Ọrọ Iṣaaju
This manual provides detailed instructions for the installation, operation, and maintenance of your Defiant 1-Light Integrated LED Outdoor Bronze Dusk to Dawn Security Flood Light. This high-performance, low-maintenance lighting solution is designed for dependable area and security illumination. Please read all instructions carefully before installation and use to ensure proper function and safety.
Alaye Aabo
Always observe basic safety precautions when installing or using electrical products to reduce the risk of fire, electric shock, and personal injury.
- IKILO: Ewu ti ina-mọnamọna. Ge asopọ agbara ni fiusi tabi fifọ Circuit ṣaaju fifi sori ẹrọ tabi iṣẹ.
- Ọja yii gbọdọ wa ni fifi sori ẹrọ ni ibamu pẹlu koodu fifi sori ẹrọ ti o wulo nipasẹ eniyan ti o faramọ ikole ati iṣẹ ti ọja ati awọn eewu ti o kan.
- Lo awọn asopọ waya ti a ṣe akojọ si UL nikan.
- Ma ṣe fi sori ẹrọ nitosi awọn ohun elo ijona.
- Rii daju pe gbogbo awọn asopọ wa ni aabo ati idabobo daradara.
- Do not attempt to modify the integrated LED light source. It is not replaceable.
Package Awọn akoonu
Rii daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori ẹrọ.
- Defiant 1-Light Integrated LED Outdoor Bronze Dusk to Dawn Security Flood Light Fixture
- Ohun elo iṣagbesori (awọn skru, awọn eso waya, gasiketi)
- Isakoṣo latọna jijin
- Ilana itọnisọna
Fifi sori ẹrọ
This flood light is suitable for wall or ceiling/eaves mounting. Professional installation is recommended for electrical wiring.
Awọn irinṣẹ ti a beere (Ko si):
- Screwdriver
- Waya Strippers
- Pliers
- Itanna teepu
- Awọn gilaasi aabo
Igbesẹ Igbesẹ:
- Pa agbara: Locate the circuit breaker or fuse box and turn off the power to the area where you will be installing the light fixture.
- Ṣetan dada iṣagbesori: Rii daju pe ilẹ iṣagbesori jẹ mimọ, gbẹ, ati ohun igbekalẹ.
- So awo fifi sori ẹrọ mọ: Secure the mounting plate to the junction box using the provided screws. Ensure the gasket is properly seated to prevent moisture entry.
- Awọn asopọ onirin: Connect the electrical wires according to local electrical codes. Typically, connect the black wire from the fixture to the black (hot) wire from the supply, the white wire from the fixture to the white (neutral) wire from the supply, and the green or bare copper wire from the fixture to the ground wire from the supply. Use wire nuts to secure connections.
- Fi ohun èlò náà sori ẹrọ: Carefully align the fixture with the mounting plate and secure it with the provided screws. Ensure a tight seal against the mounting surface.
- Mu agbara pada: Nígbà tí a bá ti parí ìfìsílẹ̀ àti gbogbo ìsopọ̀mọ́ra, dá agbára padà sí ibi tí ẹ̀rọ ìfọ́mọ́ra náà ti ń ṣiṣẹ́.
Awọn ilana Iṣiṣẹ
Dusk-to-Dawn Functionality:
The Defiant Flood Light is equipped with a built-in photocell sensor that automatically turns the light ON at dusk and OFF at dawn. This feature provides continuous security lighting without manual intervention.
- Ensure the photocell sensor is not obstructed by objects, eaves, or other light sources, as this can interfere with its proper operation.
- The light will activate when ambient light levels drop below a certain threshold and deactivate when light levels rise.
Isẹ Iṣakoso Latọna jijin:
Use the included remote control for additional functionality, such as overriding the dusk-to-dawn sensor or adjusting settings if available. Refer to the remote control's specific instructions for detailed usage.
- Point the remote control directly at the light fixture for optimal response.
- Ensure the remote control batteries are installed correctly and are not depleted.
Itoju
The Defiant LED Flood Light requires minimal maintenance due to its integrated LED design and durable construction.
- Ninu: Lokọọkan nu imuduro pẹlu asọ, damp aṣọ láti mú ìdọ̀tí àti ìdọ̀tí kúrò. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
- Ayewo: Lododun, máa ṣe àyẹ̀wò ẹ̀rọ ìbánisọ̀rọ̀ náà fún àwọn àmì ìbàjẹ́, àwọn wáyà tí kò ní ìwúwo, tàbí ìbàjẹ́. Ẹ ṣe àtúnṣe sí àwọn ìṣòro náà kíákíá.
- Igbesi aye LED: The integrated LED has a long lifespan of approximately 50,000 hours and does not require bulb replacement.
Laasigbotitusita
If your flood light is not functioning as expected, refer to the following common issues and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ìmọ́lẹ̀ kì í tan ní àṣálẹ́. | 1. Agbara wa ni pipa. 2. Photocell obstructed or receiving too much light. 3. Aṣiṣe onirin. | 1. Ṣayẹwo Circuit fifọ / fiusi. 2. Clear obstructions from photocell. Relocate if necessary to an area with less ambient light. 3. Verify all wiring connections are secure. Consult an electrician if unsure. |
| Imọlẹ duro lori nigba ọjọ. | 1. Photocell obstructed or faulty. 2. Light from another source (e.g., street light) is activating the sensor. | 1. Clear obstructions from photocell. Ensure it is clean. If issue persists, photocell may be faulty. 2. Reposition the fixture or shield the photocell from external light sources. |
| Ina flickers tabi dims. | 1. Loose onirin asopọ. 2. Awọn iyipada agbara. 3. Ese LED oro. | 1. Check and secure all wiring connections. 2. Consult an electrician to check power supply. 3. If integrated LED is faulty, the unit may need replacement. |
| Isakoṣo latọna jijin ko ṣiṣẹ. | 1. Awọn batiri ti o ku. 2. Obstruction between remote and fixture. 3. Remote not paired (if applicable). | 1. Rọpo awọn batiri. 2. Ensure clear line of sight to the fixture. 3. Refer to remote control instructions for pairing process. |
Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | Alatako |
| Nọmba awoṣe | DW8938ABZ-B |
| Imọlẹ Orisun Orisun | LED ti a ṣepọ |
| Wattage | 125 watt |
| Imọlẹ | 1800 lumen |
| Voltage | 120 Volts (DC) |
| Àwọ̀ | Idẹ |
| Ohun elo | Idẹ |
| inu ile / ita gbangba Lilo | Ita gbangba |
| Pataki Ẹya | Dusk-to-Dawn |
| Ọna Iṣakoso | Ohun èlò, Iṣakoso Latọna jijin |
| Iṣagbesori Iru | Oke Oke, Odi Oke |
| Iṣẹ ṣiṣe | Energy Star Certified, 50,000 hour lamp igbesi aye |
| Iwọn Nkan | 3.93 iwon |
| Ọja Mefa | 8.4 x 7.2 x 7.9 inches |
| UPC | 008938104784 |
