Pro-Ject Essential III Recordmaster Turntable User Manual

1. Ifihan

Thank you for choosing the Pro-Ject Essential III Recordmaster Turntable. This high-quality record player is designed to deliver exceptional audio performance with the convenience of integrated speed control, a built-in phono stage, and a USB output for digital recording. This manual provides comprehensive instructions for the proper setup, operation, maintenance, and troubleshooting of your new turntable. Please read it carefully before use to ensure optimal performance and longevity of your device.

Figure 1: Pro-Ject Essential III Recordmaster Turntable (White)

This image shows the Pro-Ject Essential III Recordmaster turntable in its white finish, featuring the platter, tonearm, and the "ESSENTIAL" branding on the plinth. The turntable is ready for operation.

2. Eto ati Apejọ

2.1 Unpacking ati Awọn akoonu

Carefully remove all components from the packaging. Please retain the original packaging for future transport or service.

Apapọ yẹ ki o ni:

• Pro-Ject Essential III Recordmaster Turntable
• Ortofon cartridge (pre-mounted)
• Ohun ija
• RCA ohun afetigbọ
• Ibi ti ina elekitiriki ti nwa
• Wakọ igbanu
• Pẹpẹ
• Di akete
• Ideri eruku

2.2 Ibi

Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

2.3 Apejọ Igbesẹ

1. Fi Platter sori ẹrọ: Carefully place the main platter onto the spindle. Ensure it sits securely and rotates freely.
2. Install the Drive Belt: Locate the drive belt. Gently stretch the belt around the sub-platter (if applicable) and around the motor pulley. Ensure the belt is seated correctly in the groove of the motor pulley and is not twisted.
3. Install the Felt Mat: Gbe awọn ro akete lori oke ti awọn platter.
4. Tonearm Setup:
   • Iwọn iwuwo: Slide the counterweight onto the rear of the tonearm. Rotate it until the tonearm is balanced horizontally (floating freely). Lock the counterweight in place.
   • Ipa Titele: Refer to your cartridge's recommended tracking force (typically 1.5g - 2.0g for the Ortofon OM 10). Adjust the counterweight to the specified tracking force using the scale on the counterweight.
   • Anti-sikate: Attach the anti-skate weight to the small loop on the tonearm support and guide the thread over the anti-skate wire support. The anti-skate force should generally match the tracking force.
     

     Figure 2: Tonearm with Anti-Skate Weight

     Aworan yii pese isunmọ view of the tonearm, highlighting the anti-skate mechanism with its small hanging weight, which helps to balance the forces acting on the stylus during playback.
5. Install Dust Cover: Carefully place the dust cover onto the hinges at the rear of the turntable.
   

   Figure 3: Turntable with Dust Cover Installed

   This image displays the Pro-Ject Essential III Recordmaster turntable with its clear dust cover in place, protecting the components from dust and debris.

2.4 Awọn isopọ

The Essential III Recordmaster features both RCA analog outputs and a USB digital output.

• Ìjáde ohùn RCA: Connect the supplied RCA cable from the "L" (left) and "R" (right) outputs on the turntable to a line-level input (e.g., AUX, CD, Tuner) on your amplifier or active speakers. Since the turntable has a built-in phono stage, you do not need a dedicated "Phono" input on your amplifier.
• Ijade USB: Connect a USB cable (not supplied) from the "OUT USB" port on the turntable to a free USB port on your computer (PC or Mac) for digital recording of your vinyl.
• Asopọ agbara: Connect the power adapter to the "DC IN" socket on the turntable and then plug it into a suitable wall outlet.

olusin 4: Ru Panel Awọn isopọ

This image displays the rear connection panel of the turntable, showing the USB output port, the grounding terminal, and the left (L) and right (R) RCA audio output jacks.

3. Awọn ilana Iṣiṣẹ

3.1 Agbara Tan / Pa

To power on the turntable, press the power button located on the plinth. The platter will begin to rotate. Press the button again to power off the unit.

3.2 Yiyan Iyara

The Essential III Recordmaster supports 33 1/3 RPM and 45 RPM playback speeds.

• To switch between 33 1/3 RPM and 45 RPM, press the speed selection button located next to the power button. The corresponding LED indicator will illuminate.
• For 78 RPM records, a special pulley and stylus are required (not included). Consult your dealer for more information on 78 RPM playback.

3.3 Ti ndun igbasilẹ kan

1. Place a record on the platter, ensuring it is centered on the spindle.
2. Gbe apa ohun orin soke nipa lilo lefa ika.
3. Carefully position the tonearm over the desired starting groove of the record.
4. Rọra sọ apa ohun orin silẹ nipa lilo lefa ika. Awọn stylus yoo sọkalẹ sori igbasilẹ ati ṣiṣiṣẹsẹhin yoo bẹrẹ.
5. At the end of the record, lift the tonearm using the cueing lever and return it to the tonearm rest. Secure it with the tonearm clip.

3.4 USB Gbigbasilẹ

The integrated USB output allows you to digitize your vinyl collection.

1. So turntable pọ mọ kọmputa rẹ nipasẹ okun USB.
2. Install appropriate audio recording software on your computer (e.g., Audacity, available for free online).
3. Select the turntable as the audio input device within your recording software settings.
4. Start playback on the turntable and begin recording in your software.
5. Follow your software's instructions for editing, saving, and exporting your digitized audio files.

4. Itọju

4.1 Ninu

• Turntable Plinth and Dust Cover: Use a soft, lint-free cloth to wipe the surfaces. For stubborn marks, a slightly damp A le lo aṣọ, lẹ́yìn náà a le lo aṣọ gbígbẹ. Yẹra fún àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
• Platter and Felt Mat: The platter can be wiped with a dry cloth. The felt mat can be gently brushed to remove dust.
• Stylus: Use a dedicated stylus cleaning brush or fluid (available from audio retailers) to gently clean the stylus. Always brush from back to front.

4.2 igbanu Rirọpo

The drive belt is a wear item and may need replacement over time if you notice inconsistent speed or slippage. Contact your dealer for a replacement belt. Installation involves carefully stretching the new belt around the sub-platter and motor pulley, similar to the initial setup.

5. Laasigbotitusita

If you encounter issues with your turntable, please consult the following table before contacting support.

6. Awọn pato

7. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Pro-Ject Audio Systems website. You can also contact your authorized Pro-Ject dealer for assistance.

For more information about Pro-Ject products, visit the Pro-Ject Store on Amazon.