's package contents, including the drone, remote transmitter, screws, battery, USB charging cable, spare propellers, screwdriver, phone holder, and the operation manual.

• TOZO Q1012 X8tw RC Quadcopter
• Latọna Atagba
• Batiri Drone ti a le gba agbara
• Okun Ngba agbara USB
• Àwọn ohun èlò ìpèsè (àkójọpọ̀ mẹ́rin)
• Screwdriver
• Phone Holder for Transmitter
• Ilana itọnisọna
• Screws (for propeller attachment)

3. Awọn ẹya Ọja

• Apẹrẹ folda: The drone arms can be folded for compact storage and portability.

  Image: Demonstrates the foldable design of the TOZO Q1012 X8tw drone, showing both its compact folded state (122x94x57mm) and its unfolded state (343x313x91mm) with propellers extended.
• Idaduro Giga: Maintains a consistent altitude, simplifying flight control.
• Ipo Aini ori: Eliminates the need to adjust the drone's position before flight, as the forward direction is relative to the pilot.

  Image: Illustrates the Headless Mode feature of the TOZO Q1012 X8tw drone, showing directional arrows indicating that the drone will move relative to the controller's orientation, regardless of the drone's front-facing direction.

• FPV (Ẹni Àkọ́kọ́) View) with WiFi 720P HD Camera: Stream live video to your smartphone via WiFi.
• Gyro Apá 6: Provides stable flight and easy control.
• 3D 360-Degree Flips: Perform aerial stunts with a single button.
• 2.4Ghz 4-Channel Control: Ensures strong signal and precise control.

4. Awọn Itọsọna Aabo

• Ṣiṣẹ́ drone náà ní àwọn ibi tí ó ṣí sílẹ̀, jìnnà sí àwọn ènìyàn, ẹranko, àti àwọn ìdènà.
• Maṣe fo nitosi awọn papa ọkọ ofurufu tabi aaye afẹfẹ ihamọ.
• Yẹra fún fífò nígbà tí afẹ́fẹ́ bá ń fẹ́ tàbí nígbà tí ojú ọjọ́ kò bá dára.
• Pa awọn ika ọwọ ati irun mọ kuro ninu awọn ohun elo ti n yipo.
• Rii daju pe batiri ti gba agbara ni kikun ṣaaju ọkọ ofurufu kọọkan.
• Ṣe abojuto awọn ọmọde lakoko iṣẹ drone.
• Má ṣe yí drone tàbí àwọn èròjà rẹ̀ padà.

5. Eto

5.1 Àkójọpọ̀ Drone

1. Unfold the Arms: Gently extend the four arms of the drone until they lock into position. Refer to the foldable design image in Section 3.
2. Fi sori ẹrọ Propellers: Attach the propellers to the motor shafts, ensuring correct orientation (A and B propellers are typically marked and correspond to specific motor positions). Secure with screws if necessary.
3. Install Landing Gear: Attach the landing gear to the bottom of the drone.

5.2 Batiri sori ati gbigba agbara

1. Batiri Drone ti a gba agbara: Connect the drone battery to the USB charging cable, then plug the USB cable into a USB power source (e.g., computer, USB wall adapter). The indicator light will show charging status and turn off when fully charged.
2. Fi Batiri Drone sori ẹrọ: Open the battery compartment on the drone and insert the fully charged battery. Connect the battery connector to the drone's power port. Close the compartment securely.
3. Fi Awọn Batiri Atagba sori ẹrọ: Open the battery compartment on the remote transmitter and insert 4x AAA batteries (not included), observing polarity. Close the compartment.

5.3 Atagba Loriview

Image: A detailed diagram of the TOZO Q1012 X8tw drone's remote transmitter, labeling various controls such as the LCD display, accelerator/left and right rotatory rocker, front rear left and right rocker, fine-tuning buttons, power switch, light switch, speed toggle, and automatic landing/emergency stop buttons.

• Ifihan LCD: Shows flight information.
• Left Stick (Accelerator/Left & Right Rotatory Rocker): Awọn iṣakoso giga (oke/isalẹ) ati yiyi (osi/ọtun).
• Right Stick (Front Rear Left & Right Rocker): Awọn iṣakoso siwaju / sẹhin ati osi / ọtun ronu.
• Fine Tuning Buttons: Adjust drone drift for stable flight.
• Agbara Yi pada: Yipada atagba tan/pa.
• Yipada Imọlẹ: Controls drone LED lights.
• High/Intermediate/Low Speed Toggle: Yí iyára ọkọ̀ òfurufú padà.
• Automatic Landing Button: Press and hold for 2 seconds to initiate automatic landing.
• Iduro Pajawiri: Press both bottom buttons simultaneously for emergency stop.

6. Awọn ilana Iṣiṣẹ

6.1 Pairing the Drone and Transmitter

1. Gbe drone sori pẹpẹ kan, ipele ipele.
2. Turn on the drone's power switch. The drone's indicator lights will flash.
3. Turn on the transmitter's power switch.
4. Push the left throttle stick (accelerator) fully up, then pull it fully down. The drone lights will stop flashing and remain solid, indicating successful pairing.

6.2 Idiwọn

After pairing, perform a gyroscope calibration for stable flight:

1. Ensure the drone is on a flat surface.
2. Push both control sticks down and to the right simultaneously (as shown in step 3 of the "How to Take Off" image). The drone lights will flash rapidly and then become solid, indicating successful calibration.

6.3 How to Take Off

Image: A six-step visual guide demonstrating the take-off procedure for the TOZO Q1012 X8tw drone, including pushing the throttle up and down for pairing, calibrating by pushing both sticks down-right, unlocking by pushing both sticks down-left, and finally pushing the left stick up to take off.

1. Pipọpọ: Push the throttle lever up (1), then down (2).
2. Iṣatunṣe: Push both control sticks down and to the right (3).
3. Ṣii silẹ: Push both control sticks down and to the left (4). The propellers will start spinning slowly.
4. Bo kuro: Push the left throttle stick up to ascend (6).

6.4 Iṣakoso ofurufu

• Sokale/Sokale: Use the left stick (throttle) up or down.
• Siwaju/Sẹhin: Use the right stick up or down.
• Turn Left/Right (Yaw): Use the left stick left or right.
• Fly Left/Right (Roll): Use the right stick left or right.
• Idaduro Giga: Once the drone reaches a desired altitude, release the left stick, and the drone will attempt to maintain that height.
• Ipo Aini ori: Press the Headless Mode button (refer to transmitter diagram). The drone will orient itself relative to the pilot, regardless of its front direction. Press again to exit.
• 360-Degree Flips: Press the 3D Flip button, then push the right stick in the desired flip direction.

6.5 ibalẹ

• Ibalẹ pẹlu ọwọ: Slowly pull the left throttle stick down until the drone lands.
• Ibalẹ aifọwọyi: Press and hold the automatic landing button on the transmitter for 2 seconds. The drone will descend and land automatically.

6.6 FPV and Camera Operation (via Phone WiFi Direct Control)

Image: Displays two methods of controlling the TOZO Q1012 X8tw drone: via the included transmitter with a phone monitor attached, or directly via phone WiFi control using a compatible iOS/Android app. It also notes that data is stored directly on the phone, eliminating the need for a TF card.

1. Ṣe igbasilẹ Ohun elo: Wa fun the official TOZO drone app on your smartphone's app store (iOS/Android).
2. Sopọ mọ WiFi Drone: Turn on the drone. On your smartphone, go to WiFi settings and connect to the drone's WiFi network (e.g., "TOZO-Q1012-XXXX").
3. Ifilọlẹ App: Open the TOZO drone app. You should see a live FPV feed from the drone's camera.
4. Gba Fídíò sílẹ̀/Ya fọ́tò: Use the controls within the app to start/stop video recording or take still photos. Captured media is stored directly on your phone.

7. Itọju

• Ninu: Use a soft, dry cloth to clean the drone body and camera lens. Do not use harsh chemicals or solvents.
• Rirọpo Propeller: If a propeller is damaged, replace it with a new one from the spare parts. Ensure the correct propeller type (A or B) is installed on the corresponding motor.
• Itọju Batiri: Tọ́jú àwọn bátìrì sí ibi tí ó tutù tí ó sì gbẹ. Má ṣe gba agbára jù tàbí kí o tú u jù.
• Ibi ipamọ: When not in use for extended periods, remove batteries from both the drone and transmitter. Store the drone in a cool, dry environment.

8. Laasigbotitusita

• Drone not responding to transmitter:
  • Ensure both drone and transmitter are powered on.
  • Re-pair the drone and transmitter (Section 6.1).
  • Ṣayẹwo awọn batiri atagba.
• Drone unstable during flight/drifting:
  • Perform gyroscope calibration (Section 6.2).
  • Use the fine-tuning buttons on the transmitter to correct drift.
  • Check for damaged propellers and replace if necessary.
• No FPV feed on smartphone:
  • Ensure the drone's WiFi is enabled and your phone is connected to it.
  • Restart the drone and the app.
  • Check app permissions on your phone.
• Akoko ofurufu kukuru:
  • Ensure the drone battery is fully charged.
  • Battery life may decrease over time; consider replacing old batteries.

9. Awọn pato

10. Atilẹyin ọja ati Support

TOZO products come with a standard warranty. For detailed warranty information, technical support, or replacement parts, please visit the official TOZO webojula tabi kan si wọn onibara iṣẹ taara.

Official TOZO Store: Visit the TOZO Store on Amazon